amazon basics B07GF5F3GP Entry-Privacy Passage Knob User Manual
- June 13, 2024
- amazon basics
Table of Contents
Entry/Privacy/Passage-Kno b
Entry
BO7GF5F3GP, BO7GFBZ8ZW, BO7GDWVSTW, BO7GDRHR47,
BO7GF5FTLN, BO7GF58FPG, BO7GF7VNMZ, BO7GDQNK71,
B0O7GDWZ975, BO7GDRZXSS, BO7GDWZB74, BO7GF4N27S,
BO7GF4X7QW, BO7GDWZB78, BO7GDWZDV4, BO7GDQLJQQ,
BO7GF9PGZJ, BO7GF4TKZS, BO7GDRZVYV, BO7GDQLV61, BO7GF7VNRC, BO7GF5F3LF,
BO7GF5F9C9, BO7GDRHSPT, BO7GDRZXXJ, BO7GF582G8, BO7GF54D91, BO7GDXCX6G,
BO7GF5FICT, BO7GDWZ9BS| Privacy
BO7GDWYYX2, BO7GDRZYFP, BO7GDQM2N4,B07GDWYXHX,
B07GDQLQQZ, BO7GDWYXJK, BO7GF5F3HZ, BO7GF58DQK,
BO7GF586K9, BO7GDQLV46, BO7GDWV4N6, BO7GDWVSC7,
BO7GF58DRM, BO7GDWV545, BO7GDWYXKQ, BO7GDWV8D7,
BO7GDWZFNQ, BO7GF583MC, BO7GF586MC, BO7GFBZ94B,
BO7GF5F9CM, BO7GF54D8K, BO7GDQM2SH, BO7GF4MRCT,
B07GDWV56G, BO7GF4ZCPP, BO7GF582GR, BO7GDWZ9C4,
B0O7GDQNP7M, BO7GF58DVK| Passage
BO7GF5F97V, BO7GFAMXS5K, BO7GFOPGWX, BO7GF4N26C, BO7GFIPGX1, BO7GDWZFLL,
BO7GDWZB6H, BO7GDWZDT1, BO7GDWV89W, B07GDWZDT3, BO7GDRZYHM, BO7GDWV8BV,
BO7GF5FMIM, BO7GDRHSMQ, BO7GF4N281, BO7GF5F3KH, BO7GF586M1, BO7GDWV55C,
BO7GDRZVZ3, BO7GDRZN8M, BO7GDQNKB1, B07GDQM259, BO7GDWYZ28, BO7GDRZYKR,
BO7GF5FICL, BO7GF4X7TR, BO7GF58FSY, BO7GDWZB9F, BO7GDWZB9G, BO7GDWZFQ8
---|---|---
Welcome Guide
1.1 Contents:
Before getting started, ensure the package contains the following components:
Entry
- Lock body x1
- Latch x1
- Strike plate x1
- Keys x2
- Phillips head wood screws for the latch plate x2
- Phillips head wood screws for the strike plate x2
- Phillips head machine screws for attaching the lock body x2 Privacy
- Lock body x1
- Latch x1
- Strike plate x1 I Safety key x1
- Phillips head wood screws for the latch plate x2
- Phillips head wood screws for the strike plate x2
- Phillips head machine screws for attaching the lock body x2 Passage
- Lock body x1 I Latch x1 I Strike plate x1
- Phillips head wood screws for the latch plate x2
- Phillips head wood screws for the strike plate x2
- Phillips head machine screws for attaching the lock bodyx2
1.2 Recommended Tools
- 1″ (25 mm) Wood drill bit
- 2-1/18″ (54 mm) Hole saw b Level
- Phillips screwdriver
- Hammer Pencil
- ape measure
- Safety glasses
- Tape
- Wood chisel
Before First Use
- Check for transport damages.
Risk of suffocation! Keep any packaging materials away from children — these materials are a potential source of danger, e.g. suffocation.
Steps 1 through 4 are for new doors that have no pre-drilled holes. Steps 6, 7 and 8 are for doors that already have holes in them.
Installation
Step 1: Mark Door
- Fold the template at the dotted line and tape the template onto the interior side of the door at 34″ to 48″ (86 to 122 cm) from floor.
- Measure the thickness of the door and mark either the 1-3/4″ or 1-3/8″ (44 or 37 mm) hole.
- Mark either the 2-3/8″ or 2-3/4″ (60 or 70 mm) hole for the backset.
Step 2: Drill Holes
- Drilla 2-1/8″ (54 mm) hole through door face as marked for the lock body.
- Drilla 1″ (25 mm) hole in the center of the door edge for the latch.
Step 3: Install Latch Plate
- Insert the latch into the hole, keeping it parallel to the door face. Outline face plate with a pencil and remove the latch.
- Chisel 1/8″ (3 mm) deep or until the latch face is flush to the door edge.
- Insert latch and tighten screws.
Step 4: Install Striker Plate
- With the latch assembly installed partially close the door until the latch assembly is just inside the door jamb. Mark 2 lines on the face of the door indicating the top and bottom of the latch plate. Measure 1/4″ (6 mm) inward from the door stop. Using the striker plate, align it with the lines and draw around the strike plate and mark your hole locations.
- Drilla 1″ (25 mm) hole that is 1/2″ (13 mm) deep into the door jamb on the centerline of the screws.
- Chisel 1/16″ (1.6 mm) deep for the strike plate.
- Install strike plate and tighten screws. Adjust the lang on the strike plate by bending it in or out to eliminate looseness or to tighten the fit between the door and the door stop.
Step 5: Install Exterior Knob
- Remove old door knob / lever assembly from door.
Step 6: Install Exterior Knob
» Insert new latch and tighten down with screws.
Step 7: Install Exterior Knob
» Install knob with spindle into latch making certain that stems are
positioned correctly through latch hole. Press flush against door.
Step 8: Install Interior Knob
Insert interior knob by placing on connect bar and aligning screw holes with
stems push flush against the door insert screw and tighten.
Step 9: How to Adjust the Latch
- The latch preset is at a 2-3/8” (60 mm) backset, which is standard for most doors.
- To change the latch to 2-3/4″ (70 mm), push the square cut-out backward. To change back to 2-3/8″ (60 mm) push the square cut-out forward.
- To change the latch to 2-3/4″ (70 mm), push forward on the plastic lever slide. To change back to 2-3/8″ (60 mm) pull back on the plastic lever slide.
Privacy Lever Safety Key
- Included in this kit is an emergency safety key that can be used to unlock the door knob in the event it becomes locked from the inside.
- Insert the safety key into the slot and turn the key counter-clockwise to unlock the door knob.
Cleaning and Maintenance
Check the components regularly to make sure all screws and bolts are tightened.
Feedback and Help
We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review. Scan QR Code below with your phone camera or QR reader:
https://www.amazon.com/review/review-your-purchases/listing/?ref=HPB_UM_CR
If you need help with your Amazon Basics product, please use the website or number below.
amazon.com/gp/help/customer/contact-us
+1877-485-0385 (US Phone Number)
Documents / Resources
|
amazon basics B07GF5F3GP Entry-Privacy Passage
Knob
[pdf] User Manual
B07GF5F3GP Entry-Privacy Passage Knob, B07GF5F3GP, Entry-Privacy Passage Knob,
Passage Knob, Knob
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>