CRUX SWRTY-61N Radio Replacement Instruction Manual
- June 12, 2024
- CRUX
Table of Contents
SWRTY-61N
Radio Replacement with Steering Wheel Retention and
Rear-View Camera Retention for TOYOTA Vehicles
PRODUCT FEATURES:
- Retains factory features in select Toyota vehicles while functioning with an aftermarket radio.
- Pre-programmed to retain factory Steering Wheel Controls.
- iPhone Voice Recognition (VR) feature from SWC on select radios.
- Retains OEM Rear View Camera.
- Retains factory USB and auxiliary audio input (aftermarket radio must have these features).
- Includes factory USB retention adapter cable.
- Supports BT-HF/A2DP/AVRCP profile on select aftermarket radio models.
- Supports Pick Up/End Call, Pick up and Toggle between 1st and 2nd incoming call, AVRCP Track, Seek.
- EIA color coded wiring for easy installation.
PARTS INCLUDED:
INSTALLATION DIAGRAM:
SPECIAL NOTE:
On 2013 Toyota Sequoia and Tundra, the parking brake wire (RED wire) is in position#1 on the OEM 28-pin connector. Please insert the YELLOW/BLACK wire on the SWRTY-61N harness into position#1. For all other models, please insert into position# 15. Please check that you are inserting the pin into the correct location as it is difficult to remove it again. The locking tab of the pin should be facing UP when it is inserted into the connector.
DIP SWITCH SETTINGS:
AFTERMARKET RADIO DIP SWITCH SETTINGS:
RADIO BRAND:| DIP:| 1| 2| 3| |
---|---|---|---|---|---|---
Atoto, Dual, Farenheit, Jensen, Pioneer| | OFF| OFF| ON| ON
Power Acoustik, Soundstream| OFF| OFF| ON| ON
Blaupunkt, Most off-brand Radios| OFF| OFF| ON| ON
Alpine| OFF| OFF| OFF| OFF
Clarion| OFF| ON| ON| OFF
Kenwood| OFF| ON| ON| ON
JVC| OFF| ON| OFF| ON
Boss, Old Sony| OFF| ON| OFF| OFF
New Sony| OFF| OFF| ON| OFF
NOTE: For Atoto, Blaupunkt, Dual, Farenheit, Power Acoustik, Soundstream, and most off-brand radios, check the aftermarket radio’s manual to see if the SWC buttons need to be programmed.
TOYOTA STEERING WHEEL CONTROL DIP SWITCH SETTING:
DIP:| 5| 6| 7| 8|
---|---|---|---|---|---
Toyota| OFF| ON| OFF| ON
3.5MM SWC CABLE
Plug in the 3.5MM to 4-Pin SWC cable to the SWC module.
NOTE: Insulate the Blue/Yellow wire or the 3.5mm plug if not being used.
For aftermarket radios that have wires for SWC connections, cut off the 3.5mm
plug on the Crux SWC Cable and connect the SWC wires as follows:
Note that there are some radios that only have SWC1 and SWC2, in this case “shield” does not need to be connected.
24 TO 16 PIN ADAPTER:
Some vehicles do not have the 24-Pin Video Input connector. Instead, they have
a 16-Pin connector that controls the video input for the camera. Use the
optional adaptor and connect to the T-harness to convert the harness to work
with
the 16-Pin connector style.
VEHICLE APPLICATIONS:
SCION
2012 – 2016 FR2016 iM
2012 – 2013 iQ
2012 – 2016 tC
2012 – 2015 xB
2012 xD
TOYOTA
2012 – 2019 4Runner
2012 – 2018 Avalon
2012 – 2017 Camry
2012 – 2017 Corolla
2013 – 2018 Highlander
2012 Matrix
2012 – 2017 Prius
2012 – 2018 RAV4
2012 – 2018 Sequoia
2015 – 2017 Sienna
2013 – 2019 Tacoma
2013 – 2019 Tundra
2012 – 2015 Venza
**Note: See Special Note on page 2.
http://www.cruxinterfacing.com
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: 818-609-9299 • fax:
818-996-8188 •
www.cruxinterfacing.com
rev.021121
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>