CANYON GTWS-2 Gaming Headset User Manual

CANYON GTWS-2 Gaming Headset User Manual

Connection

Features

• 5 V DC, 400 mA, 2,0 W
• Battery: 3,7 V; 320 mAh

Package content

1. Earbuds.
2. Charging case
3. Type-C cable
4. Quick guide

Battery charging

Charge the case using USB cable. LED is blinking during charging and turns to solid when topped up.

• Headphones: 30 mAh (x2)
• BT 5.3

Charge the earbuds by putting them to the charging case. LED on earbud glows solid red when charging and turns off when fully charged.

Switching ON/OFF

Switching ON: Insert both earbuds into the charging case to activate them. 1) Take the earbuds out of the case and they will turn on automatically OR Turn on the device: 2) Press the central button for 3 seconds. Switching OFF: Press and hold the central button for more than 5 seconds.

Pairing

Take the earbuds out of the case and place them back in to the case to activate them. Then remove earbuds from the case again. If earbuds fail to auto power on when pairing, please charge them and try again. Go to Bluetooth settings of your Bluetooth’ audio device and select Canyon BT headset. If the device requests a password, enter 0000

Rebooting

When the headset is used again, both earbuds will automatically connect back to the last paired device after pairing. To pair with another device, open Bluetooth settings and pair the new. device as described in “Pairing” section.

Music playing

Select a track, style or an artist on your phone, tablet or other Bluetooth-‘ audio devices. Play / pause: press the central button. Skip track: double press the central button on the right (next) or left (previous) earbud. Voice assistant: press the central button 4 times.

Hands-free mode

Answer / end a call: short press on the central button.
Decline a call: hold the central button for 2 seconds. Switch between game mode and music
mode: long press for 1.5 seconds.
Adjust volume: triple-click the right earbud to increase volume or the left one to decrease.’

Troubleshooting

the devices are connected and the Bluetooth function in your device is ON. Switch the ear buds off and then switch them on again. Ensure that the headset is specified as a sound output device. Reset to factory settings and reconnect.
Distorted sound| Move the earphones closer to the device. Check availability of wireless signals, which can make interference, near your headset and device. Adjust the sound volume on your earphones and device. Switch the earphones off and then switch it on again. Reset to factory settings and reconnect.

If the above actions cannot solve your problem, contact the support service at Canyon http://canyon.eu/ask-your-question/

SAFETY INSTRUCTIONS

Read and follow all instructions before the product use.

1. Protect the device against the high humidity as well as water and dust penetration. Do not use the device in very humid and dusty premises.
2. Protect the device against heating: Do not use it near heating devices and avoid direct sunlight.
3. The product shall be connected only to a corresponding power source. The type of the corresponding power source is specified in the operating manual.
4. Never spray liquid detergents. Use only dry clothes for device cleaning.

WARNINGS

1. The use of the earphones cannot be used with the high volume level within a long time period can result in the temporary or continuous hearing loss.
2. The device dismantling is prohibited. We do not recommend to carry out any repair of this device. Unauthorized repairs result in warranty loss.

According to local regulations, your product and/or its battery must be disposed of separately from household waste. When this product has reached the end of its service life, take it to a recycling facility designated by local authorities.

WARRANTY

The warranty period begins from the date of the product purchase from the Seller, authorized by Canyon. The date specified in your sales receipt or delivery note is the purchase date. During the warranty period, any repair, replace or repayment of a purchase value is made at the discretion of CANYON. To provide the warranty service, the product shall be returned to the Seller purchase location together with its proof of purchase (sales receipt or delivery note). The warranty period is 2 years after the product purchase by a customer.
Service life: 2 years. For use and warranty details, visit http://canyon.eu/warranty-terms/ If you have any questions before returning your device to the store, please email us at support@canyon.eu or you can chat with us at the website canyon.eu/user-help-desk.

Manufacturer: ASBISc Enterprises PLC, lapetou, 1, Agios Athanasios, 4101, Limassol, Cyprus, +357 25 857000, asbis.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>