baby lock BLE8-S7 Plain Hemmer Foot Instructions

June 13, 2024
Baby Lock

baby lock BLE8-S7 Plain Hemmer Foot

baby lock BLE8-S7 Plain Hemmer Foot

Baby Lock Serger Accessories

Instructions

Guide fabric into a perfectly straight hem without any preproject pressing. The plain hemmer is designed to be used for straight hemming only. Leave one seam of the garment open. After hemming, sew the seam closed.

Machine Settings

Stitch type: Chain stitch
Stitch width: M-7.5
Needle: C2 needle position
Stitch length: 3-4
Upper knife: Disengaged “LOCKED”
Differential feed: N
Sewing speed: Moderate to slow
Upper looper Down
Sewing table: On

Fabrics:
Firm broadcloth, trigger, weaver’s cloth, lightweight denim.
Not intended for use on polar fleece or sweatshirt fleece.

Note: When using BLCS-2 or BLCS the accessory adaptor BLCS-AA is needed.

Instructions:

  1. Secure attachment to table with guide fixing screws.
  2. Turn under 1/4 inch and press with iron.
  3. Raise presser foot. Slide fabric into attachment with the wrong side facing up, turning up and over to the left.
  4. With a sewing awl, slide folded fabric under presser foot to the needle.
  5. Lower the presser foot. Turn the handwheel 3-4 times to secure the fabric.
  6. Align the attachment with the needle to sew the fabric edge.
  7. With right hand, keep hem turned while left hand is guiding folded fabric into the hemmer

Baby Lock Sashiko Accessories

Instructions

Guide fabric into a perfectly straight hem without any preproject pressing. The plain hemmer is designed to be used for straight hemming only. Leave one seam of the garment open. After hemming, sew the seam closed.
baby lock BLE8-S7 Plain Hemmer Foot

Machine Settings

Stitch length: 2-5mm
Stitch space length 2-5mm
Sewing speed: Moderate to slow

Fabrics:
Firm broadcloth, trigger, weaver’s cloth, lightweight denim.

Instructions:

  1. Secure attachment to base of machine with guide fixing screws.
  2. Turn under 1/4 inch and press with iron.
  3. Raise presser foot. Slide fabric into attachment with the wrong side facing up, turning up and over to the left.
  4. With a sewing awl, slide folded fabric under presser foot to the needle.
  5. Lower the presser foot. Take a few stitches to secure the fabric.
  6. Align the attachment with the needle to sew the fabric edge.
  7. With right hand, keep hem turned while left hand is guiding folded fabric into the hemmer.

Instructions:

Customer Support

800-422-2952
www.babylock.com

Documents / Resources

| baby lock BLE8-S7 Plain Hemmer Foot [pdf] Instructions
BLE8-S7, BLE8-S7 Plain Hemmer Foot, Plain Hemmer Foot, Hemmer Foot
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals