FS S5800-48F4S Multi Port Gigabit Ethernet Switch User Guide
- June 12, 2024
- FS
Table of Contents
- Configuration Considerations
- Introduction
- Upgrade the Software System Versions
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
- Connect the PC and the switch to the network cable and the console port as
- After the connection is completed, there we recommend the super terminal,
- Energizing the switch, then open the installed login software, select the
- After completing the above steps, hitting the Enter key of the keyboard will
- Install and open the software Tftp32 on PC, specify the current directory as
- CLI interface software upgrade means the user selects the file to be upgraded
- After the restart is complete, check the current device system running
S5800-48F4S Switch FSOS
Software Upgrade Guide
Model: S5800-48F4S
Configuration Considerations
The upgrade guide suits for the model of switch as shown in table 1:
| Series | Product Model |
|---|---|
| S5800 Series | S5800-48F4S |
Table 1
Introduction
When new features are added or the original performance needs to be optimized and the currently running version is out of date, the device needs to be upgraded. In this case, you need to load a high version of the system software, upgrade through the CLI interface, WEB interface, and restart.
Upgrade the Software System Versions
3.1 Upgrade by CLI Interface
3.1.1 Network Topology 3.1.2 Configuration Steps
-
Connection Equipment
Connect the PC and the switch to the network cable and the console port as
shown in topology. Connect one end of the RJ-45 network cable to the network card interface of the PC and the other end to the network port of the Switch-1. Connect one end of the console cable VGA to the VGA port of the PC. One end of the RJ-45 is connected to the console port on the front panel of the switch.
-
Download Configuration Software
After the connection is completed, there we recommend the super terminal,
putty or Secure CRT tool to configure the switch.
-
Switch on and Use Login Software
Energizing the switch, then open the installed login software, select the
mode of serial port of login, Port through the device manager to determine. Baud rate: 115200, Data bits: 8, Parity: None, Stop bits: 1. (Reference below)
NOTE: COM Number
can be viewed through device manager. [(right click on “my computer” >
“manage” > “device manager” > “port (COM and LPT)”]. If it displays an
unrecognized USB device, please download and install the corresponding driver. -
Login Switch
After completing the above steps, hitting the Enter key of the keyboard will
prompt you to enter the account password. At this time, enter the default username and password: admin/admin to log in to the s witch.
-
Select the file to be uploaded on Tftp32 software
Install and open the software Tftp32 on PC, specify the current directory as
the directory corresponding to the file to be uploaded, and select the current IP address of PC1 on the server interface.
-
Download version file and upgrade version
CLI interface software upgrade means the user selects the file to be upgraded
on TFTP and uploads it to the device for upgrade. After specifying the next file enabled by the system is completed, the configuration is saved and restarted to take effect.
View the device space size: Upload OS files with FTP protocol
S5850-32S2Q#copy mgmt-if ftp://192.168.1.2 flash:/boot
User name [] admin
Password [] Name of the FTP file to access [] FSOS-S5850-v7.2.2.r.bin
Are you sure to overwrite flash:/boot/FSOS-S5850-v7.2.2.r.bin? [confirm] Download from URL to temporary file.
Get file from ftp://admin@192.168.0.58:21/FSOS-S5850-v7.2.2.r.bin
Connected to 192.168.1.2 (192.168.1.2)
220 http://www.aq817.cn
Name (192.168.1.2:admin):
331 Password required for admin.
230 User admin logged in.
Remote system type is UNIX.
Using binary mode to transfer files.
200 Type set to I.
local: /tmp/recv2139 remote: FSOS-S5850-v7.2.2.r.bin
200 Port command successful.
150 Opening data connection for FSOS-S5850-v7.2.2.r.bin…………………………………………..
226 File sent ok
25398924 bytes received in 21.6 secs (1.2e+03 Kbytes/sec)
Copy the temporary file to its destination.
……………………………………………………………………………………………..
25398924 bytes in 0.2 seconds, 124018 kbytes/second
Specify the FSOS-S5850-v7.2.2.r.bin file as the file for the next system restart
S5850-32S2Q(config)# boot system flash:/boot/FSOS-S5850-v7.2.2.r.bin
Save configuration and restart
S5850-32S2Q(config)#write
S5850-32S2Q# reboot
Building configuration…
Reboot system? [confirm] enter
Restarting system.- Restart for Verification
After the restart is complete, check the current device system running
version.
S5850-32S2Q# show version
FSOS Software, S5850-32S2Q, Version 7.2.2
Copyright (C) Fiberstore Inc. All rights reserved.
The current running image is flash:/boot/FSOS-5850-v7.2.2.r.bin
S5850-32S2Q uptime is 0 days, 0 hours, 57 minutes
Hardware Type is 32S2Q
Hardware Version is 2.0
SDRAM size 1024M
Flash size 2048M
EPLD Version is 1.2
BootRom Version is 8.1.1
System serial number is CG170728002977N005
Current Web Version is 6.2.27
- Restart for Verification
3.2 Upgrade by WEB Interface
Network Topology
Configuration Steps
3.2.1 Configure the IP of management interface
It needs to enter the CLI interface to open the switch configuration
management port IP address and open the HTTP service in WEB interface software
upgrade.
S5850-32S2Q#config
S5850-32S2Q(config)#management ip address
192.168.1.1/24
S5850-32S2Q(config)#service http enable
3.2.2 Login in the WEB Interface
Sure that the IP addresses of PC and switch as the same network segment, enter
the management port IP address: 192.168.1.1 in the URL
field of the browser, and then enter the default username and password:
admin/admin
3.2.3 Upgrade the
switch system file on the WEB Interface
After entering the switch WEB interface, select “System Management > File
Management > upload image”, then click “Use Image”
NOTE: Select the file to be upgraded on the WEB
interface, please do not close the upgrade page or power off the device during
the upgrade.
3.2.4 View the current system version running on the WEB interface
https://www.fs.com
The information in this document is subject to change without notice.
FS has made all efforts to ensure the accuracy of the information, but all
information in this document does not constitute any kind of warranty.
Copyright 2009-2022 FS.COM All Rights Reserved.
References
- 久久精品国产亚洲av蜜臀|婷婷色国产精品视频一区|AV 在线 高潮喷吹|国产精品自在在线午夜精华在线|国产亚洲日韩一区二区三区|最新无码网站在线观看
- FS.com - HPC, Data Center, Enterprise, Telecom
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>