Klipsch GIG XL Bluetooth Party Speaker Instruction Manual
- June 13, 2024
- Klipsch
Table of Contents
GIG XL Bluetooth Party Speaker
Instruction Manual
GIG XL Bluetooth Party Speaker
INSIDE
Your power cable may be different.
BUTTONS
- Master Volume
- BASS
- On/Off
- Play/Pause
- Light Show
- Battery Charge
- Forward
- Reverse
- Bluetooth®
- Microphone Volume
BLUETOOTH® WIRELESS TECHNOLOGY
* Example only. Your device may differ.
BATTERY CHARGE
To check the amount of charge, unplug the GIG XL and press the button to trigger the battery charge indicator.
MICROPHONE
LIGHT SHOW
USB CHARGING
The GIG XL must be powered on to charge your device.
USB AUDIO
MP3 and WAV Files Only!
AUX IN
CARE AND CLEANING
TWS (TRUE WIRELESS STEREO)
For 2 GIG XL Only!
Hold 3 Seconds on BOTH Speakers
If one or both speakers are already connected via Bluetooth:
Hold 3 Seconds on ONE Speaker
Model Name: Portable Bluetooth Party Speaker Model: GIG XL
IMPORTANT SAFETY INSTRUCTIONS!
- READ these instructions.
- KEEP these instructions.
- HEED all warnings.
- FOLLOW all instructions.
- DO NOT use this apparatus near water.
- CLEAN ONLY with dry cloth.
- DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- ONLY USE attachments/accessories specified by the manufacturer.
- USE ONLY with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- UNPLUG this apparatus during lightning storms or when unused for long periods of time.
- REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
- To completely disconnect this apparatus from the AC Mains, disconnect the power supply plug from the AC receptacle.
- The mains plug of the power supply apapter shall remain readily operable.
- DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire.
WARNING: To reduce the risk of fire or electrical shock, do not expose
this apparatus to rain or moisture.
WARNING: No naked flame sources – such as candles – should be placed on
the product.
THIS PRODUCT USES LITHIUM-ION BATTERIES.
IF MISUSED OR ABUSED THIS CAN RESULT IN:
- Smoke or gas hazard
- Heat hazard
- Fire hazard
- Explosion hazard
WARNING: Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
WARNING: Do not handle leaking or damage Lithium batteries.
WARNING: Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.
WARNING: Operating temperature between 32ºF/0ºC and 113ºF/45ºC. Altitude
not higher than 5000m (air pressure not less than 54.0kPa).
Please dispose of any used batteries properly, following any local
regulations. Do not incinerate.
In Singapore, please only use the provided 3-pin detachable plug adapter to
charge or power the product.
WARNING: This product is intended to be operated ONLY from the AC
Voltages listed on the back panel or included power supply of the product.
Operation from other voltages other than those indicated may cause
irreversible damage to the product and void the products warranty. The use of
AC Plug Adapters is cautioned because it can allow the product to be plugged
into voltages in which the product was not designed to operate. If the product
is equipped with a detachable power cord, use only the type provided with your
product or by your local distributor and/or retailer. If you are unsure of the
correct operational voltage, please contact your local distributor and/or
retailer.
IPX4: This product meets the waterproof grade requirements of IPX4. That
is, splashing water in all directions of the shell has no harmful effect.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by Klipsch
Group, Inc. could void the user’s authority to operate the equipment
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.
Industry Canada Regulatory Information
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Industry Canada Regulatory Information
CAN ICES-003 (B)/NMB-003 (B)
IC Radiation Exposure Statement: This equipment complies with IC
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between
the radiator & your body. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
EU/UK COMPLIANCE INFORMATION
Operation frequency band (Bluetooth): 2402 MHz – 2480 MHz
Max. transmitted RF power < 10 dBm
Eligible to bear the CE mark; Conforms to European Union Low Voltage Directive
2014/35/EU; European Union EMC Directive 2014/30/EU; European Union
Restriction of Hazardous Substances Recast (RoHS) Directive 2011/65/EU;
European Union WEEE Directive 2012/19/EU;European Union Eco-Design Directive
2009/125/ EC; European Union Registration, Evaluation, Authorization and
Restriction of Chemicals (REACH) Directive 2006/121/EC; European Union Radio
Equipment Directive (RED) 2014/53/EU.
Hereby, Klipsch Group Inc. declares that this product is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU.
You may obtain a free copy of the Declaration of Conformity by contacting your
dealer, distributor, or Klipsch Group, Inc.’s worldwide headquarters. Contact
information can be found here: http://www.klipsch.com/Contact-Us
EU importer: Klipsch Group Europe B.V.
Address: Kapteynstraat 1, 2201 BB, Noordwijk, the Netherlands
UK importer: Henley Audio Ltd.
Address: Unit B, Park 34, Collett, Didcot, Oxfordshire, OX11 7WB
WEEE NOTICE
Note: This mark applies only to countries within the European Union (EU)
and Norway.
This appliance is labeled in accordance with European Directive 2012/19/EU
concerning waste of electrical and electronic equipment (WEEE). This label
indicates that this product should not be disposed of with household waste. It
should be deposited at an appropriate facility to enable recovery and
recycling.
KEEPERS OF THE SOUND
3502 WOODVIEW TRACE, INDIANAPOLIS, IN, USA
KLIPSCH.COM
©2023, Klipsch Group, Inc. Klipsch Group, Inc. is a wholly-owned subsidiary of
Voxx International Corporation. Klipsch and Keepers of the Sound are
trademarks of Klipsch Group, Inc., registered in the United States and other
ountries. The Bluetooth® word mark is a registered trademark owned by
Bluetooth SIG, Inc. and any use of such mark by Klipsch Group, Inc. is under
license.
V06 – 230404