BABY LOCK BLCS-CLF Serger Clear Foot Instructions
- June 13, 2024
- Baby Lock
Table of Contents
Serger Accessories
Clear Foot
(BLCS-CLF)
Instructions
LOCK BLCS-CLF Serger Clear Foot
Use the clear foot for better visibility when attaching ribbons and lace, or
for guiding lightweight decorative stitching.
When cover stitch threading is complete, the loose threads should initially
interlock on fabric. This is most important when sewing the chain or cover
stitches.
PREPARING THE MACHINE -(Any stitching application can be used). Select one and check the instruction book for length and width setting for specific stitch selection.
- Cut all threads to 4 inches (10cm) in length.
- Place fabric under the presser foot directly below the needles.
- Lower the presser foot.
- Turn the handwheel toward you to form 2 or 3 stitches.
- Start to sew slowly.
- After the first few stitches, stop and cut excess threads.
- Start the next seam at the toe of the presser foot.
- You only need to raise and lower the presser foot when working with thick fabrics or when precise positioning is required.
Note: Be careful not to push or pull the fabric. The BLCS will feed it evenly without help.
FOR THE LOVE OF SEWING
800-422-2952
www.babylock.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>