SOLIGHT WPH-200W-006 LED High Bay Light Instruction Manual
- June 12, 2024
- Solight
Table of Contents
SOLIGHT WPH-200W-006 LED High Bay Light
Product Information
- Product Name: CZ WPH-200W-006 LED High Bay 200W DALI
- Input Voltage: AC90~305V
- Rated Power: 200W
- Material: Not specified
- Luminance: Not specified
- Operating Temperature: Not specified
- Chromaticity: Not specified
- Dimensions: 194.00 x 64.00 x 79.00 mm
- Beam Angle: Not specified
- IP Protection: Not specified
- Colour Rendering: Not specified
Dear customer, thank you for purchasing our product. Please read the following instructions carefully and follow them to serve you safely and to your full satisfaction. This will prevent misuse or damage. Avoid unprofessional handling of this appliance and always observe the electrical appliance usage guidelines. Keep the instruction manual carefully. Installation may only be carried out by a qualified worker qualified in accordance with Decree No. 50/1978 Coll., as amended, at least a worker who is knowledgeable in accordance with Section 5 of Decree No. 50/1978 Coll., as amended.
TECHNICAL PARAMETERS
- Model WPH-200W-006
- Input voltage AC90~305V
- Frequency 50/60 Hz
- Rated power 200 W
- Material Hliník
- Luminance 140lm/W
- Operating temperature -30°C ~ +50°C
- Chromaticity 5000K
- Dimensions ⌀336,5 × 194mm
- Beam angle 120°
- IP Protection IP65
- Colour rendering >80Ra
The package contains:
- 1 pc LED High Bay Light
- 1 pc Instructions
- 1 pc Installation ring and safety rope
WARNING
- Read the operating instructions carefully before installation.
- Have only a qualified person or a professional technician install the luminaire.
- Before installation, check that the local voltage range matches the operating voltage of the luminaire.
- If the luminaire is damaged, it should be replaced by a contractor, service representative or qualified person.
- Protect the luminaire from fire, surges and vibration.
- Use extreme caution to prevent fire or electric shock.
INSTALLATION
DIMENSIONS
WIRING DIAGRAM
The light source of this luminaire is non-replaceable, at the end of its
service life the entire luminaire must be replaced and disposed of in a
designated place. This product contains a light source that for design reasons
cannot be removed for verification and therefore the entire product is
considered a light source. The power cord cannot be replaced if damaged, the
unit must no longer be used.
Solight Holding, s.r.o., Na Brně 1972, Hradec Králové 500 06, Česká republika.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>