baby lock BLQ-CCF Creative Couching Foot Set Instructions
- June 12, 2024
- Baby Lock
Table of Contents
baby lock BLQ-CCF Creative Couching Foot Set
Product Information
The Baby Lock Couching Foot Set is a collection of three interchangeable couching feet designed for use with quilting machines. Couching is a decorative threadwork technique that involves laying threads, yarns, ribbons, or other fibers across a quilt and securing them in place with the machine’s quilting thread. This set allows you to add unique and creative touches to your quilts by couching a variety of materials.
The kit includes the following items:
- 1.5 mm couching foot (QM10519)
- 2.0 mm couching foot (QM10521)
- 3.0 mm couching foot (QM10518)
- M4 screw (QM10173)
The couching feet are compatible with the Baby Lock Jewel, Crown Jewel, Crown Jewel II, Tiara, and Tiara II quilting machines.
Product Usage Instructions:
- Ensure that your machine is fitted with the mount compatible with the interchangeable hopping feet.
- If another foot is currently attached to the mount, use the 2.5mm hex wrench to loosen the mounting screw enough to slide the foot off.
- Slide the desired couching foot onto the mount, aligning the opening on the side of the foot with the screw hole. Push the foot up as far as it will go.
- Use the 2.5mm hex wrench to fully tighten the foot. Ensure that the foot is centered with the needle. If it is not centered, loosen the lock nut, center the foot with the needle, hold it in position, and firmly tighten the lock nut. Recheck the position.
- Thread your machine with the desired quilting thread as usual.
- Select the appropriate couching foot size based on the weight of the fiber you wish to couch. Thread the fiber through the opening on the couching foot from the top. You can use a tooth floss threader or lay the fiber over the top of the foot and take several tacking stitches to push it through the hole. Pull the loose end of the fiber through the hole in the couching foot.
- Begin stitching, allowing the machine’s quilting thread to secure, or couch, the fiber to the quilt.
Note: It is recommended to use the 1.5mm couching foot to ensure proper
centering with the needle. Rotate the handwheel slowly to confirm its position
and check the position of the other couching feet.
If you have any questions or need further assistance, please visit your
Authorized Baby Lock Retailer or contact the Baby Lock Consumer Helpline at
800-313-4110. For more information, you
can also visit www.babylock.com.
Overview
Couching is a decorative threadwork technique in which threads, yarns, or
other fibers are laid across the quilt and fastened in place by the machine’s
quilting thread. The three sizes of couching feet in this kit enable you to
couch a wide variety of threads, yarns, ribbons, and other fibers to add a
special touch to your quilts.
Your machine should already be fitted with the mount that works with the
interchangeable hopping feet. These instructions describe how to attach and
use the couching feet.
To attach one of the couching feet
- If another foot is on the mount, use the 2.5mm hex wrench to loosen the mounting screw far enough that you can slide the foot off of the mount.
- Slide the desired couching foot onto the mount. Note that the opening on the side of the foot is lined up with the screw hole. Push the foot up as far as it will go.
- Ensure the foot is centered with the needle when the foot is fully tightened with the 2.5mm hex wrench. If it isn’t properly centered, loosen the lock nut; center the foot with the needle; hold the foot in position; and firmly tighten the lock nut. Recheck the position.
NOTE : We recommend that you use the 1.5mm couching foot to ensure the
foot is centered with the needle. Then slowly rotate the hand wheel to confirm
its position and check the other couching feet position.
IMPORTANT : If your machine didn’t come already equipped with the feet
mount, you need to convert from the original hopping foot to the feet mount
using the Hopping Foot Conversion Kit (BLQ-HFK).
Kit Contents
- 1.5 mm couching foot (QM10519)
2.0 mm couching foot (QM10521)
3.0 mm couching foot (QM10518)
M4 screw (QM10173)
You may also need:
- 2.5mm hex tool (This tool came with your quilting machine or conversion kit.)
To use a couching foot
-
Thread your machine as usual with the desired quilting thread.
-
Match the weight of the fiber to be couched with the size opening in the couching foot. Thread the fiber through the opening on the couching foot from the top.
Either use a tooth floss threader to thread the couching foot, or lay the fiber to be couched over the top of the couching foot and take several tacking stitches to push the fiber through the hole; then pull the short, loose end of the fiber through the hole in the couching foot.
-
Begin stitching. As you stitch, the machine’s quilting thread will fasten, or couch, the fiber to the quilt
Tips for using the couching feet
The couching feet work equally well with the Baby Lock Jewel, Crown Jewel,
Crown Jewel II, Tiara, and Tiara II quilting machines. These tips apply to all
of the machines.
- Use thinner fibers with the smaller (1.5mm or 2.0mm) couching feet.
- If your machine thread isn’t properly couching the fibers, try using a smaller couching foot. The fiber should fill the opening in the couching foot but still pull smoothly through the hole. Also consider slowing down your quilting.
- Make sure you pull a good amount of fiber from the spool or ball to ensure that it is able to move freely through the hole in the couching foot as you stitch. There always needs to be some slack so that the stitching and the fiber stay together.
- Once the fiber is threaded through the couching foot and you begin stitching, you don’t need to guide the fiber being couched. Simply quilt as you normally would. If you know you are going to be quilting in a particular direction, you can orient the fiber in that direction – but it isn’t necessary. As long as you have sufficient slack in the fiber, it will move through the hole in the foot as you quilt.
- Keep the fibers being couched from getting twisted or knotted as you work.
- The machine’s thread color can be the same color as the fibers to be couched, or a contrasting color. As you are developing your coaching techniques, we recommend that you use a matching thread color.
If you have questions, visit your Authorized Baby Lock Retailer. Baby Lock
Consumer Helpline: 800-313-4110
www.babylock.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>