Metra 120955817 Dash Kit Instruction Manual

Metra 120955817 Dash Kit

Product Information

The product mentioned in the user manual is the 120 95-5817 Double-DIN Receiver Installation Kit. It is designed for vehicles that require modifications to fit a Double-DIN receiver into the dash. The installation kit allows for a proper fit of the receiver, but it may require permanent modifications to the vehicle’s dash. The kit is compatible with Ford vehicles manufactured between 1995 and 2011.

Product Usage Instructions

1. Before starting the installation, ensure that you have the necessary tools, including a file or rotary tool.
2. Read and understand the cautionary note provided in the manual. Always exercise caution when cutting or drilling in a vehicle. Wear eye protection and be mindful of wiring, windows, fuel lines, and safety devices.
3. Begin by carefully removing portions from the top and bottom rim of the dash opening as shown in the provided diagram. Use a file or rotary tool for this step.
4. As you remove material from the dash, periodically measure or test fit the receiver to ensure a proper fit. It is recommended to remove portions gradually rather than removing too much material at once.Z
5. During the test fitting process, make sure to use only the receiver without the side brackets in place. If the receiver is fully snapped into place, it cannot be removed without removing the
6. dash panel.
7. Once a proper fit is achieved, refer to the instructions supplied with the 120 95-5817 installation kit to complete the receiver installation.

Note : For any technical support or assistance, you can contact customer support at 1-800-955-9094.

Instructions for Double-DIN Receiver Applications

120 95-5817 Supplemental

Permanent modifications will be necessary in order to allow a Double-DIN receiver to fit into the dash of vehicles that use the 120 95-5817 installation kit. Removal of dash material is required. Once modifications are made, the factory unit may not properly fit if reinstalled.
Notes:

• Do not remove too much material. It is better to remove portions and measure or test fit as you go.
• Test fit using the receiver only. The side brackets should not be in place. If the receiver is fully snapped into place, it cannot be removed without the dash panel being removed.

1. Using a file or rotary tool, carefully remove portions from the top and bottom rim of the dash opening as shown.
2. Once a proper fit is achieved, complete receiver installation following instructions supplied with the 120 95-5817 installation kit.

Tools Required

CAUTION:
Always be careful when cutting or drilling in a vehicle. WEAR EYE PROTECTION. Be aware of things such as wiring, windows, fuel lines and safety devices. Check drilling depth and location to avoid damage to vehicle appearance.

KIT FEATURES

• ISO DDIN radio provision

Note:

• Sub-dash modifications are necessary to use this dash kit. You will need to trim the sub-dash to gain suitable depth and height.
• Once the kit is snapped in, it cannot be removed without dash panel removal.

KIT COMPONENTS

• A) ISO DDIN brackets
• B) Filler bar

APPLICATIONS
See application list inside cover

WIRING & ANTENNA CONNECTIONS

(SOId separately)

Wiring Harness:

• Please visit metraonline.com for wiring harness options

Antenna Adapter:

• Not required

Tools Required

• Dremel/Cutting tool
• Metra 86-5618 removal keys

CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.

APPLICATIONS

Ford

• Crown Victoria …………………………………………………………….. 1995-2011
• Econoline ……………………………………………………………………. 1997-2008
• Escape……………………………………………………………………….. 2001-2007
• Excursion ……………………………………………………………………. 2000-2005
• Explorer ……………………………………………………………………… 1995-2001
• Explorer Sport Trac ………………………………………………………. 2001-2005
• F-250/350/450/550 ……………………………………………………… 1999-2004
• F-650/750 ………………………………………………………………….. 2000-2010
• Ranger ……………………………………………………………………….. 1995-2011
• Windstar …………………………………………………………………….. 1999-2003

Lincoln

• Continental …………………………………………………………………. 1995-1997
• Mark VIII …………………………………………………………………….. 1995-1998
• Town Car ……………………………………………………………………. 1995-2002

Mazda

• B-Series Pickup …………………………………………………………… 1995-2009

Mercury

• Cougar (with 6 disc in-dash) ……………………………………………… 2000-2002
• Grand Marquis …………………………………………………………….. 1995-2011
• Marauder ……………………………………………………………………. 2003-2004
• Mariner ………………………………………………………………………. 2005-2007
• Mountaineer ……………………………………………………………….. 1997-2001

Dash Disassembly

• All Vehicles ……………………………………….. 3
  • Ford Crown Victoria 1995-2011
  • Ford Econoline 1997-2008
  • Ford Escape 2001-2007
  • Ford Excursion 2000-2005
  • Ford Explorer 1995-2001
  • Ford Explorer Sport Trac 2001-2005
  • Ford F-250/350/450/550 1999-2004
  • Ford F-650/750 2000-2010
  • Ford Ranger 1995-2011
  • Ford Windstar 1999-2003
  • Lincoln Continental 1995-1997
  • Lincoln Mark VIII 1995-1998
  • Lincoln Town Car 1995-2002
  • Mazda B-Series Pickup 1995-2009
  • Mercury Cougar (with 6 disc in-dash) 2000-2002
  • Mercury Grand Marquis 1995-2011
  • Mercury Marauder 2003-2004
  • Mercury Mariner 2005-2007
  • Mercury Mountaineer 1997-2001

Kit Assembly

• ISO DDIN radio provision …………………….. 3

Dash Disassembly

All vehicles

1. Using the Metra 86-5618 removal keys, slide the radio out of the radio cavity. Unplug and remove the radio.
2. Cut and remove obstructions in dash cavity.
   ATTENTION : Be careful not to cut into harnesses or electronic components.

Continue to kit assembly

Kit Assembly

ISO DDIN radio provision

1. Attach the ISO DDIN brackets to the radio using the screws supplied with the radio. (Figure A)
2. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Test the radio for proper operation.
3. Slide the completed assembly into the modified subdash until it clicks into place.
4. Clip the filler bar into the bottom of the radio opening under the radio assembly with the rounded edgesfacing toward the dash. Tip: Hook one side in then push the other side in until it clips. (Figure B)

CAUTION:
ONCE THE KIT IS SNAPPED IN, IT CANNOT BE REMOVED WITHOUT DASH PANEL REMOVAL.

IMPORTANT
If you are having difficulties with theinstallation of this product, please call our Tech Support line at 1-800-253-TECH.Before doing so, look over the instructions asecond time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.

KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians

METRA. The World’s best kits.™ metraonline.com
© COPYRIGHT 2004-2016
METRA ELECTRONICS CORPORATION

References

• Installer Institute Announces Closure after 31 Years | installerinstitute.edu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>