REV-A-SHELF RV-8PSC-11-5 20-Quart Soft Close 1 Pull-out Trash Instruction Manual
- June 8, 2024
- REV-A-SHELF
Table of Contents
INSTALLATION INSTRUCTIONS
CHROME UNIVERSAL WASTE PULLOUT
TOOLS REQUIRED:
ESTIMATED ASSEMBLY TIME:
15 MIN
CARE AND MAINTENANCE:
Clean with a damp cloth and wipe parts dry.
Parts List
No.| Description| Qty
1| Frame| 1
2| Slides| 2
3| Uprights| 2
4| Handle| 1
5| #8-32 X 3/8″ Flat Head Machine Screws| 4
6| #8 X 3/4″ Truss Head Deep Thread Screws| 4
7| #8 Washers| 4
8| Waste Container (20 qt or 32 qt)| 1
9| Wire Basket*| 1
- Dependent on unit purchased. If your unit did not come with a basket, you can call Rev-A-Shelf’s customer service team to order one. Part Number: RV814BB-1-CR
INSTALLATION INSTRUCTIONS: CHROME UNIVERSAL WASTE PULLOUT
I-RUKD-1121
STEP 1
Determine the position you would like to install your waste container, ensuring cabinet frame or hinges does not interfere with the unit (See Figure 1).
STEP 2
Match the frame hole locations with slide hole locations and snap the frame into the slides (See Figure 2). STEP 3
Extend the slides to full extension and use the (4) #8 washers and #8-32 X 3/8” flat head machine screws to secure the frame to the slides (See Figure 3).
STEP 4
Place frame in desired position (determined in Step 1) inside the cabinet. Mark and pre-drill screw locations using 3/32” drill bit and #8 x 3/4” truss head deep thread screws (See Figure 4). STEP 5
Attach the uprights to the frame and place trash can in the uprights (See Figure 5). STEP 6
Snap the handle to the front upright. (See Figure 6).
Note: Continue to Step 7 if you have a unit that comes with a rear basket. STEP 7
Line up the basket to back clips on the frame and snap into place (See Figure 6).
Note: Not all units come with a wire basket
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>