veho VHS-010-OC Cave Outdoor Wireless IP Camera Instruction Manual

June 13, 2024
veho

veho VHS-010-OC Cave Outdoor Wireless IP Camera

Product Information

The Cave HD Outdoor IP Camera (model VHS-010-OC) is a wireless camera designed for outdoor use. It allows users to monitor their surroundings remotely through the Cave app. The camera supports live view, recording, and playback functionalities. It is equipped with a QR Code for easy pairing with the app, and it can be connected to a Wi-Fi network for convenient access.

The camera requires a compatible power source and comes with a supplied power cable. It is recommended to use the provided power cable to ensure warranty validity. The camera also supports a microSD card (up to 128GB, not included) for recording and storing
footage. The installation process should be carried out by a qualified electrician to ensure proper mounting and support.

Product Usage Instructions

Installing the Cave Camera

  1. Before installation, insert a compatible microSD card (class 10, up to 128GB) into the camera’s slot. Remove the two screws securing the bottom panel, insert the microSD card, and secure the bottom panel back in place.
  2. Ensure that the mounting surface can support the weight of the camera.

Pairing the Cave Camera

  1. Once the camera is installed and connected to a power source, the LED on the front will continuously flash green, indicating it is in pairing mode.
  2. Open the Cave app on your mobile device and press the “Add Accessory” button, followed by “By scanning QR Code”.
  3. Scan the QR Code on the base of the camera using the scan window in the app. Take note of the camera pairing name displayed on screen.
  4. Open the Wi-Fi settings on your device. If the camera does not appear on the Wi-Fi list, press and hold the reset button on the rear of the camera for 10 seconds. Release the button, and you should hear a beep. The camera should appear within 30 seconds.
  5. Select the camera from the Wi-Fi list and enter the default password “01234567”. Click “Join” to connect the camera to your Wi-Fi network.
  6. In the Cave app, re-enter your Wi-Fi router name and password, then click “Start”. The network configuration may take a few minutes.
  7. Enter a name for your new IP camera and click the tick icon to save. The camera will now appear in the Cave app under “Smart cameras”.
  8. To view the camera for the first time, reset the default password by pressing “OK” and entering a new password. Once confirmed, the camera will be online and ready to view.

Live View, Recording & Playback

To access live view of any camera listed in the Cave app:

  1. Click on the “Smart Camera” icon on the home screen.
  2. Click the play icon on the left side of the camera’s thumbnail to enter live view mode.

In live view mode, you can take snapshots, listen to audio, and use two-way communication through the camera. To review recorded footage:

  1. Click the “Video” link to access a list of recorded events.

All recorded footage is automatically saved onto a microSD card (not included).

Introduction to the

Cave HD Outdoor IP Camera

Before pairing the Cave camera with your Cave Smart Hub please read the following.
Ensure the camera and Smart Hub is within range of the mobile device which you use to access the Cave app.
You will need your router username and password to hand.
IMPORTANT: Only use the supplied power cable with the camera and a compatible power source. Failure to do so may invalidate your warranty.

Visit our YouTube channel for Cave installation guides https://www.youtube.com/VehoWorld

Installating the Cave camera

Before installation insert a compatible microSD card, class 10 up to 128GB (not included). Remove the two screws that secure the bottom panel and insert microSD card into the slot. Secure the bottom panel in place with the two screws.

veho VHS-010-OC Cave Outdoor Wireless IP Camera-fig1

We recommend the installation is carried out by a qualified Electrician. Before mounting the camera ensure the mounting surface can easily support the weight of the camera.

veho VHS-010-OC Cave Outdoor Wireless IP Camera-fig2

Pairing the Cave camera

STEP 1
Once installed and plugged into a compatible power source, the Cave camera LED (on the front) will continuously flash green to indicate it is in pairing mode.

veho VHS-010-OC Cave Outdoor Wireless IP Camera-fig3

STEP 2
Open the Cave app and press the ‘Add Accessory’ button then press ‘By scanning QR Code’.

STEP 3
Scan the QR Code on the base of the camera using the scan window in the app. Take note of the camera pairing name, shown on screen, next open wi-fi settings on your device.

veho VHS-010-OC Cave Outdoor Wireless IP Camera-fig5

Note: If the camera does not appear on the wi-fi list press and hold the reset button on the rear of the camera for 10 seconds, when released, you will hear a ‘Beep’. The camera should appear within 30 seconds.

veho VHS-010-OC Cave Outdoor Wireless IP Camera-fig6

STEP 4

Select the camera from the wi-fi list and enter the default password ‘01234567’ and click ‘Join’. The camera should connect to your wi-fi.

STEP 5
Re-enter the Cave app your wi-fi router should be already listed, enter your wi-fi router password and confirm the password before clicking ‘Start’. Network configuration may take up to a few minutes.

STEP 6
Enter a name for your new IP camera and click the tick icon to save. The camera will now appear in the Cave app under ‘Smart cameras’.

STEP 7
To view the camera for the first time, you will need to reset the default password. Press ‘OK’ and enter a new password, once confirmed the camera will be online and ready to view.

Live view, recording & playback

Click on the ‘Smart Camera’ icon on the home screen where all IP cameras are listed. For a live view of any camera’s click the play icon on the left. In live view mode, you can take a snapshot, listen to audio and talk through the camera. To review recorded footage click the ‘Video’

veho VHS-010-OC Cave Outdoor Wireless IP Camera-fig11

Camera settings

Change camera password / Motion detection & recording / Sync timezone / Record in HD or SD / Horizontal and vertical flip / Update wi-fi settings / Format SD card.

Specifications

  • Camera
    • Image sensor 1/2.7” 1080P CMOS
    • Effective pixels 1920(H) x 1080(V)
    • WDR Digital WDR
    • Noise Reduction 3D DNR
    • Day/Night control (IR-Cut) Auto (ICR)/Colour/B&W
    • Motion detection Supported
    • SD card Supported, up to 128GB
    • IR distance 30m (98.5ft)
  • Lens
    • Focal length 4mm
    • Max aperture F2.4
    • Focus control Fixed
    • Angle of view 114°
  • Video
    • Encode H.265 main profile
    • Resolution 1080P (1920×1080), VGA (640×352)
    • Video bitrates 32Kbps ~ 8Mbps
    • Video frame rate 30fps@1080P
    • Image snapshot Supported
  • General
    • Power supply DC 12V/1A
    • Hard reset Supported
    • Working power <5W
    • Working temp -10℃~+55 / 10%~90% RH
    • Water resistant IP65
    • Dimensions 188mm x 65mm x 60 mm
    • Weight 385g
  • Network
    • Network protocol HTTP, FTP, TCP/IP, UDP, SMTP, DHCP, NTP, UPNP, RTSP, Onvif, DDNS
    • App iOS (9.0+), Android (5.0+)
    • Wi-Fi Wi-Fi (802.11b/g/n), 2.4G only, supports WEP / WPA-PSK /WPA2-PSK encryption
    • P2P Supported

Support & troubleshooting

How do you reset the Cave HD Outdoor wireless IP Camera?
Press and hold the reset button on the rear of the camera until you hear the reset success tone, approximately 10 seconds. Release the button and wait until you hear a beep to confirm the camera is in pairing mode, this can take up to 30 seconds; proceed to set up the camera after the beep.

Contacting Veho
To contact Veho for support or troubleshooting for your Cave IP Camera visit our website at veho-world.com and use our pop-up chatbox.

DISCLAIMER:
Veho is not responsible for ensuring all footage is captured. Please ensure the Cave HD Outdoor Wireless IP Camera is installed and positioned correctly, and you are familiar with operating the camera and app before using.

EC DECLARATION OF CONFORMITY
Hereby, Veho UK LTD declares that the radio equipment type (VHS-010-OC) is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity
is available at https://veho-world.com/compliance/
Frequency band(s) – 2.4GHz
Maximum radio-frequency power – 19dBm

This symbol, affixed to the product or its packaging, indicates that the product must not be processed as household waste. This product should be correctly disposed of according to your local guidelines for electrical and battery operated products. Correct disposal of the battery will avoid potential harm to the environment and human health. For further information regarding the recycling of this product, please contact your local waste recycling centre.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals