EVOFOX Elite X Wireless Controller User Guide

EVOFOX Elite X Wireless Controller

Product Overview

POWER ON
PRESS THE EVOFOX BUTTON

FIRST USE
THE FIRST USE MAY REQUIRE TO RESET THE GAMEPAD

POWER OFF

1. SLEEP AFTER 60 SEC OF DISCONNECTION.
2. TURNS OFF AFTER 5 MIN OF NO ACTION.

IN THE BOX

CHARGING THE GAMEPAD

SETUP THE GAMEPAD

COMPATIBILITY – SUPPORTED WINDOWS VERSION - > Windows 7, 8, 10,11 1

1. Connect the USB Receiver in a free USB port on your PC
2. Press the EvoFox button to turn the Gamepad ON

GAMEPAD ALWAYS STARS IN X-INPUT MODE

FIRST TIME SETUP MAY REQUIRE A PRESS OF THE RESET BUTTON AFTER PLUGGING IN THE USB RECEIVER.

CHANGING MODES IN WINDOWS PC

X-Input <-> D-Input

Long Press EvoFox Button, until the LED indicators change.

EASY CLICK SETUP

Enter EASY CLICK Setup

1. Long Press EZ + EZ Click R or EZ Click L Button
2. Setup the MACRO using following buttons
3. TWO BUTTONS CAN NOT BE USED IN COMBINATION
4. UP TO 8 BUTTONS CAN BE USED TO CREATE THE MACRO
5. Now Press EZ Click R or EZ Click L button to exit the MACRO Set Up.
6. CLEAR MACRO’S
   Long Press EZ© Button, to clear the MACRO Until the LED Flashes and Gamepad Vibrates.
   Your MACRO is now cleared.

TURBO SETTINGS

Enter the TURBO Speed Function:

• ENABLE: Press the TURBO button and one of the following buttons.
• DISABLE: Press Clear + Button to which TURBO is assigned.

Adjust TURBO Speed:
Press the TURBO button with the DPAD to increase or decrease the turbo speed.

Clear ALL TURBO Setting:
Long Press Turbo Button until the Gamepad Vibrates

CHANGING VIBRATION LEVELS

ENHANCE JOYSTICK PRECISION

• Enable Joystick Precision
  • Press EZ + LEFT JOYSTICK
• Disable Joystick Precision
  • Again Press EZ + LEFT JOYSTICK

RESET THE GAMEPAD

In the unlikely event the Gamepad is not responsive, use a pin to press the RESET button located at the back.

TROUBLESHOOTING

• Why is the Gamepad not being detected by my computer?
  • Make sure the computer USB port is working. Try a different USB Port.
• Why is the Gamepad Disconnecting?
  • Make sure your Gamepad is fully charged.
  • Ensure clear line of sight while using the Gamepad.
  • Depending on your setup you may need to use a USB Extender Cable.
• Why is the Gamepad not working in all my games?
  • Ensure that the game has support for Gamepads.
  • Set the Gamepad mode to D-Input and try again.
• Why is the Gamepad not vibrating?
  • Not all Games have vibration or the vibration setting needs to be turned on (in the game).

SPECIFICATIONS

WARRANTY STATEMENT

Amkette EvoFox Elite X PC Wireless Gamepad is backed by a 1 year performance warranty against any manufacturing defects in material or workmanship from the date of original purchase. This warranty entitles the purchaser to get the product repaired or replaced under the following conditions:

• The warranty applies to the original purchaser. Proof of original purchase is required.
• The warranty does not cover the damage caused by misuse, abuse or improper storage.
• In no event shall Amkette be responsible for any direct, incidental, consequential or other damages of any kind.

Please contact our Technical Support Line and/or send the defective product, postage pre-paid, together with the proof of purchase to our Customer Care Service Center to avail warranty service. Return postage will be paid by us.

CUSTOMER CARE SERVICE CENTER

Amkette House, C-64/4, Okla, Phase-II, New Delhi-110020 1800-11-9090 (Toll Free) (9:30 AM – 6:00 PM)
+919312691448
(9:30 AM – 6:00 PM)
techsupport@amkette.in

FOR HASSLE FREE SERVICE REGISTER YOUR PRODUCT AT WWW.AMKETTE.COM/REGISTER

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>