EATON U280M-005-10-BK Magnetic Wireless Charging Pad User Guide

EATON U280M-005-10-BK Magnetic Wireless Charging Pad

Product Information

The Magnetic Wireless Charging Pad is a 10 Watts charging pad designed for magnetic-charging compatible smartphones. It comes with a built-in USB-C connector and is compatible with Apple iPhone models (iPhone 13, iPhone 13 Pro, iPhone 12, iPhone 12 Pro) and Apple AirPods (AirPods Pro, AirPods 3rd Generation, AirPods with Wireless Charging Case 2nd Generation). The charging pad requires a USB-C power adapter (up to 9V 2.2A) as a power source.

Specifications:

• Connector: USB-C (Male)
• Output: Mag-Safe Charging Strip
• Cable Length: 5 ft. (1.52 m)
• Operating Humidity Range: 10% to 80% RH
• Storage Humidity Range: 5% to 95% RH
• Unit Dimensions: 2.48 x 0.66 in. (63 x 16.7 mm) Depth

Product Usage Instructions

1. Connect the charging pad’s built-in USB-C connector to a USB-C power adapter, such as Eaton Corporation’s U280-W01-20C1-G (sold separately). Alternatively, connect the charging pad’s built-in USB-C connector to an available USB-C port on a laptop or computer that is being powered by an external power source.
2. Place a magnetic-charging compatible smartphone on the charging pad, ensuring you follow all recommended safety tips mentioned in the General Safety Instructions section.
3. Remove the charging pad from its power source once your device is fully charged.

Note : It is important to read and follow the General Safety Instructions provided in the user manual for safe usage of the product.

Warranty & Product Registration
The Magnetic Wireless Charging Pad comes with a 1-Year Limited Warranty. The seller warrants the product to be free from original defects in material and workmanship for a period of one (1) year from the date of initial purchase. In case of any defects, the seller will repair or replace the product at their sole discretion. To register your new product and be eligible for a chance to win a FREE Eaton Tripp Lite series product, visit Tripplite.Eaton.com/warranty.

Regulatory Compliance
The device complies with Part 18 and Part 15 of the FCC Rules. It should not cause harmful interference and must accept any interference received. Any changes or modifications not approved by the responsible party for compliance may void the user’s authority to operate the equipment.
For detailed information on electric field emissions and magnetic field emissions, refer to Part 18.213(c) and KDB 784748 Annex A section A.5. The maintenance of the system is the responsibility of the manufacturer.

WARRANTY REGISTRATION
Register your product today and be automatically entered to win an ISOBAR® surge protector in our monthly drawing! tripplite.com/warranty

Product Features

• Wirelessly charges magnetic-charging compatible smartphones with up to 10W of power
• Compatible with iPhones (iPhone 12 or later) and other smartphones that support magnetic charging (see Specifications for full list of supported Apple devices)
• An adjustable stand can be used for vertical or horizontal phone placement while charging
•  Built-in USB-C input cable is compatible with power adapters up to 9V 2A
• Magnetic charging pad secures device in place while charging
• Supports over-current, over-voltage and over-temperature protection
• Plug-and-play, no software or drivers required

Package Contents

• U280M-005-10-BK
• Quick Start Guide

General Safety Instructions

• Only connect the charging pad to power adapters that do not exceed 9V 2A.
• Make sure to unplug the charging pad from its power source when charging has completed.
• Do not place the charging pad near heat sources or open flames.
• Do not place metal objects on top of a phone that is currently charging on the magnetic charging pod.
• Avoid using the charging pad in temperatures which exceed the maximum recommended operating temperature of 104°F (40°C) (see Specifications for details).
• Do not place the charging pad near water sources or attempt to operate it after being exposed to water.
• Do not expose the charging pad to corrosive cleaning substances.
• Do not attempt to use the charging pad if the built-in charging cable is damaged or with a damaged power adapter.

Optional Accessories

• U280-W01-20C1-G Compact 1-Port USB-C Wall Charger, 20W

Operation

1. Connect the charging pad’s built-in USB-C connector to a USB-C power adapter, such as Eaton Corporation’s U280-W01-20C1-G (sold separately). OR Connect the charging pad’s built-in USB-C connector to an available USB-C port on a laptop or computer that is being powered by an external power source.
2. Place a magnetic-charging compatible smartphone on the charging pad. Make sure to follow all recommended safety tips in the General Safety Instructions section.
3. Remove the charging pad from its power source once your device is charged.

Specifications

Connector

Input| USB-C (Male)
Output| Mag-Safe Charging Strip
Cable Length| 5 ft. (1.52 m)
Compatibility
Compatible Devices| Apple iPhone (iPhone 13, iPhone 13 Pro, iPhone 12, iPhone 12 Pro), Apple AirPods (AirPods Pro, AirPods 3rd Generation, AirPods with Wireless Charging Case 2nd Generation)
Power Source| USB-C Power Adapter (up to 9V 2.2A)
Charging Output| 10W
Physical
Operating Temperature Range| 32°F to 104°F (0°C to 40°C)
Storage Temperature Range| -4°F to 104°F

(-20°C to 40°C)

Operating Humidity Range| 10% to 80% RH
Storage Humidity Range| 5% to 95% RH
Unit Dimensions [Circumference x Depth]| 2.48 x 0.66 in. (63 x 16.7 mm)

Warranty & Product Registration

1-Year Limited Warranty
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of one (1) year from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, at its sole discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction.)
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application.

Product Registration

Visit Tripplite.Eaton.com/warranty today to register your new product. You’ll be automatically entered into a drawing for a chance to win a FREE Eaton Tripp Lite series product!*

• No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Regulatory Compliance

FCC Warning
This device complies with Part 18 and part 15 of the FCC Rules.
Operation is subject to the following two conditions:

• (1) This device may not cause harmful interference, and
• (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC Warning
This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1.  This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Refer to Part 18.213(c) and KDB 784748 Annex A section A.5:

• (a) Max. Electric Field Emissions: 0.6518V/m Max. Magnetic Field Emissions: 0.6254V/m
• (b) The maintenance of the system is the responsibility of the manufacturer.
• (c) To prevent interference, the product should be as far away from devices operating at the same frequency as possible.

WEEE Compliance Information for Eaton Corporation
Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Eaton Corporation they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.
Eaton Corporation has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products.
10000 Woodward Avenue, Woodridge IL 60517, USA tripplite.com/support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>