Panasonic DMC-FT30EG Digital Camera User Manual

Panasonic DMC-FT30EG Digital Camera

Product Information

• Product: Digital Camera
• Model No.: DMC-FT30EG DMC-FT30EP DMC-FT30EF DMC-FT30EB
• DMC-FT30EE DMC-FT30GC DMC-FT30GA DMC-FT30GN DMC-TS30P DMC-TS30PC
• DMC-TS30PU DMC-TS30GK
• Colour (K): Black Type (Except PC/GK), Blue Type (A), Red Type (R), Orange Type (Except GK)

Please use this manual together with the service manual for Model No.DMC- FT25EB/EE/EF/EG/EP/GA/GC/GF/GN, DMC-TS25P/PC/PU/GK, Order No.DSC1302002CE

WARNING This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products dealt with in this service information by anyone else could result in serious injury or death.

Introduction

• The purpose of issuing this Service Manual is that to introduce the following newly added models. DMC-FT30EG/EP/EF/EB/EE/GC/GA/GN, DMC-TS30P/PC/PU/GK
• This Service Manual contains technical information which will help service personnel to understand and service the Digital Camera; DMC-FT30EG/EP/EF/EB/EE/GC/GA/GN, DMC-TS30P/PC/PU/GK.
• Since this Service Manual does not cover the same part which is already described in the Original Service Manual for DMC-FT30,TS30 series, when servicing, refer to the descriptions in the Service Manual for DMC-FT25EB/EE/EF/EG/EP/GA/GC/GF/GN,TS25P/PC/PU/GK, Order No.DSC1302002CE.

Service Navigation

How to Define the Model Suffix (NTSC or PAL model)

To define the model suffix to be serviced, refer to the nameplate which is putted on the bottom side of the Unit. There are seven kinds of DMC-FT30/TS30, regardless of the colours.

• a) DMC-TS30P/PC
• b) DMC-FT30EB/EF/EG/EP
• c) DMC-FT30EE
• d) DMC-FT30GN
• e) DMC-TS30GK
• f) DMC-FT30GC/GA,DMC-TS30PU

What is the difference is that the “INITIAL SETTINGS” data which is stored in Flash ROM mounted on Main P.C.B.

Defining methods
To define the model suffix to be serviced, refer to the nameplate which is putted on the bottom side of the Unit.

• a) DMC-TS30P/PC
  The nameplate for these models show the following Safety registration mark.

• b) DMC-FT30EB/EF/EG/EP
  The nameplate for these models show the following
  Safety registration mark.

• c) DMC-FT30EE
  The nameplate for this model show the following
  Safety registration mark.

• d) DMC-FT30GN
  The nameplate for this model show the following
  Safety registration mark.

• e) DMC-TS30GK
  The nameplate for this model show the following Safety registration mark.

• f) DMC-FT30GC/GA, DMC-TS30PU
  The nameplate for these models do not show any above safety registration mark.

Note: After replacing the Main P.C.B., be sure to achieve adjustment. The Maintenance software (DIAS) is available at software download on the Support Information from NWBG/VDBG-AVC web-site in TSN system.

INITIAL SETTINGS

After replacing the Main P.C.B., be sure to perform the initial settings after achieving the adjustment by following the procedure below according to the model suffix of the unit.

IMPORTANT NOTICE : Before proceeding Initial settings, be sureto read the following CAUTIONS.

• CAUTION 1:(INITIAL SETTINGS)
  • FTER REPLACING THE MAIN P.C.B. -..
  • *. The model suffix can be chosen JUST ONE TIME. (Model suffix : DMC-FT30; “EE/GC/GA/GN”,DMC-TS30;”P/PC/PU/GK”)
  • *. Once one of the model suffix has been chosen, the model suffix lists will not be displayed, thus, it can not be changed.
  • [Note:Only for “EG, EF, EB and EP” models]
  • • When one of the “EG, EF, EB and EP” has been chosen, only “EG, EF, EB and EP” are displayed from second times.
• CAUTION 2:(Stored picture image data in the unit)
  • This unit employs “Built-in Memory” for picture image data recording. (Approx. 220MB) After proceeding “INITIAL SETTINGS”, the picture image data stored in the unit is erased.

PROCEDURES

Precautions: Read the above “CAUTION 1” and “CAUTION 2”, carefully

Preparation:

1. Attach the Battery to the unit.
2. Set to NORMAL PICTURE mode by operating the mode button.

Note: If the picture mode is other than NORMAL PICTURE mode, it does not display the initial settings menu.

• Step 1. The temporary cancellation of “INITIAL SETTINGS”:
  While keep pressing “UP of Cursor button” and MOTION PICTURE button simultaneously, turn the Power on.

• Step 2. The cancellation of “INITIAL SETTINGS”:

  • Press the PLAYBACK button.
  • Press “UP of Cursor button” and MOTION PICTURE button simultaneously, then turn the Power off.

• Step 3. Turn the Power on: Turn the Power on.

• Step 4. Display the “INITIAL SETTINGS” menu:

  • While keep pressing MENU/SET and “RIGHT of Cursor button” simultaneously, turn the Power off.
  • The “INITIAL SETTINGS” menu is displayed.
  • There are two kinds of “INITIAL SETTINGS” menu form as follows:
  • [CASE 1. After replacing Main P.C.B.] When Main P.C.B. has just been replaced, the following model suffix list is displayed as follows. (Six pages in total)
  • [CASE 2. Other than “After replacing Main P.C.B.”]

• Step 5. Choose the model suffix in “INITIAL SETTINGS” : (Refer to “CAUTION 1”)[Caution: After replacing Main P.C.B.]

  • (Especially, other than “EG, EF, EB and EP” models)
  • The model suffix can be chosen, JUST ONE TIME.
  • Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can be changed. Therefore, select the area carefully.
  • Select the area with pressing “UP / DOWN of Cursor buttons”.

• Step 6. Set the model suffix at “INITIAL SETTINGS”:
  Press the “RIGHT of Cursor buttons”.
  The only set area is displayed. Press the “RIGHT of Cursor buttons” after confirmation.(The unit is powered off automatically.)

• Step 7. CONFIRMATION:
  Confirm the display of “PLEASE SET THE CLOCK” in concerned language when the unit is turned on again. When the unit is connected to PC with USB cable, it is detected as removable media.

1. As for your reference, major default setting condition is as shown in the following table.
   Default setting (After “INITIAL SETTINGS”)

Replacement Parts List

Note:

1. • Be sure to make your orders of replacement parts according to this list.
2. IMPORTANT SAFETY NOTICE Components identified with the mark I have the special characteristics for safety. When replacing any of these components, use only the same type.
3. Unless otherwise specified, All resistors are in OHMS. K=1.000 OHMS. All capacitors are in MICRO-FARADS (uf). P=uuF.
4. The marking (RT) indicates the retention time is limited for this item. After the discontinuation of this assembly in production, it will no longer be available.
5. Supply of CD-ROM, in accordance with license protection, is allowable as replacement parts only for customers who accidentally damaged or lost their own.

E.S.D. standards for Electrostatically Sensitive Devices, refer to PREVENTION OF ELECTROSTATIC DISCHARGE (ESD) TO ELECTROSTATICALLY SENSITIVE (ES) DEVICES section.

Definition of Parts supplier:

1. Parts marked with [ENERGY] in the remarks column are supplied from Panasonic Corporation Energy Company.
2. Parts marked with [SPC] in the remarks column are supplied from AVC-CSC-SPC. Others are supplied from PAVCX.

Electrical Component

COMPARISON CHART:

The following tables show the difference between DMC-FT25/TS25 series and DMC- FT30/TS30 series.

Frame and Casing Section

COMPARISON CHART:

The following tables show the difference between DMC-FT25/TS25 series and DMC- FT30/TS30 series.

Safety| Ref No.| Original Part No.

DMC-FT25/TS25 series

| New Part No.

DMC-FT30/TS30 series

| Part Name & Descriptions| Pcs| Remarks
---|---|---|---|---|---|---
| 4| VEP56146B| VEP56146D| MAIN P.C.B.| 1| (RTL) E.S.D.
| 6| L0AA01A00125| L0AA01A00175| SPEAKER| 1|
| 39| VYK6E06| VYK6U49| FRONT ALMI CASE UNIT| 1| (-K)
| 39| VYK6E12| VYK6U50| FRONT ALMI CASE UNIT| 1| (-R)
| 39| VYK6E10| VYK6U47| FRONT ALMI CASE UNIT| 1| (-A)
| 39| —–| VYK6U48| FRONT ALMI CASE UNIT| 1| (-D)
| 40| VKM0D26| VKM0K12| REAR ALMI CASE| 1| (-A)
| 40| —–| VKM0J90| REAR ALMI CASE| 1| (-D)
| 41| VKM0D28| VKM0K13| TOP CASE| 1| EG-K/A/R,EP-K/A/R,EF-K/A/R,EB-

K/A/R,EE-K/R,GC-K/A/R,GA-K/A/ R,GN-K/A/R

| 41| VKM0D29| VKM0K13| TOP CASE| 1| P-K/A/R,PC-A/R,PU-K/A/R,GK-A/R
| 41| —–| VKM0K13| TOP CASE| 1| (-D),EE-A

Packing and Accessories Section

“Notes”
| 106| SFM0079| CD-R(SOFTWARE/INSTRUCTION BOOK)| 1| EE,GC,GA,GN See “Notes”
| 106| SFM0080| CD-R(SOFTWARE/INSTRUCTION BOOK)| 1| GK See “Notes”
| 109| VPF1539| POLYETHYLENE BAG| 1| EG,EP
| 109| VPF1547| POLYETHYLENE BAG| 1| EF,EB,EE,GC,GA,GN,GK
| 111| SQT0721| BASIC O/I (GERMAN/TURKISH)| 1| EG
| 111| SQT0724| BASIC O/I (ITALIAN)| 1| EG
| 111| SQT0723| BASIC O/I (SPANISH/PORTUGUESE)| 1| EG
| 111| SQT0722| BASIC O/I (FRENCH/DUTCH)| 1| EG,EF
| 111| SQT0725| BASIC O/I (SWEDISH/DANISH)| 1| EP
| 111| SQT0726| BASIC O/I (POLISH/CZECH)| 1| EP
| 111| SQT0727| BASIC O/I (HUNGARIAN/FINNISH)| 1| EP
| 111| SQT0728| BASIC O/I (ENGLISH)| 1| EB
| 111| SQT0729| BASIC O/I (RUSSIAN/UKRAINIAN)| 1| EE
| 111| SQT0730| BASIC O/I (ENGLISH/CHINESE(TRADITIONAL))| 1| GC,GA
| 111| SQT0731| BASIC O/I (ARABIC)| 1| GC,GA
| 111| SQT0732| BASIC O/I (VIETNAMESE)| 1| GA
| 111| SQT0734| BASIC O/I (ENGLISH)| 1| GN
| 111| SQT0733| BASIC O/I (CHINESE(SIMPLIFIED))| 1| GK
| 113| SPK0051| PACKING CASE| 1| EG,EP,EF,EB,EE,GC,GA,GN
| 113| SPK0052| PACKING CASE| 1| GK
| 114| VQL2X49| COLOR LABEL| 1| EG-K,EP-K,EF-K,EB-K,EE-K,GC-K,GA-K,GN-K
| 114| VQL3B09| COLOR LABEL| 1| EG-R,EP-R,EF-R,EB-R,EE-R,GC-R,GA-R,GN-R
| 114| VQL2Z72| COLOR LABEL| 1| EG-D,EP-D,EF-D,EB-D,EE-D,GC-D,GA-D,GN-D
| 114| VQL3B10| COLOR LABEL| 1| GK-R
| 115| K2CQ2YY00082| AC CORD| 1| EG,EP,EF,EE,GA
| 115| K2CT3YY00034| AC CORD| 1| EB,GC
| 115| K2CJ2YY00052| AC CORD| 1| GN
| 115| K2CA2YY00130| AC CORD| 1| GK
| 119| VMG2068| SILICON JACKET| 1| GN
| 200| VPF1458| CAMERA BAG| 1| P,PC,PU
| 201| —–| BATTERY PACK| 1| P,PC,PU
| 202| DE-A91BA/SXP| BATTERY CHARGER| 1| P,PC,PU
| 203| K1HY08YY0031| USB CABLE| 1| P,PC,PU
| 205| VFC4297| HAND STRAP| 1| P,PC,PU
| 206| SFM0075| CD-R(SOFTWARE/INSTRUCTION BOOK)| 1| P,PC,PU See “Notes”
| 207| VQL2Y50-AM| OPERATING LABEL (CANADIAN-FRENCH)| 1| PC
| 209| VPF1547| POLYETHYLENE BAG| 1| P,PC,PU
| 211| SQT0718| BASIC O/I (ENGLISH/SPANISH)| 1| P
| 211| SQT0719| BASIC O/I (ENGLISH/CANADIAN FRENCH)| 1| PC
| 211| SQT0720| BASIC O/I (SPANISH)| 1| PU
| 213| SPK0049| PACKING CASE| 1| P,PC
| 213| SPK0050| PACKING CASE| 1| PU
| 214| VQL2X49| COLOR LABEL| 1| P-K PU-K
| 214| VQL3B09| COLOR LABEL| 1| P-R,PC-R,PU-R
| 214| VQL2Z72| COLOR LABEL| 1| P-D,PC-D,PU-D

Exploded view

< Except for P / PC / PU >

Directions for putting Color Label.

• Except blue color model, stick each color label (Ref. No. 114) inside the “color indication frame” making sure that the bottom part of the color label is even inside the color indication frame

< Only P / PC / PU > Directions for putting Color Label.

*Except blue color model, stick each color label (Ref. No. 214) inside the “color indication frame” making sure that the bottom part of the color label is even inside the color indication frame.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>