immax NEO Pro App User Manual
- June 12, 2024
- immax
Table of Contents
immax NEO Pro App
Product Information
- Communication protocol: Bluetooth
- Battery: 18650, Lithium battery 3.7V/1300mAh
- Charging Time: 5-6 hours
- Working time: 8-11 hours
- Luminous Intensity: 40lm
- Degree of protection: IP65
- Function: light control by app
- Chromaticity: RGB
- Material: PC
- Battery capacity warranty: 6 months
- Product warranty: 24 months
- Package contents: LED solar light, screws, base, pole, user manual
Product Usage Instructions
Download IMMAX NEO PRO and register
- Scan the QR code and download the Immax NEO PRO app or search for and install the Immax NEO PRO app in the App Store or Google Play.
- Launch the Immax NEO PRO app and tap Register to create your own account. Once you have completed registration, log in with your account.
Pairing the product to the application
- Preparation: switch on the device and open the Immax NEO PRO app. Make sure you are connected to the internet and that you have Bluetooth enabled on your phone. If not, put the device into pairing mode (reset it).
- In the app, click the + button, then a window will appear with information about finding a new device. Click on the Add button. The product will then be paired and the Immax NEO PRO app will be added.
Reset device
Switch the device on and off 3 times in succession. The interval between
switching off and on should be 1-2 seconds. Then the light should start
flashing (breathing). The light is in pairing mode.
Remote light control
- If you want to control the light remotely, you need to connect it to the Immax NEO PRO Multi Smart Gateway.
- Open the smart gateway tab and in the Bluetooth device list tab click on + Add device and then Add Bluetooth device. Select the correct device from the device list and go to Confirm.
Manage device groups
- Select one of the devices
- Click on the icon in the top-right corner
- Create group
- Add another device
- After saving, complete the group
- Enter the group panel for unified administration
Note: A group of devices must have the same version. Group management cannot be done for different versions.
Internet remote control
Internet Remote Control: Immax NEO MULTI must be purchased BRIDGE PRO with Bluetooth function, then connect WIFI, remote control through the application. The Bridge must be installed within the reach of the luminaires.
- Connect the gateway to power, press and hold for 3 seconds to add device in the application
- Connect WIFI
- Add the necessary devices remote control
- Add the device to the gateway
- Realize remote control
Maintenance
- Protect the device from contamination and soiling. Wipe the device with a soft cloth, do not use rough or coarse materials. DO NOT USE solvents or other aggressive cleaners or chemicals.
- A Declaration of Conformity has been issued for this product. More information can be found at www.immax.eu. If you have any questions or need advice, please contact us at support@immax.eu.
Technical parameters
- Communication protocol: Bluetooth
- Battery: 18650, Lithium battery 3.7V/1300mAh
- Charging Time: 5-6 hours
- Working time: 8-11 hours
- Luminous Intensity: 40lm
- Degree of protection: IP65
- Function: light control by app
- Chromaticity: RGB
- Material: PC
- Battery capacity warranty: 6 months
- Product warranty: 24 months
- Package contents: LED solar light, screws, base, pole, user manual
Download IMMAX NEO PRO and register
Scan the QR code and download the Immax NEO PRO app Or search for and install the Immax NEO PRO app in the App Store or Google Play.
- Launch the Immax NEO PRO app and tap “Register” to create your own account.
- Once you have completed registration, log in with your account.
Paring the product to the application
- Preparation: switch on the device and open the Immax NEO PRO app.
- Make sure you are connected to the internet and that you have Bluetooth enabled on your phone.
- If not, put the device into pairing mode (reset it).
- In the app, click the “+” button, then a window will appear with information about finding a new device. Click on the “Add” button. The product will then be paired and the Immax NEO PRO app will be added.
Reset device
- Switch the device on and off 3 times in succession.
- The interval between switching off and on should be 1-2 seconds.
- Then the light should start flashing (breathing).
- The light is in pairing mode.
Remote light control
- If you want to control the light remotely, you need to connect it to the Immax NEO PRO Multi Smart Gateway.
- Open the smart gateway tab and in the Bluetooth device list tab click on “+ Add device” and then “Add Bluetooth device”. Select the correct device from the device list and go to Confirm.
- Safety information for this product can be downloaded from www.immax.eu.
- A Declaration of Conformity has been issued for this product, more information can be found at www.immax.eu
- If you have a question or need advice, contact us at support@immax.eu
Manage device groups
-
Select one of the devices
-
Click on the icon in the top-right corner
-
Create group
-
Add another device
-
After saving, complete the group
-
Enter the group panel for unified administration
Note: A group of devices must have the same version. Group management cannot be done for different versions.
Internet remote control
Internet Remote Control: Immax NEO MULTI must be purchased BRIDGE PRO with Bluetooth function, then connect WIFI, remote control through the application. The Bridge must be installed within the reach of the luminaires.
-
Connect the gateway to power, press and hold for 3 seconds to add device in the application
-
Connect WIFI
-
Add the necessary devices remote control
-
Add the device to the gateway
-
Realize remote control
Safety Information
- CAUTION: Keep out of reach of children. This product contains small parts, which may cause suffocation or injury if swallowed.
- WARNING: Every battery has the potential to leak harmful chemicals that can damage skin, clothing or area where the battery is stored. To avoid the risk of injury, do not allow any substance from the battery to come into contact with the eyes or skin. Every battery may burst or even explode if exposed to fire or other forms of excessive heat. Take care when handling the batteries. To reduce the risk of injury from mishandling the batteries, take the following precautions:
- Do not use different brands and types of batteries in the same device
- When replacing the batteries, always replace all the batteries in the device
- Do not use rechargeable or reusable batteries.
- Do not allow children to insert batteries without supervision.
- Follow the battery manufacturer’s instructions for proper battery handling and disposal.
- CAUTION: The product and batteries should be disposed of at a recycling centre. Do not dispose of them with normal household waste.
- CAUTION: To ensure safe use of the product, wires must be brought at the installation site according to valid regulations. The installation must only be carried out by an individual with the appropriate certification in the field of electronics. During installation or when a fault is detected, the power cable must always be disconnected from the socket (in the case of direct connection, the relevant circuit breaker must be switched off). Improper installation can damage the product and cause injury.
- CAUTION: Do not disassemble the product, electric shock may occur.
- CAUTION: Use only the original power adapter provided with the product. Do not operate the device if the power cord shows signs of damage.
- CAUTION: Follow the instructions in the enclosed manual.
Maintenance
- Protect the device from contamination and soiling. Wipe the device with a soft cloth, do not use rough or coarse materials.
- DO NOT USE solvents or other aggressive cleaners or chemicals.
- A Declaration of Conformity has been issued for this product.
- More information can be found at www.immax.eu
- If you have any questions or need advice, please contact us at support@immax.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>