MAGTEK U73-21074YXX DynaFlex II GO Compact Installation Guide
- June 1, 2024
- MAGTEK
Table of Contents
MAGTEK U73-21074YXX DynaFlex II GO Compact
Product Information
- Specifications:
- Product Name: DynaFlex II GO
- Model: BGM220P
- Type: Module Level Integration Guide
Product Usage Instructions
- Integration Rules:
- To integrate the BGM220P module into the DynaFlex II GO system, follow these rules:
- Ensure compatibility between the BGM220P module and the DynaFlex II GO system.
- Follow the provided integration guide step-by-step for seamless integration.
- Configure the settings of the BGM220P module according to the DynaFlex II GO requirements.
- Test the integrated system thoroughly to ensure proper functionality.
FAQs
- Q: What should I do if the integration process fails?
- A: If the integration process fails, double-check the connections, settings, and compatibility between the BGM220P module and DynaFlex II GO. You may also refer to the troubleshooting section of the integration guide.
- Q: How can I verify the successful integration of the BGM220P module?
- A: After integration, test the communication between the BGM220P module and DynaFlex II GO by sending and receiving data. Monitor for any errors or inconsistencies in the operation.
Introduction
- DynaFlex II GO (D2G) utilizes the Bluetooth module BGM220P from Silicon Laboratories for communications to Bluetooth networks.
- Although the BGM220P has its own FCC and ISED certification number, MagTek Inc. has completed a change of ID to incorporate the module into our product.
- This is because we cannot meet the minimum distance from the module to the human body as required by the modules’ approvals.
- The change of ID has allowed us to perform SAR testing on our product to ensure we are under the RF exposure limits.
Rules To Integrate
Rules to integrate BGM220P into DynaFlex II GO
- Do not modify the module electrically.
- Place the module aligned to the edge of the D2G MLB, as recommended in the datasheet.
- Leave the antenna clearance area void of any traces, components, or copper on all layers of the D2G MLB.
- Avoid plastic or any other dielectric material in contact with the antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>