Veho VDC-001-KZ1-F Muvi Drive Cam User Guide

Veho VDC-001-KZ1-F Muvi Drive Cam User Guide

Introduction

The Muvi Drive Cam is perfect to capture your journey in full HD 1080p. This manual will show you how to operate the camera, the Muvi Drive Cam app, and maintenance tips for your camera.
Please read and follow this manual carefully to ensure that you maximise every capability of the Drive Cam. Keep this manual safe for future reference.
Veho cannot guarantee that all incidents will be captured by the Muvi Drive Cam.

1. What’s in the box?

1. Muvi Drive Cam camera
2. 12v Power adapter
3. Adhesive windscreen bracket
4. Quick start guide
5. Software/manual CD

2. Guide to controls

1. Mode
2. Power button
3. AV in
4. Micro USB/Power port
5. MicroSD slot
6. Reset
7. HDMI output slot
8. Arrow keys
9. Snapshot
10. Volume
11. SOS file lock
12. Menu/Return
13. Wifi
14. Rec/OK
15. Microphone
16. Display sleep

3. Installing the Drive Cam

1. Ensure both the inside and outside of the windscreen are clean and dry, this will ensure the mount sticks securely, and that the cameras view is not obstructed.
2. Position camera so that it will not obstruct the driver’s view (we recommend behind the rear-view mirror).
3. Stick the mount into position, ensuring it is fully secure.

4. Charging the Drive Cam

We recommend fully charging the Muvi Drive Cam before its first use. To charge the camera use the 12v cable supplied, attach the corresponding ends into the corresponding ports. We recommend leaving the camera connected to a power source at all times when in use.

5. LED indicators

6. Using the Drive Cam

Power on/Power off
Press the Power Button’ once to power on the camera; a solid red indicator light will appear and the device loading screen will turn on. When using the camera for the first time you will be prompted to set the language, time, and date. The GPS will sync automatically. Once on, press the Power Button’ once to view Path Analysis’ screen. This will show you the statistics of your drive. Powering off the camera is done by pressing and holding thePower Button’ for approximately two seconds; the red indicator light will disappear and the screen will shut down before the camera turns off.

Video recording
When on the home screen to begin recording press the `Record Button’ for approximately one second; the indicator LED will flash slowly and the timer will appear on the screen.
The camera will also automatically switch on and begin recording when connected to the power source.

To stop recording press the `Record Button’ once again, the file will be saved to the microSD card automatically; the LED indicator will turn solid red and the timer will stop.
The camera automatically loop records, overwriting the oldest footage on the card replacing it with new footage. If you wish to save footage from the SD card, you will need to save it externally.

Audio recording
Press the MIC Button’ to mute or unmute the microphone. A microphone icon will appear on the screen indicating whether the microphone is on or off. You can also use theMIC Button’ to turn the display on or off by holding it down for two seconds.

Playback mode
To playback footage on the camera press the Mode Button’ once, this will bring up the latest recorded file; use the up and down arrows to scroll through all the saved footage. To play footage press theOK Button’, to pause the footage at any point please press the OK Button’ again. To get back to the home screen press theMenu Button’.

MicroSD card
Before using a new microSD card you will need to format the card in the camera settings. We recommend formatting your microSD card at least once every two weeks, this will ensure invisible memory is cleared and also reduce the risk of file corruption. Formatting the card will completely wipe all data from the card, ensure that any files you wish to keep are saved externally. If formatting through a computer ensure the card is in FAT32 format.
Supports microSD cards up to 128GB.
Please note Veho is not responsible for the loss of any data.

7. Settings

To access the camera settings press the Menu Button’. Browse the menus by using theUp and Down’ arrows. To select a category press the `OK Button’.
Below are some of the settings you can edit:

• Date/Time
• Volume
• Language
• Screen Saver
• Display Brightness
• Flicker Reduction
• Format Memory Card
• Factory Reset
• Firmware Version
  To exit the menu press the `Menu Button’ again, this will return you to the home screen.

8. Drive Cam App

WARNING
DO NOT USE THE APP WHILST DRIVING!
Downloading and installing
On your mobile device, turn the wifi on and download the `Muvi Drive Cam’ app from Google Play or Apple Store.

Connecting to the App

1. Firstly, press and hold the `Wifi Button’ on the camera until you see a wifi activation message.
2. Go to wifi settings on your mobile device, find and select the network MuviDriveCam’, enter the password:12345678′. A blue LED indicator light will appear on the camera and the screen will read `Wifi Connected’.
3. Launch the Muvi Drive Cam app and click on the `Camera Button’ in the app. The first time you use the app you may be asked to set preference settings.
4. You can now use the Muvi Drive Cam app.
5. To disconnect the wifi, press the up or down arrow.

Using the App
Once you have successfully selected the camera, the home screen will open displaying a live view from the camera. Use the following icons to navigate the app.

9. Drive Cam Player

Installing the Player
To install the Muvi Drive Cam Player insert the supplied software CD into your PC; if you do not have a CD drive you can download the software from our website at: https://veho-world.com/downloads

Connecting to the Player
Use the supplied Micro USB data cable to connect your Muvi Drive Cam to your PC. Next, open the Muvi Drive Cam Player, the shortcut icon should be on your home screen.

Using the Player
Once open, use the player to browse previously recorded footage using the dropdown menu File > Open, the footage will open in the player window. Use the icons to play, skip forward, skip backwards, pause, capture screenshots and view route map.
Note: If you can not see the files when browsing try changing the search to `MP4′ files.

Icons

10. Specifications

11. Maintenance tips

• Do not disassemble, repair, modify your camera or power related accessories.
• Do not adjust or operate camera whilst driving.
• Avoid installing the camera where it may obstruct the driver’s view or airbag deployment.
• Avoid exposing your camera to extended periods of humidity and/or heat. This may reduce the product’s lifespan.
• Do not spray water or cleaning agents directly onto the camera. This may cause a fire, electric shocks, or other malfunctions.
• Only use the Muvi Drive Cam power adapter supplied with your camera.

Other power

Support
In the event you need to contact Veho for support or troubleshooting for your Muvi Drive Cam, please contact us via our Live Chat on our website at: veho- world.com

References

• Veho
• DOWNLOADS | veho

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>