tpi P1000 CO2 Smart Probe User Manual
- October 30, 2023
- TPI
Table of Contents
SP1000 CO2 Smart Probe
Test Products International, Inc.
Uses NDIR CO2 sensor for accuracy Connects to smart phone and uses the TPI Smart Probe App Perform ambient CO2 level checks Up to 6 SP1000 smart probes can connect to a single mobile device (most devices) 3 Year Limited Warranty Test the TPI Advantage Visit www.testproductsintl.com
INTRODUCTION
- Congratulations: Thank you for purchasing TPI products. The SP1000 is easy to use and built to last. It is backed by a 3 year limited warranty.
- Product Description: The SP1000 is an ambient CO2 “Smart Probe”. It connects to your mobile device and uses the TPI Smart Probe App to display temperature readings. Data can be exported to a CSV file as well.
SAFETY CONSIDERATIONS
-
Never attach the SP1000 to a hot surface.
-
Never breath directly into the SP1000 while performing measurements.
Doing so will skew the actual ambient reading. -
Do not expose the unit to damp environments for extended periods of time.
SPECIFICATIONS
SP1000 Smart Probe Ambient Air CO2 Meter Specifications
Range| 0 to 6,000 ppm
Resolution| 1 ppm
Unit| ppm
Accuracy| +1- (50ppm+3% of measurement) at (0 to 5,000ppm Range)
41- (100ppm+7% of measurement) at (5,000 to 6,000ppm Range)
Operating Temperature| -20°C to 50°C (-4°F to 122°F)
Storage Temperature| -20°C to 60°C (-4°F to 140°F)
Measurement Interval| 2 seconds
Communication| Bluetooth version 4.2 (Use with TPI Smart Probe or View app)
FCC ID: QOQBDM113 IC: 5123A-GBM113
209-J00204
Battery Type| AAA x 3 (4.5V)
Battery Life| 30 hours typical
Weight| 99.5 g (3.5 oz)
INSTRUMENT OVERVIEW
TAKING A MEASUREMENT
-
Download and install the TPI Smart Probe App onto your mobile device. Run the App. The “Main-Real Time” screen will be displayed.
The App will say “No Devices” until a smart probe has been connected. -
Press and hold the SP1000 On/Off key down until it turns on. The LED indicator will initially be orange and blink.
The SP1000 will auto connect to your mobile device. The LED indicator will turn Green and blink to indicate a link has been established. The App will display the model and ID number of the smart probe connected. If the SP1000 does not auto connect tap refresh on the App.
ADDITIONAL APP FEATURES
- Tapping “Graph” switches the display to graph mode. The temperature will be displayed as a line graph. If multiple SP1000’s are being used, each will have a different color in the App.
- Tapping “Data” switches the display to show the measured data in a list format. Each reading in the list will be dated and time stamped.
- Tapping the mail icon enables test data to be exported in a CSV file via email.
- Exported data in the CSV file display with the date and time stamp.
If a company and customer name has been entered they will be exported too. See page 5 for setting up the customer and company name.
Company Name :| Test Products Intl|
---|---|---
Company Address :| 9615 SW Allen Blvd|
Customer Name :| Sample Customer|
Customer Address :| 1111 Sample Way|
Building Name :| Bldg 3|
Building Address :| 2222 Sample Ave|
| |
Date| Time| SP1000-008(ppm)
5/9/2018| 13:30:42| 601
5/9/2018| 13:30:40| 599
5/9/2018| 13:30:38| 597
5/9/2018| 13:30:36| 595
5/9/2018| 13:30:34| 593
5/9/2018| 13:30:32| 590
5/9/2018| 13:30:30| 589
5/9/2018| 13:30:28| 587
DROP DOWN MENU
The Smart Probe App has a Drop Down menu allowing access to additional app features.
Main – Real Time: Tapping this returns you to the main screen.
Select Application: Tapping this pulls up sub applications for variious smart
probes. These include Temperature differential (SP341), Air Volume Calulation
(SP565), and Tightness Test (SP620). Note: There are no sub applications for
the SP1000.
Company Info: Allows you to enter your information to show up on the CSV file
report. You can enter your company name, address, and email.
Customer Info: Allows you to enter the information of the customer the
tests are being performed for.
You can enter the customer name, address, and email.
You can also enter the building information in cases where the tests are being
performed somewhere off-site from the customer.
Exit: Closes the Smart Probe App.
ENTERING COMPANY AND CUSTOMER INFORMATION
The Smart Probe App allows you to enter your company information and the customer information who the test is being performed for. This information will be exported in the CSV file (see page 4).
PERFORMING AMBIENT AIR TESTS
-
Start the app on your smart device.
-
Turn the SP1000 on. If multiple SP1000’s are being used turn each one on after one has connected to the smart device.
-
Move from room to room with the SP1000 allowing the readings to stabilize in each area. Take care not to breath directly into the sensor area. Doing so will cause the readings to rise and be inaccurate.
Another option is to leave the SP1000 in an area on a table face up or use the magnet on the back to attach it to something metal. This will prevent any chance of breathing into the sensor area and skewing the readings. -
The measurement data can be exported in a CSV file for report generation.
MAINTENANCE
- Clean the surface of the instrument with a damp cloth.
- Replace the three AAA batteries when the low battery indicator appears.
TROUBLE SHOOTING
| Symptom | Probable Cause |
|---|---|
| CO2 seems inaccurate. | • Low battery. |
• Make sure not to breath into the sensor area during tests.
• Ensure connection with phone is working.
SP1000 does not turn on.| • Dead or low batteries.
• Not holding down power switch until unit turns on.
• Defective POWER ON switch.
CO2 reads high all the time.| • Make sure not to breath into the sensor during
tests.
ACCESSORIES
| Included Accessories | Optional Accessories |
|---|---|
| Part Number | Description |
| A1000SP | Soft pouch |
| A925 | Carrying case for 4 smart probes |
| A926 | Carrying case for 1 or 2 smart probes |
Test Products International offers a variety of K-Type thermocouple probes for many applications. Visit www.testproductsintl.com for additional information.
WARRANTY
This product is warranted to the purchaser against defects in material and
workmanship for three years from the date of purchase.
Covered by Warranty: Repair parts and labor; or replacement of the product at
company’s option. Normal transportation charges to the purchaser are also
covered.
Not Covered by Warranty: Damages to the product which are the result of abuse,
improper use or maintenance are not covered. Any other expense, consequential
damages, incidental damages, or incidental expenses including damages to
property are not covered.
Transportation expenses to the company are not covered.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to
you.
To Obtain Warranty Performance: Include with the product: your name, address,
phone number, written description of the problem and proof of purchase date.
Carefully package and return to:
TPI, Inc. 9615 SW Allen Blvd. Beaverton, OR 97005 USA 503-520-9197
www.testproductsinti.com| TPI Canada
342 Bronte Rd. S., Unit 6 Milton, Ontario L9T 5B7 Canada 905-693-8558
www.tpicanada.com| TPI, Europe Ltd.. Longley
House, International Drive Southgate Crawley West Sussex RH10 6A0 England
44(0) 1293 530196 www.tpleurope.com
---|---|---
Implied Warranties: Any implied warranties including implied warranties
of merchantability and fitness for a particular purpose, are limited in
duration to three years from date of purchase.
To the extent any provision of this warranty is prohibited by federal or state
law and cannot be preempted, it shall not be applicable. This warranty gives
you specific legal rights, and you may also have other rights which vary from
state to state.
REPLACING BATTERIES
Test Products International, Inc.
9615 SW Allen Blvd., Ste. 104
Beaverton, OR 97005
Tel: 503-520-9197
www.testproductsintl.com
Test Products International, Ltd.
342 Bronte Road South, Unit #6
Milton Ontario Canada L9T 5B7
Tel: 905-693-8558
www.tpicanada.com
Test Products International Europe Ltd.
Longley House, International Drive
Southgate, Crawley, West Sussex RH10 6AQ
Tel:: +44 (0) 1293 530196
www.tpieurope.com
Documents / Resources
| tpi
P1000 CO2 Smart
Probe
[pdf] User Manual
P1000 CO2 Smart Probe, P1000, CO2 Smart Probe, Smart Probe, Probe
---|---