MUUVO Quick SE 2 Stroller User Manual

MUUVO Quick SE 2 Stroller

IMPORTANT!

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

HELLO!
Your new MUUVO stroller is standing right in front of you! We’re sure both you and your child will experience countless wonderful moments while using it. We know that nobody likes reading manuals, but this one is definitely worth it- it will show you all the features and possibilities that comes with your new MUUVO and how easy it is to get them up and running.. Thank you!

MUUVO TEAM
ATTENTION! PLEASANT INFO!
All available configurations can be installed by yourself.

YOUR MUUVO STROLLER CONTAINS:

1. frame
2. wheels
3. seat
4. canopy to stroller
5. bumper
6. mosquito net
7. raincover
8. footcover
9. two-sides cushion
10. mama bag

YOUR MUUVO CARRYCOT CONTAINS:

1. carrycot
2. adapters for the carrycot
3. matress to carrycot
4. mosquito net
5. sun protector

SUPPLIED LOOSE IN BOX FOR 2 IN 1 SET

1. frame x1
2. wheels ×4
3. seat x1
4. carrycot ×1
5. adapters for the carrycot × 2
6. canopy x1
7. bumper x1
8. carrycot matress x1
9. raincover x1
10. mosquito net for carrycot x1
11. mosquito net for stroller ×1
12. footcover x1
13. two-sides cushion x1
14. bag x1
15. sun protector ×1
    If any accessories listed above are missing from this stroller or If you have any difficulties in assembling the stroller, please contact our Service Department: [email protected].

IMPORTANT!
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE STROLLER WARNINGS

Follow the manufacturer’s instructions.
This stroller is designed for 1 child from 0 months up to a weight of 22 kg/4 year, Whichever comes first.

Maximum load of basket is 3kg.

WARNING:

• Never leave the child unattended.
• Always use seat belts and fasten them in the correct way.
• Before use, make sure that all components are securely mounted.
• This product is not suitable for running or skating.
• To avoid injury ensure that the child is kept away when unfolding and folding this product.
• The emergency brake should be activated when placing and removing the child.
• Do not let the child play with this product.
• Before use, check that the seat is properly adjusted and locked.
• Pushchair designed to be used from birth shall ecommend the use of the most reclined position for new born babies.
• Do not apply any weight to the handle or back of the seat not recommended by the manufacturer.
• Only replacement parts supplied or recommended by the manufacturer/distributor shall be used.
• Use the emergency brake whenever you park your stroller
• Do not use this product if any part is missing or if any part is damaged.

CARRYCOT WARNINGS

WARNING:

• The product is only suitable for one (1) child.
• The product shall not be used as soon as the child is able to sit by himself, roll over and can push itself up on its hands and knees.
• Maximum weight of the child: 9kg.
• Do not add additional mattress.
• This product is compatible with the chassis of the stroller.
• Only use on a hard, horizontal level and dry surface.
• Do not let other children play unattended near the carrycot.
• Do not use if any part of the carrycot is broken, torn or missing.
• Never leave your child unattended.
• Only use original replacement parts. It may be unsafe to use substitutes.
• Be aware of the risks presented by an open fire and other heat sources such as electrical heaters, gas flames etc. especially if they are in the immediate vicinity of the carrycot.
• Only use the mattress supplied with the carrycot.
• Please check on a regular basis the carrying handle and the base including all legs for wear and damage of any kind.
• Never use the carrycot on a stand.
• Ensure that the child’s head is never at a lower level than it’s body when placed inside the carrycot.
• Handles for carrying should be placed outide the carrycot when using it.
• Never lift or move the product with child inside it.

USER MANUAL

1. STROLLER UNFOLDING

   • After unboxing, the stroller’s frame should be folded as shown at the picture 1. If you pull the handle up and hear the click sound that means the stroller is unfolded and now you can proceed to wheels installation.
     WARNING: Make sure all movable parts are locked properly before use.
     To avoid any injuries, make sure your child is not anywhere near the assembly area.

2. ASSEMBLE/DISASSEMBLE WHEELS:
   You don’t need any screwdrivers, keys nor other tools.

   • A. To install a wheel you need to grab the stroller and mount the axel in the appropriate hole until you hear the click sound. Repeat the action with 3 other wheels.

   • B. To remove the front wheel, find the metal clip as in photo 2B.
     Press it and pull the wheel towards you. Follow the same procedure for the other wheel.

   • C. To remove the rear wheel, find the metal clip as in photo 2C
     Pull it down and pull the wheel towards you. Proceed identically for the other wheel.

3. 360 FRONT WHEELS ROTATION
   Press the plastic button on the front wheels to set the wheels for driving forward only.
   Lift the plastic button to release the lock – now the wheels rotate 360 degrees, as shown in the picture

4. STOPPING THE STROLLER

   • A. Press the brake pedal to lock the stroller.
   • B. Raise the brake pedal to release the brake.
     WARNING: Always lock the brake while putting your baby in the pram.

5. INSTALLATION OF THE SEAT

   • A. Mount the seat as in picture 5A (facing each other).
     When you hear a click sound from both sides, you will know that the seat is well and securely mounted.

   • B. Press the buttons on both sides and lift the seat to install it backwards. Put the seat in position to complete the installation.
     WARNING: The seat can only be mounted directly on the frame.
     Mounting on adapters may cause instability of the seat or its detachment from the frame.
     WARNING: The seat is not suitable for children under 6 months

6. BUMPER ADJUSTMENT

   • A. Mount the bumper on both sides of the seat, as in picture 6A. Make sure the handle is locked – you will hear a click!
   • B. Unlock and pull out one side of the bumper to rotate the bumper 360 degree.

7. ASSEMBLY AND ADJUSTMENT OF THE CANOPY

   • A. Insert the canopy into the seat. When you hear a “click,” the booth is seated.
   • B. The canopy can be unfolded by pulling it towards you as shown in photo 7B.
   • C. The canopy can be enlarged by pulling back the slider of one of the sections as in photo 7C.
   • D. The other section hides the ventilation underneath, topped with a net as in photo 7D.
   • E. You can also adjust the height of the canopy – the canopy grows with your child.
   • F. To adjust the height of the canopy, press the button on the back of the backrest (Figure 7F) and set the desired height.

8. HANDLE ADJUSTMENT
   Press the button on the handle – see picture 8. Raise the handle to the most comfortable height.
   To lock the handle on the height you want, release the button.

9. FOOTREST ADJUSTMENT
   Press the buttons indicated by the arrow on both sides at the same time to adjust the footrest position.

10. BACKREST ADJUSTMENT
    A-10B. Lift up the button (arrow in the picture 10A) to adjust the backrest in 3 positions (sleeping or seating) as picture 10B.

11. SEAT BELTS

    • A. The belts are infinitely adjustable, you can adjust their height by pulling up or down the stoppers shown in photo 11 A.
    • B. The buckle is magnetic. To undo the safety buckle press the buttons on both sides and pull it toward you – Figure 11B.
    • C. Then remove the right side of the buckle, which overlaps the left side of the buckle.
    • D. To fasten the buckle bring the left and right parts of the buckle closer together, thanks to the magnets the parts will connect. Then bring the front side of the buckle closer to close it.

12. I USER MANUAL
    STROLLER FOLDING

    • A. Lower the canopy and handle to the lowest position.
      For forward-facing installation, raise the footrest and seat toward the handle and backrest.
      Fold the canopy. Fold the handle located on the frame under the seat (photo

12. and press with your thumb the lock button. Now lift the stroller gently to fold it.

    • B. Lower the canopy and the handle to the lowest position.
      For rear-facing installation, fold the canopy, lift the backrest adjustment button, and turn it to the handle.
      Press the button and turn the whole thing together with the handle
      WARNING: Always fold the seat towards the handle!
      WARNING: When folding the stroller, the handle and canopy must always be folded to the lowest position.

13. CARRYCOT ASSEMBLY

  *  **A.** If the carrycot is not unfolded, remove the bedding and mattress, pull out the metal hoops on the bottom of the carrycot according to the directions of the arrows, as in Figure 13A until they lock into place.  

Then fasten in the stroller the bedding and mattress.

  *  **B**. When the padding is properly fastened, use the zipper end masking piece (photo 13B).
  *  **C.** Place the masking element in the pocket provided for it (photo 13C)
  *  **D.** The carrycot can be mounted directly on the frame of the stroller.
  *  **E**. If you want to mount the carrycot higher, mount the adapters on the stroller frame (picture 13E).
  *  **F.** Then mount the carrycot. When you hear a clicking sound from both sides, you will know that the carrycot is well and securely mounted
  *  **G.** The canopy has a 2-stage adjustment. Depending on your needs, simultaneously press the buttons located on both sides of the stroller and adjust to the desired height.  

WARNING: Lock the safety brake before mounting the carrycot on the stroller.
The carrycot can only be installed in one position – facing backward.
WARNING: The carrycot is designed for children up to 6 months, weighting up to 9 kg, who cannot sit, crawl nor rotate alone. Stop using it when your baby starts crawling. Do not use mattresses thicker than 15 mm.

14. REMOVAL OF THE CARRYCOT
    The adapters are equipped with memory buttons. Press the buttons on the two sides and pull the carrycot up, as shown in photo 14. Then remove the adapters from the stroller frame.
    WARNING: Lock the safety brake before disassembling the carrycot on the stroller.

15. CARRYCOT VENTILATION
    Carrycot has 3D AIRFLOW ventilation on the front and back of the carrycot.
    The ventilation openings are topped with a net and the ventilation panels are attached with zippers and magnets.

16. CARRYCOT MOSQUITO NET
    Mosquito net is placed in the carrycots canopy.

17. INSTALLATION OF THE SUN PROTECTOR

  *  **A.** Detach the roof from the carrycot canopy.
  *  **B.** Fasten the sun protector in place of the previously detached roof. The attachment of the sun protector is compatible with the zipper that attaches the roof to the carrycots canopy.

18. BAG ATTACHMENT

  *  **A.** Special straps are dedicated to the bag, which allow to adjust the height of attachment of the bag on the frame. To mount the bag on the frame, attach the adjusting straps to the hooks located on the handle of the stroller, as shown in photo 18A.
  *  **B.** The bag can also be attached directly to the frame without using the adjusting straps.

19. CAR SET INSTALL

  *  **A.** Install the car seat adapter. Adapters work with most car seats. Mount them on the frame.  

When you hear a ‘click’, you will know that the adapters are correctly mounted.

  *  **B.** Align the car seat hole with the car seat adapter, then push the car seat slightly down till you hear a ‘click’.  

That means the car seat is mounted correctly. Be careful – make sure the adapters and car seat are correctly installed.

  *  **C.** The car seat can only be installed in one position – facing backward.
  * D. The frame and adapters are compatible with the KIDDY, MAXI COSI and CYBEX models.

20. REMOVING A CAR SEAT
    Remove adapters from the frame, press the buttons on the adapters as in picture 20 and lift the seat up.
    To remove the seat from the adapters, follow the instructions supplied with the car seat.

WARNING: Check if the safety brake is activated before you start to assemble or disass emble other parts of the stroller.

CLEANING

• Do not use abrasives to clean the frame! Use a damp cloth and a mild detergent and dry thoroughly.
• Should the pushchair be exposed to salt water, please rinse it down with fresh (tap) water as soon as possible afterwards.
• Please always check the fabric care label before washing, do not tumble dry, do not iron or dry clean. Do not expose to direct sunlight when drying.
• We recommend to use a rain cover in wet weather.
• If the stroller is wet, leave it unfolded and allow all parts to dry completely to prevent mold. Never store in a damp environment.

MY AREA
100% Polyester

MAINTENANCE

• The user is responsible for the regular maintenance of the stroller.
• All connecting parts must be tight and secured properly. It is particularly important to ensure that the locking and swiveling mechanisms are treated regularly with dry lubricant. It is important that brakes, wheels and tires are not impaired during use.
• Inspect them regularly and repair or replace if necessary.
• You can also treat the other moving parts with dry lubricant. After spraying on the dry lubricant, wipe the product with a soft cloth.
• The frame tubes covered by the locking mechanism and turning mechanism should also be regularly cleaned and sprayed. This will ensure that you enjoy your pushcha- ir without any problems.
• Do not make any modifications to the product. If you have any complaints or problems, please contact your supplier or importer.
• A service should be scheduled every 24 months.

SAFETY STANDARDS:
EN 1888-1: 2018+A1: 2022
EN 1888-2:2018+A1: 2022

Muuvo Sp. J.
ul. Rychla 18
41-948 Piekary Śląskie
POLSKA

www.muuvo.com

Obsługa klienta:
+48 507 98 38 28
[email protected]

Serwis/reklamacje:
+48 507 98 38 29
[email protected]

References

• Polish manufacturer of baby strollers - Muuvo

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>