flexeserve 40003159 Zone 2 Tier – Countertop North America User Guide
- June 5, 2024
- flexeserve
Table of Contents
flexeserve 40003159 Zone 2 Tier – Countertop North America
Operation
Individual Zones – Heating
Each of the model variants are supplied with one set of controls for each
zone. The controls are located behind the valance panel at the base of the
equipment. Set the zone power switch to the ‘ON’ position and the controller
display will illuminate. The display will show the current temperature. The
equipment will begin to heat and reach the established temperature set-point
automatically, generally 185°F (85°C). Where multiple zones are required,
select and set the appropriate zone power switches to the ‘ON’ position
separately. Set the appropriate zone power switches to the ‘OFF’ position to
switch zones off individually.
Adjusting Temperatures
To view the set temperature of each zone, press the ‘SET’ button for half a second, and then release. To change the temperature of an individual zone, press and hold the ‘SET’ button until ‘°F’ flashes on the display. Press the arrow buttons to increase (▲) or decrease (▼) the temperature. Press the ‘SET’ button again to input the new set point
Display and Merchandising
Do not obstruct the fan(s) at the rear of each zone as this can cause the built-in safety shut-off to activate and stop the equipment from working
Troubleshooting
Daily Cleaning
For full details on how to clean this equipment, please refer to the Operation
manual. The polycarbonate risers and ticket strips can be removed and cleaned
by lifting
Once the front polycarbonate risers are removed, crumbs and debris can be swept forwards and out of each zone. Glass shelves, inner side wells, lamp diffuser glass and external surfaces can be cleaned using non-abrasive cleaning products
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>