MeTra 99-8265HG Single DIN Dash Kit Instruction Manual

: June 13, 2024
: Metra

Table of Contents

KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS
TOOLS REQUIRED
DASH DISASSEMBLY
KIT ASSEMBLY
Documents / Resources

MeTra 99-8265HG Single DIN Dash Kit Instruction Manual

KIT FEATURES

ISO DIN radio provision with pocket
Painted high gloss black

KIT COMPONENTS

A) Radio housing trim panel
B) Radio brackets
C) Pocket
D) (4) #6 x 3/8” Phillips screws
E) (2) #8 x 3/8” Phillips screws

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wiring Harness: Please visit metraonline.com for wiring harness options
Antenna Adapter: Please visit metraonline.com for antenna adapter options

TOOLS REQUIRED

Panel removal tool
Phillips screwdriver
10mm socket wrench

Attention! With the key out of the ignition, disconnect the negative battery terminal before installing this product. Ensure that all installation connections are secure before cycling the ignition to test this product.

DASH DISASSEMBLY

Unclip and remove the trim panel from around the factory radio, including the clock. (Figure A)
Remove (4) 10mm bolts securing the radio, then remove it. (Figure B)

DASH DISASSEMBLY

KIT ASSEMBLY

Attach the radio brackets to the radio housing trim panel using the (4) #6 x 3/8” screws supplied. (Figure A)
Mount the pocket to the radio brackets with the (2) #8 x 3/8” Phillips screws supplied. (Figure B)
Remove the metal DIN sleeve and trim ring from the aftermarket radio.
Slide the radio into the assembly and secure with the screws supplied with the radio. (Figure C)
Locate the factory wiring harness and antenna plug in the dash and make all necessary wire connections to the radio.
Metra recommends using the proper mating adapters from Metra and/ or AXXESS. Test the radio for proper operation.
Mount the new radio assembly into the dash.
Reassemble the dash in the reverse order of disassembly.

Having difficulties? We’re here to help.

Contact our Tech Support line at:
386-257-1187
Or via email at:
techsupport@metra-autosound.com

Tech Support Hours (Eastern Standard Time)
Monday – Friday: 9:00 AM – 7:00 PM
Saturday: 10:00 AM – 7:00 PM
Sunday: 10:00 AM – 4:00 PM

KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.
Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians

Documents / Resources

| MeTra 99-8265HG Single DIN Dash Kit [pdf] Instruction Manual
99-8265HG Single DIN Dash Kit, 99-8265HG, Single DIN Dash Kit, DIN Dash Kit, Dash Kit
---|---