KONIX 82541120664 PAC MAN Bluetooth Headset User Manual

BLUETOOTH HEADSET
FOR SMARTPHONES & TABLETS

USER MANUAL
PAC-MAN Bluetooth Headset

PACKAGE CONTENTS

PRODUCT DIAGRAM

1. Voice assistant button
2. Volume up (+)
3. Multifunction button
4. Volume down (-)
5. Microphone
6. 3.5mm Audio jack
7. Charging Port
8. LED indicator

CHARGING

1. Connect one end of the USB C cable to the USB C port on the headset and the other end to a power source.
2. The LED turns red while the headset is charging.
3. The LED turns off when the headset is fully charged.
4. The headset cannot be turned on while charging.

| Red light flashing every 30 seconds| Low battery
---|---|---
| Steady red light| Charging in progress
| Light off| Fully charged
| Blue and red lights flashing alternately| Connection lost

POWER ON/OFF

Power on| Press and hold the multifunction button for 3s| Blue LED flash alternately, sound signal in rising tone
---|---|---
Power off| Press and hold the multifunction button for 3s| Quick red LED flash, sound signal in falling tone

BLUETOOTH PAIRING

• Power on the headset; the headset automatically enters pairing mode when turned on.
• In case the headset is not in pairing mode, keep on long pressing the multifunction button for 5s to turn on the Bluetooth pairing mode, until the LED starts flashing alternately blue and red.
• On your device, select « KX-PACMAN-GH» from the Bluetooth device list to pair the headset.

Successful connection| Connection to a device from the device list or automatic reconnection to a device| Steady blue LED for 3s
---|---|---

CONTROLS

AUX-IN

• Plugging in a 3,5mm cable will automatically switch to AUX-IN mode, and Bluetooth mode will turn off.
• When using AUX-IN mode, audio and volume control need to be done on the device.

OTHER FUNCTIONS

• If the headset is left idle and link is lost, the blue and red LEDs will flash alternately
• If the headset is running on low battery, then the red LED will flash 2 times every 30 seconds until it is plugged into a charging source.

TROUBLESHOOTING

Q: My device doesn’t find the headset on the Bluetooth device list
→ Check if the Bluetooth headset is powered on; if it is powered on and still doesn’t connect, reboot both devices.
Q: After connecting the headset, disconnection or noise occurs.
→ Check if the headset is sufficiently charged.
→ There may be obstruction between both devices, or the Bluetooth range may be overextended.

SPECIFICATIONS

SAFETY INFORMATION

• Do not place the headset in a high temperature environment or directly exposed to the sun.
• Do not place the headset in an excessively moist environment or submerged into water, keep the headset dry.
• To prevent hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. Noise levels are measured in decibels (dB). Exposure to any noise at or above 85 dB can cause gradual hearing loss.
• Do not use the headset in an unsafe environment: while operating a vehicle, crossing streets, or during any activity or in any environment where your full attention to your surroundings is required.

Warning: Prolonged listening to music at high volume can cause permanent hearing damage.

Regulatory compliance information

If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive)

www.konix-interactive.com

©2023 Konix. Innelec Multimedia – Konix, 45 rue Delizy, 93692 Pantin Cedex, FRANCE.
The Konix brand is a trademark of Innelec Multimedia S.A. All other trademarks are the property of their respective owners. Photos and illustrations are not binding.
All rights reserved. Made in PRC.

PAC-MAN™ & ©Bandai Namco Entertainment Inc.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>