baby lock BLDW-L2 Deluxe Walking Foot with Three Soles Instructions
- June 13, 2024
- Baby Lock
Table of Contents
baby lock BLDW-L2 Deluxe Walking Foot with Three Soles
Instructions
The Baby Lock Deluxe Walking Foot is wonderful for fabrics that stretch or slip easily, such as velvet or corduroy. This foot has a set of feed dogs that help feed multiple layers evenly without shifting. This walking foot comes with three easily interchangeable soles, a standard sewing sole, open toe sole and a stitch-in-the-ditch sole. It also comes with two exclusive 4.5” extension quilting bars.
Baby Lock Exclusive Features:
- 1/4” cutout on the inside left and right toes of each sole for stitching 1/4” away from a seam or marking.
- Rubber feeding system that helps feed fabric evenly.
- Vertical marking on each sole 1/4” in front for turning corners.
To Attach Walking Foot on the Machine:
- Raise the needle and presser foot.
- Remove the presser foot, presser foot holder and presser foot holder screw.
- Attach the walking foot to the presser bar by inserting the fork onto the needle clamp pin.
- Securely tighten the walking foot to the presser bar with the presser foot holder screw.
Note: For high shank machines attach the adapter (included with machine) to the presser bar first to extend the length of the presser bar before attaching walking foot.
To Replace the Sole:
-
Loosen the screw three to five turns (Figure #1) and slightly pull the sole holder out to release the sole.
-
Align the holes of the replacement sole so both sides are inserted in the holes, two holes on the left and one on the right (Figure #2).
-
Tighten the screw.
Helpful Hints:
- Use this foot when sewing only forward feeding stitches.
- Operate the machine at low to medium speed.
- To use the needle threader, lower the presser foot and raise the needle to the highest position.
To Attach Seam Guide:
- Place U-shaped piece over the top of foot and line up with the holes on the foot.
- Insert seam guide into U-shaped piece and through foot. Insert right guide into right side of walking foot; insert left guide into left side of walking foot.
- Push guide through to the desired width.
- Tighten the large screw so the screw is tight and the guide doesn’t move when sewing.
Customer Support
FOR THE LOVES OF SEWING
www.BabyLock>com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>