baby lock BLE8-LF Lace Applicator Foot Instructions
- June 12, 2024
- Baby Lock
Table of Contents
baby lock BLE8-LF Lace Applicator Foot
instructions
Use this foot for guiding lace onto your fabric with a 2-thread flatlock or to attach ribbon to your fabric under a cover stitch. Or, attach decorative trim by combining an overlock stitch witha chain stitch. Follow your “Quick Reference Threading Guide” for various stitches and settings.
MACHINE SETTINGS
Installation
- Snap on the lace applicator and set up the machine for the stitch you desire.
- Loosen adjustable screw on the top of the lace foot (fig. 1).
- Raise the presser foot.
- Place fabric right side up under the foot up to the cutting blade.
- Insert lace right side down into the guide and under the foot against the inside edge of the guide (fig. 2).
- Align right edge of guide with placement of right edge of lace.
- Move the guide right or left to align with the needles being used (fig. 3).
- Lower the presser foot.
- Check guide position and tighten the screw.
- Test sew sample for desired effect.
ADJUSTMENT OF GUIDE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>