SOLT GGSHPD800W Heat Pump Dryer User Guide
- June 13, 2024
- SOLT
Table of Contents
SOLT GGSHPD800W Heat Pump Dryer
Product Information
Product: 8kg Heat Pump Clothes Dryer
Model: GGSHPD800W
Product Usage Instructions
- Before using, make sure the tumble dryer is installed correctly. Follow the installation instructions in the user manual.
- Place the dryer on a firm and level surface for quiet and safe operation. If you want to stack the dryer above your washing machine, you must purchase a stacking kit and have it installed by a qualified person. Ensure there is sufficient ventilation and avoid placing the dryer in an area where dirt can accumulate.
- Plug in the dryer.
- Load the laundry into the dryer.
- If using the dryer for the first time, refer to the installation instructions in your User Manual (Page 7).
- If drying after transportation, follow the instructions in your User Manual (Page 9).
- Select the desired program and load settings according to the instructions in your User Manual.
- After drying, remove the clothes from the dryer.
- The buzzer will beep and display “0:00” indicating the end of the drying cycle.
- Select the next program or turn off the dryer as required.
- If you need assistance, contact our friendly support team via phone at 1300 11 4357 or email at support@productcompany.com.au.
For detailed operation instructions, please refer to your user manual.
Before First Use
Before installing your new Heat Pump Dryer please ensure you have read all safety instructions in the user manual.
Installation
Place the dryer on a firm and level surface for quiet and safe operation. If you wish to stack your dryer above your washing machine you must purchase a stacking kit and ensure it is installed by a qualified person. Please make sure that there is sufficient ventilation and it is not placed in an area where dirt will accumulate. Before using your dryer for the first time:
- Ensure the appliance is correctly installed as per the installation instructions in your User Manual.
- Leave the appliance to stand for 2 hours after transportation.
- Prepare the dryer by running one cycle as per the instructions in your User Manual.
Quick Start Instructions
- Plug in your dryer.
- Load in wet laundry.
- Close the door.
- Press the On button.
- Select program.
- Press Start button.
Get in Touch
Need help? Contact our friendly support team via the contact details below.
Phone / 1300 11 4357
Email /
support@residentiagroup.com.au
For more information please call 1300 11 43 57
WWW.SOLT.HOUSE