EPSON EX11000 3LCD Full HD 1080p Wireless Laser Projector User Guide

: June 13, 2024
: Epson

EPSON EX11000 3LCD Full HD 1080p Wireless Laser Projector

Product Information

Product Name: EX11000
Quick Setup
Before using the projector, make sure to read these instructions and the safety instructions in the online User’s Guide.

Connectivity Options:
The projector can be connected to various devices using the following connections:

HDMI cable
VGA cable
USB cable

Computer Connection:
To connect your computer to the projector:

HDMI Port: Connect one end of an HDMI cable to one of the projector’s HDMI ports and the other end to an HDMI port on your computer.
VGA Port: Connect one end of a VGA cable to one of the projector’s Computer ports and the other end to your computer’s monitor port. If you are using a laptop, switch it to external display (see Troubleshooting). You can also connect an audio cable.
USB Port: Connect the square end of a USB cable to the projector’s USB-B (square) port. Connect the flat end of the cable to any USB port on your computer.

Note: To use the projector’s Computer2 port, change the Monitor Out Port setting in the Signal I/O menu. See the online User’s Guide for details.

Screen Mirroring:
You can connect an external monitor and external speakers to your projector to enhance your presentations. See the online User’s Guide for details.

Wired Network:
You can connect the projector to your network using an Ethernet cable. See Wired network configuration for more information.

Video Devices:
You can connect multiple video devices and use the Source Search button on the projector or remote control to switch between them. For more information on playing sound through the projector, see the online User’s Guide.

RCA video cable (composite video)
HDMI cable
Component video to VGA cable
3.5 mm audio cable

Note: If you are connecting a streaming device, you can also connect it to the projector’s USB-A (flat) port for power.

Camera, USB Device, or Document Camera:
You can connect a digital camera, USB flash drive, USB storage device, or Epson DC-07 document camera to the projector’s USB-A (flat) port using a USB cable. If you connect a digital camera, USB flash drive, or USB storage device, you can use the projector’s PC Free feature. You can also connect other Epson document cameras to the projector. See the online User’s Guide for details.

Remote Control Usage:
The remote control can be used to perform various functions:

Install two AA batteries as shown.
Turn projector on and off.
Choose which source to display.
Access projector menus.
Turn off projector display and sound.
Navigate projector menus.
Control projector volume.
Access the Home screen.

For more information on using the remote control, see the online User’s Guide.

Product Usage Instructions:

Turn on your computer or video source.
Make sure the power cord is connected and plugged into an electrical outlet.
Open the projector’s lens cover.
Press the power button on the projector or remote control. The projector will beep, and the Status light will flash blue and then stay on.

Note: To shut down the projector, press the power button twice.

Quick Setup

IMPORTANT: Before using the projector, make sure you read these instructions and the safety instructions in the online User’s Guide.

Connect the projector

Computer
Choose from the following connections. See the sections below or the online User’s Guide for details.

EPSON-EX11000-3LCD-Full-HD-1080p-Wireless-Laser-
Projector-1

HDMI port
Connect one end of an HDMI cable to one of the projector’s HDMI ports and the other end to an HDMI port on your computer.

Computer port
Connect one end of a VGA cable to one of the projector’s Computer ports, and the other end to your computer’s monitor port. If you are using a laptop, switch it to external display (see “Troubleshooting”). You can also connect an audio cable.
Note: To use the projector’s Computer2 port, change the Monitor Out Port setting in the Signal I/O menu. See the online User’s Guide for details.

USB port
Connect the square end of a USB cable to the projector’s USB-B (square) port. Connect the flat end of the cable to any USB port on your computer.
Windows® 7 or later: After turning on the projector, follow the on-screen instructions to install the Epson® USB Display software (EMP_UDSE.EXE; only on first connection). If the software screen does not display automatically, open My Computer, Computer, or This PC, then double-click EPSON_PJ_UD.
OS X 10.8.x or higher: After turning on the projector, the setup folder for USB Display appears in the Finder. Double-click USB Display Installer and follow the on-screen instructions to install the Epson USB Display software (only on first connection). If the software screen does not display automatically, double-click EPSON_PJ_UD, then double-click USB Display Installer.

Screen mirroring
You can use Miracast® to send images to your projector from supported smartphones, tablets, and laptops. See the online User’s Guide for details.

External monitor and speakers
You can connect an external monitor and external speakers to your projector to enhance your presentations. See the online User’s Guide for details.

Wired network
Connect the projector to your network using an Ethernet cable. See “Wired network configuration” for more information. EPSON-EX11000-3LCD-Full-HD-
1080p-Wireless-Laser-Projector-3

Video device
Connect multiple video devices and use the Source Search button on the projector or remote control to switch between them. For more information on playing sound through the projector, see the online User’s Guide.

EPSON-EX11000-3LCD-Full-HD-1080p-Wireless-Laser-
Projector-4

Note: If you are connecting a streaming device, you can also connect it to the projector’s USB-A (flat) port for power.

Camera, USB device, or document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07 document camera to the projector’s USB-A (flat) port.

EPSON-EX11000-3LCD-Full-HD-1080p-Wireless-Laser-
Projector-5

If you connect a digital camera, USB flash drive, or USB storage device, you can use the projector’s PC Free feature. You can also connect other Epson document cameras to the projector. See the online User’s Guide for details.

Using the remote control

Install the two AA batteries as shown.

EPSON-EX11000-3LCD-Full-HD-1080p-Wireless-Laser-
Projector-6

For more information on using the remote control, see the online User’s Guide.

Turn on your equipment

Turn on your computer or video source.
Make sure the power cord is connected and plugged into an electrical outlet.
Open the projector’s lens cover.
Press the power button on the projector or remote control. The projector beeps, and the Status light flashes blue and then stays on.
Note: To shut down the projector, press the power button twice.
Follow the on-screen instructions to set up your projector. If you see a screen displaying 123, select the upright option and press remote control to continue.
Note: To change these settings, see the online User’s Guide. 6 If you don’t see an image, do one of the following:
Press the Source Search button on the remote control to select the image source.
Press the Home button on the remote control. Use the arrow buttons to highlight any of the options on the Home screen, then press to select it.
Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet.
The default language of the menu system is English. To select another language, press the Menu button on the remote control. Select Management and press . Select Language and press . Select your language and press . Press the Menu button to exit the menu system.

Adjust the image

To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position.
To reduce or enlarge the image, rotate the zoom ring on the projector.
To sharpen the image, turn the focus ring on the projector.
If your image looks like you may have placed the projector off to one side of the screen at an angle. Place the projector directly in front of the center of the screen, facing the screen squarely. If you can’t move the projector, use the horizontal keystone slider on the projector to correct the image shape.
Your projector automatically adjusts an image that looks like but if necessary you can press the button on the projector to correct it.

Wireless network configuration

Follow these steps to set up the projector for a wireless network connection.

Press the Menu button on the remote control.
Select the Management menu and press .
Select On as the Wireless LAN Power setting.
Select the Network menu and press .
Select Network Settings and press .
Select Wireless LAN as the Priority Control Interface setting.
Select one of the following as the Simple AP setting:
On for a direct connection to a computer, tablet, or smartphone.
Off to connect your projector to a router or access point.
Note: If you directly connect to the projector, you can only project locally stored content.
Select any other wireless settings as necessary. See the online User’s Guide for details.
When you are finished, return to the Network Settings menu and select Set to apply your settings.
Press the Menu button to exit the menu system

Wired network configuration

Follow these steps to set up your projector for a wired network connection.

Press the Menu button on the remote control, select the Network menu, then press .
Choose Network Settings and press .
Select Wired LAN as the Priority Control Interface setting.
Select the Wired LAN menu and press .
Choose IP Settings and press .
If your network assigns addresses automatically, make sure the DHCP setting is on. If not, make sure DHCP is off and enter the projector’s IP Address, Subnet Mask, and Gateway Address, as needed. Then press Esc.
To prevent the IP address from appearing on the network standby screen, set the IP Address Display setting to Off.
When you are finished, return to the Network Settings menu and select Set to apply your settings.
Press the Menu button to exit the menu system.

Install the optionalsoftware

Download the Epson iProjectionTM software and operation guide from your product’s support page (see “Where to get help”) and install the program on each computer that will project over the network.
To monitor and control your projector over the network, download and
install the Epson Projector Management software (Windows only) and operation guide from your product’s support page (see “Where to get help”).

Project over a network

If you need to configure the projector for a wired network, see “Wired network configuration.”

Press the LAN button on the remote control. You see a screen like this:
Start Epson iProjection on your computer.
Windows 11: Select > All Apps > EPSON Projector > Epson iProjection Ver.X.XX.
Windows 10: Select > EPSON Projector > Epson iProjection
Ver.X.XX.
Windows 8.x: Navigate to the Apps screen and select Epson iProjection Ver. X.XX.
Windows 7: Select or Start > Programs or All Programs > EPSON Projector > Epson iProjection > Epson iProjection Ver X.XX.
macOS: Double-click the Epson iProjection icon in the Applications folder.
Select Advanced Connection Mode and click OK.
Select the projector you want to connect to, then click Join.
If you don’t see the projector you want, click the Automatic search button to find the projector automatically, click the Manual search button to enter the projector’s IP address, or click the Profile button to find the projector based on a previously saved profile.
if you see a message asking for a keyword, enter the four digits that appear on the LAN standby screen and click OK.
Your computer image is projected, with a floating toolbar:
When you’re done presenting, click Leave on the toolbar.

Using the Epson iProjection app

You can project wirelessly from a mobile device (iOS, Android™, or Chromebook™) using the Epson iProjection app and a QR code.

Scan the following QR code to download and install the Epson iProjection app.
If you connected the projector to a network wirelessly, make sure to connect your mobile device to the same network.
Press the LAN button on the remote control to display a QR code on the projector screen.
Start Epson iProjection on your mobile device.
Use the QR code reader feature to read the QR code displayed.
Follow the app instructions to connect your device to the projector.
For more information on setting up and using this app, visit
http://epson.com/projectorapp (U.S.) or http://epson.ca/projectorapp (Canada).

Using web remote

You can use a standard web browser to control the projector through the network. A virtual remote control on your computer screen lets you perform many of the same functions as you can with the physical remote control.

Open your web browser and enter the IP address of the projector you want to monitor in the browser’s address bar. The Epson Web Control menu opens.
If you’re not sure what the IP address of the projector is, turn the projector on and select Wired LAN Info or Wireless LAN Info from the Network menu to display the IP address of the projector. (Do not enter the leading zeroes).
Select Basic Control or Remote. If you see a login screen, enter EPSONWEB as the user name and admin as the password.
Use the on-screen buttons to operate the projector, as you would using the remote control. See the online User’s Guide for details.

Troubleshooting

If you see a blank screen, check the following:
- Make sure your computer or video device is properly connected.
- Make sure the Status light on the projector is blue and not flashing.
- Press the power button or the A/V Mute button on the remote control to wake the projector from standby or sleep mode, if necessary.
- Make sure the lens cover is opened all the way.
If you see a blank screen when a computer is connected, check the following:
- On Windows, hold down the Windows key and press P at the same time, then click Duplicate.
- If you are using a Mac laptop with macOS 13, select System Settings > Displays. Press the + pop-up menu button, then choose a display to mirror.
  On macOS 12, select System Preferences > Displays > Display Settings. Select the projector, then choose the mirror option for your display from the drop- down menu.
  On macOS 11 and older, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.
If the projector does not respond to remote control commands, make sure the batteries in the remote control are installed correctly. Replace the batteries, if necessary.

Registration

Register today to get product updates and exclusive offers. You can register online at http://epson.com/webreg.

Where to get help

Manuals
For more information about using the projector, you can view or download the online manuals from the Epson website, as described below.

Internet support
Visit http://epson.com/support (U.S.) or http://epson.ca/support (Canada) and search for your product to download software and utilities, view manuals, get FAQs and troubleshooting advice, or contact Epson.

Telephone support
To use the Epson PrivateLine® Support service, call 800-637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling 562-276-4394 (U.S.) or 905-709-3839 (Canada).
Support hours are 7 a.m. to 4 p.m., Pacific Time, Monday through Friday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Optional accessories

For a list of optional accessories, see the online User’s Guide.
You can purchase screens or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at http://epsonstore.com (U.S. sales) or http://epsonstore.ca (Canadian sales).

EPSON is a registered trademark, Epson iProjection is a trademark, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.
PrivateLine is a registered trademark of Epson America, Inc.
Mac, macOS, and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. Android and Chromebook are trademarks of Google LLC.
Miracast® is a registered trademark of Wi-Fi Alliance®.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2022 Epson America, Inc., 11/22 Printed in XXXXXX