tpi U18TE-HD 18 Inch Premium Fan Owner’s Manual
- June 12, 2024
- TPI
Table of Contents
OWNERS MANUAL
READ AND SAVE THESE INSTRUCTIONS
18″ Premium Fan
MODEL: U1 8TE-HD 
IS1054
U18TE-HD 18 Inch Premium Fan
TPI CORPORATION. WARRANTY
warrants every new fan to be free of defects and workmanship to the extent
that, within 1 year from the date of purchase TPI shall either repair or
replace at their option, any unit or part thereof, returned to TPI freight
pre-paid and found to be defective. A return authorization must be obtained
prior to any warranty work and a proof of purchase may be required.
This warranty does not include any labor or transportation cost incidental to
the removal and reinstallation of the unit at the user s premises. Components
repaired or replaced are warranted through the remainder of the original
warranty period only. This warranty applies to the original purchaser-user
only.
Purchaser is responsible for and shall maintain and use the equipment pursuant
to TPI s recommendations. No parts will be covered due to the neglect of
maintenance on equipment, nor due to electrical surges or lightning or other
acts of nature. The purchaser shall hold TPI harmless from any claim or loss.
Claims may be filed under this warranty and obligations to make repairs shall
begin only after the product is paid. This warranty does not cover loss of
time, inconvenience, loss of revenue, livestock, poultry, or other
consequential damages of any kind.
The limited warranty is given in partial consideration of the time of purchase
and is the only warranty offered. There shall be no other warranty either
expressed or implied which apply to this purchase.
Assembly & Operating Instructions 18″ Air Circulators
CAUTION: Read and follow all instructions before operating fan. Do not
use fan if any part is damaged or missing.
WARNING
- To reduce the risk of electrical shock, do not use this fan with any solid state speed control device.
- To Reduce The Risk of Electric Shock, Do Not Expose to Water or Rain.
- For Use in Agricultural Buildings.
This appliance has a 3-prong grounded plug and must be inserted into a
matching grounded GFI outlet for safe operation and to reduce the risk of
electrical shock.
Rules for Safe Operation
- Never insert fingers or any other objects through the grill guard when fan is in operation.
- Unplug the fan when moving from one location to another.
- Unplug the fan when removing guards for cleaning.
- Do not use with an extension cord.
- Do not place fan or any parts near an open flame, cooking or other heating appliance.
- DO NOT use fan in windows.
ASSEMBLY INSTRUCTIONS
Wall Mounting – Permanent Mounting Only
- Locate solid wall stud. Mark the center of the beam. If you do not have a solid structural framing member at that location then you must provide an adequate alterative for mounting the fan.
- Drill pilot hole for 3/8″ lag bolt.
- Secure with the hardware provided.
NOTE: Plug fan Into a GFI outlet to ensure safety.
OPERATION INSTRUCTIONS
To adjust airflow upward or downward: Tilt the fan head to the desired
angle. This high velocity fan can be used alone or in conjunction with air
conditioning. Rotating the fan head upward serves to pull air from the floor
and circulate it throughout the entire room.
Speed Control: Pull Switch to Low or High speeds for respective air velocity.
It is normal for the motor to feel warm to touch after continuous operation.
This fan features a thermostat that will automatically shut off should it
overheat for any reason. If this happens, immediately unplug the fan from the
outlet
CLEANING
WARNING: Unplug from electrical supply source before cleaning. After
servicing, any safety device (including grills and blades) must be reinstalled
or remounted as previously Installed. Use soft damp cloth then wipe with dry
cloth. Do not use harmful cleaners. Do not bend the blades.
The motor bearings are permanently sealed and do not require additional
lubrication.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>