element E500AC50C 50 Inch 4K UHD HDR Xumo TV User Guide
- October 30, 2023
- Element
Table of Contents
element E500AC50C 50 Inch 4K UHD HDR Xumo TV
Product Information
The product is a TV manufactured by Element Electronics. It comes with a voice
remote, TV stand, stand screws, and two AAA remote batteries. The TV supports
various connections including ANT, HDMI, OPTICAL, HEADPHONE, LAN, USB, and
VIDEO IN. It also has a wireless connectivity feature and requires a wireless
router and internet connection for streaming. Additionally, a smartphone,
computer, or tablet is needed for the initial setup.
Product Usage Instructions
Connect Devices to Your TV
- Check to ensure that you have selected the right cables for the ports and that they are connected securely.
- Connect an outdoor or indoor antenna to the ANT port.
- Connect a Blu-ray or DVD player, gaming console, or other external devices to your TV using the HDMI port.
- For the highest quality audio/visual connection, connect an optical cable from an external digital audio system to the OPTICAL port.
- Connect headphones or external speakers to the HEADPHONE port.
- Connect an Ethernet cable to access a network or the Internet using the LAN port. Alternatively, use the wireless connectivity feature.
- Connect a USB device for browsing photos, music, or videos using the USB port.
- Connect a composite video cable and left-right audio cables from an external AV device to the VIDEO IN ports.
Setting Up Your TV
Installing the stands
- Place the TV screen down on a clean, flat, soft surface to prevent scratches or damage to the screen.
- Use a Phillips screwdriver to attach each stand with the provided screws.
- Place the TV upright on a stable, level surface.
To avoid damage, never carry your TV by holding or putting pressure on the glass.
Setting Up Your Remote
Power your TV remote by inserting the included 2 AAA batteries carefully
matching the (+) and (-) indicated inside the battery compartment.
Pairing your remote to a new Xumo TV:
- If you put batteries in your remote within 15 minutes of plugging in your TV for the first time, your remote will automatically pair to your TV. If not, follow the below instructions.
- Press the button on the remote.
- Select Remote > Pair your remote to your TV.
- Follow the on-screen instructions.
- If pairing fails, turn off your TV and unplug it from the power source. Plug the TV back in, power on, and repeat steps 1-3.
Pairing your remote to an existing Xumo TV
- Press the button on the remote.
- Select Remote > Pair your remote to your TV.
- Follow the on-screen instructions.
Pairing your remote to a sound system
- Press the button on the remote.
- Select Remote > Pair your remote and sound system.
- Follow the on-screen instructions.
How to reset your remote
- Hold the and buttons for 3 seconds until the light at the top of the remote turns solid green.
- Press 9, then 8, then 4 (the light will blink red a few times).
- Hold the and buttons for 3 seconds again.
- Press 9, then 8, then 1.
- Wait for the light at the top of the remote to stop blinking and return to its normal state.
WHAT’S INCLUDED
WHAT YOU’LL NEED (NOT INCLUDED)
CONNECT DEVICES TO YOUR TV
Check to ensure that you have selected the right cables for the ports and that
they are connected securely (cables and external devices not included). Loose
connections can affect your picture and audio quality.
CONNECT DEVICES TO YOUR TV (continued)
SETTING UP YOUR TV
Installing the stands
Do not install the stands if you want to wall mount your TV. See your wall
mount instructions for mount installation details. You will need: a Phillips
screwdriver (not included)
- Place the TV screen down on a clean, flat, soft surface (e.g.: blanket) to prevent scratches or damage to the screen.
- Use a Phillips screwdriver to attach each stand with the provided screws.
- Place the TV upright on a stable, level surface.
SETTING UP YOUR TV (continued)
Setting up your remote
Power your TV remote by inserting the included batteries carefully matching (+) and (-) indicated inside the battery compartment.
Pairing your remote
to a new Xumo TV Before using your remote, you’ll need to pair it with your
TV. If you put batteries in your remote within 15 minutes of plugging in your
TV for the first time, your remote will automatically pair to your TV. Should
you experience any issues, follow the below instructions: Pairing your remote
to an existing Xumo TV
- Press the button
- Select Remote > Pair your remote to your TV
- Follow the on-screen instructions
- If pairing fails, turn off your TV and unplug from the power source. Plug TV back in, power on, and try steps 1-3 again.
Pairing your remote to a sound system
- Press the button
- Select Remote > Pair your remote and sound system
- Follow the on-screen instructions.
How to reset your remote
- Hold the buttons for 3 seconds until the light at the top of the remote turns solid green
- Press , then then 4 (the light will blink red a few times)
- Hold the and buttons for 3 seconds again
- Press then then 1
- Wait for the light at the top of the remote to flash red again With your remote control pointed towards your TV, try pressing the button and then other keys to make sure your remote is working properly
Note: Voice control will not work until you pair your remote. Voice commands only work when your TV is connected to the internet.
TIP: Always replace dead batteries with two brand-new batteries from the same manufacturer. Never use damaged batteries. If your remote gets warm/hot during use, discontinue use and contact customer support immediately.
SETTING UP YOUR TV (continued)
Plug in and turn on the TV
Plug your TV into the wall outlet and press the power button on your remote
control. Your TV will display a launch screen showing the Element and Xumo TV
logos, followed by the first setup screen.
Follow the on-screen instructions
When your TV powers on, follow the easy on-screen instructions for setup.
Connecting your TV to the Internet gives you access to all the things that
make your TV smart, including apps, voice controls, and more. Your TV will
automatically detect wireless networks in your area, so have your network name
and password handy. If you aren’t ready to connect to a wireless network you
can still use it as a regular TV and can connect it later within settings.
Activate your TV
To activate your TV you’ll need a computer, smartphone or tablet. Once you see
the activation code on the TV screen you can visit
xumo.com/activate (or simply scan the QR code on-
screen with your smart device camera) and follow the on-screen instructions to
complete registration. You’ll be directed to the home screen when the setup is
complete. You may also create a Xumo account with a payment method if you
would like to make purchases on your TV. Note: Creating a Xumo account and
adding payment details is optional and not required to use your TV. A paid
subscription or other payments may be required for some streaming channels.
Channel availability is subject to change and varies by country or region.
USING YOUR REMOTE
- Input Change your TV’s input so that you can use connected devices like media players, gaming systems, and sound systems
- Power Turn your TV on and off
- Volume Make your TV louder or softer
- Voice Control Search across your apps and control your TV with just your voice – just press and hold the button, say a command, then release it
- Mute Turn your TV sound on and off
- Settings Press once to open the Settings menu, or press twice to access your accessibility shortcut
- More See more options like program descriptions depending on which screen you’re on
- Navigation Pad Select up, down, left and right Select Confirm your selection
- Last/back Return to the previous screen
- Add the TV show or movie you’ve selected to My List
- Home Return to the home screen
- App shortcuts Launch the labeled app when your TV is connected to the Internet
CONNECTING AN ANTENNA
With the built-in tuner, you can connect your TV to an antenna and enjoy over- the-air entertainment.
- To connect your TV to an antenna, connect a coax cable (not included) into your TV’s ANT port and the other end into your device.
- Turn your TV on and press the home button on your remote.
- Select the Antenna tile, or open Settings > Antenna and inputs > Antenna > Scan for channels
- Follow the on-screen instructions.
UNIVERSAL REMOTE SETUP
If you prefer to use your cable set-top box or satellite receiver remote as a
universal remote, please refer to the manual your cable or satellite service
provided. It includes instructions on how to program your remote to your TV.
LET’S REGISTER YOUR PRODUCT
It’s super easy, just head on over to
elementelectronics.com/register
BENEFITS OF REGISTERING YOUR PRODUCT:
WE’RE HERE TO HELP
Find resources and get help with product setup, connecting devices, technical
issues, downloading manuals and more!
We’re available 24 hours a day, 7 days a week
To download the full Xumo TV User Manual, and review the latest information on common issues and solutions, visit tv.xumo.com/support We recommend keeping your TV box for the duration of your warranty. See your product warranty for details. Element, the Element Logo, and Bring it home are trademarks of Element Brand Holding, LLC. ©2023 Element Brand Holding, LLC. All Rights Reserved. Xumo TV, Xumo Play, the Xumo logos, and all other Xumo product names, logos, slogans or marks are the trademarks of Xumo or its licensors. ©2023 Xumo. All Rights Reserved.
References
- Element Electronics Home - TVs, Audio, Home Entertainment, Appliances
- Product Registration | Element Electronics
- Privacy - Xumo TV
- Support - Xumo TV