BATTAT WH1265Z R-C Monster Truck Waves Instruction Manual

BATTAT WH1265Z R-C Monster Truck Waves

Product Information

The product is a radio-controlled monster truck manufactured by Battat. It requires 4 x AA (1.5V) batteries for the truck and 2 x AAA (1.5V) batteries for the remote control. The package includes the required AA batteries for the truck, but the AAA batteries for the remote control are not included. The product is suitable for children above 3 years of age and comes with a warning regarding small parts that pose a choking hazard. The monster truck has an ON/OFF switch and can automatically go into sleep mode after 30 minutes of inactivity to save power. To wake it up, press on the monster truck’s roof. If the monster truck disconnects from the controller, switch it OFF and back ON again, then press the RESET BUTTON on the back of the remote. The product also provides steering alignment adjustment instructions. If the vehicle drifts to the right, turn the lever towards the left (L).

Product Usage Instructions

1. Make sure the ON/OFF switch on the monster truck is in the ON position.
2. Press on the monster truck’s roof, as indicated in Fig. 4.
3. Press any button on the remote control, as indicated in Fig. 3.
4. The monster truck will automatically go into sleep mode after 30 minutes of inactivity. To wake it up, press on the monster truck’s roof.
5. In case the monster truck disconnects from the controller, switch the truck OFF and back ON again. Then, press the RESET BUTTON on the back of the remote.
6. To replace the batteries of the truck, use 4 x AA (1.5V) batteries. The required batteries are included in the package.
7. To replace the batteries of the remote control, use 2 x AAA (1.5V) batteries. The required batteries are not included in the package.
8. For steering alignment adjustment, if the vehicle drifts to the right, turn the lever towards the left (L).

TO START PLAYING

1. Make sure the ON/OFF switch on the monster truck is in the ON position (Fig. 1).
2. Press on the monster truck’s roof, as indicated in Fig. 4, then press any button on the remote, as indicated in Fig. 3.
3. The monster truck will automatically go into sleep mode after 30 minutes of inactivity to save power. Wake up by pressing on the monster truck’s roof, as indicated in Fig. 4.
4. In case the monster truck disconnects from the controller, switch the truck OFF and back ON again (Fig. 1). Then, press the RESET BUTTON on the back of the remote (Fig. 2). Continue with step 2.

Troubleshooting

• For best performance replace with alkaline batteries on rst use.
• Frequency bands: 2420MHz-2465MHz Maximum radio-frequency power: 5dbm

WARNING!: SMALL PARTS – CHOKING HAZARD. Not suitable for children under 3 years

Alignment lever

STEERING ALIGNMENT ADJUSTMENT
If the vehicle does not drive in a straight line, adjust the alignment using the alignment lever. If the vehicle drifts to the left, turn the lever towards the “R”. If the vehicle drifts to the right, turn the lever towards the “L”.

• Please remove all packaging materials before giving to children.

1. Do not use near seawater or in dirty and dusty environments.
2. Do not use in the rain or immediately after rainfall.
3. If the monster truck gets wet, open the battery compartment immediately, remove the batteries, and turn the truck upside down to dry.
4. Always clean and dry the monster truck and remote after using outdoors to avoid damage.
5. The remote’s control distance may be reduced when used indoors.
6. The monster truck’s remote control may not work after long storage. Follow the steps below to re-start:
   • Always replace the batteries in the monster truck with 4 new AA alkaline batteries (Fig. 1). B) Follow steps 1 and 2 to start playing. C) If the monster truck does not work, put 2 new AAA alkaline batteries in the remote (Fig. 2). D) Follow steps 1 and 2 to start playing.

BATTERY ADVICE

Requires 4 x AA(1.5V) batteries for the truck (included) Requires 2 x AAA(1.5V) batteries for the remote control (not included) Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the toy before being charged. Rechargeable batteries are only to be charged under adult supervision. Different types of batteries or new and used batteries are not to be mixed. Only batteries of the same or equivalent type as recommended are to be used. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the toy. The supply terminals are not to be short-circuited. ATTENTION: When the module’s functions lose performance, follow instructions carefully to install new batteries.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>