boAt Storm Call 2 Bluetooth Calling Smartwatch User Manual
- June 12, 2024
- Boat
Table of Contents
- Storm Call 2 Bluetooth Calling Smartwatch
- CHARGING THE WATCH
- TURNING THE WATCH ON/OFF
- CONNECTING TO THE APP
- SYNCING YOUR SMARTWATCH TO THE APP
- NAVIGATING THROUGH THE FUNCTIONS
- SETTINGS
- PRODUCT PARAMETERS:
- MAINTENANCE:
- FAQ
- SAFETY & PRODUCT INFORMATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
STORM CALL 2
USER MANUAL
Storm Call 2 Bluetooth Calling Smartwatch
Thank you for choosing the boAt Storm Call 2 as your fitness transformation
companion.
Allow this manual to guide you through the functioning of your smartwatch.
Please read it thoroughly before using it for a smooth sail. You may refer to
these instructions for later use as well.
Package Contains:
- boAt Storm Call 2 x 1
- USB magnetic charging cable x 1
- User Manual x 1
- Warranty Card x 1
CHARGING THE WATCH
The smartwatch must be charged before initial use, It takes up to 2 hours to
be fully charged.
Connect and charge the watch with the image below as a reference, using a
SV/2A adapter.
TURNING THE WATCH ON/OFF
To restart or turn the watch on/off, |long-press the side button for 3-5
seconds.
You can wake up the screen by lifting your wrist.
CONNECTING TO THE APP
-
Download the boAt Crest app on your phone.
Avaifable on both App Store (iOS 12.0 and above) and Google Play Store (Android 7.0 and above) OR
Scan (GR CODE) (Also available on the watch) -
Connect the device with the boAt Crest app: ensure that the phone’s Bluetooth as well as the GPS functionalities are turned on
-
Select Storm Call 2 on the home screen of the app and click pair to connect.
-
Once connected, you will get an alert to connect with STORMCALL2_XXXX, click pair if need to receive or make calls from the watch
-
To use all features of your Storm Call 2 seamlessly, tap on ‘yes’ to the ‘connection’ and ‘grant access’ system prompt.
-
Disable battery optimization
Note: To ensure connectivity throughout your journey, make sure the app is allowed to always run in the background of your phone.
SYNCING YOUR SMARTWATCH TO THE APP
Data synchronization
- Open the app on your phone.
- Make sure your Storm Call 2 Is connected to the app.
- Synchronization will start automatically once you enter the app interface.
Note:
Synchronize data at least once a day to avoid data loss in the watch.
NAVIGATING THROUGH THE FUNCTIONS
SHORT PRESS THE SIDE BUTTON FOR MAIN MENU
Call
Dialer
To use the BT Calling feature, open the boAt Crest app and pair the watch.
Once paired you will get the pop-up on the app home screen to connect with the Phone’s Bluetooth.
Click on “pair” to connect with the phone’s Bluetooth.
Alternatively, you can go to the phone’s Bluetooth settings and pair
“STORMCALL2_XXXX™ to start the calling feature on your watch.
Note: Enable call alerts from the setting to get calls on the watch
Phone Book
Add up to 10 contacts from boAt Crest app. You can select any contact to
directly dial from the watch.
Call History
You can find recently received, missed, and outgoing call logs In the
recent calls of the watch.
Activities
Choose from multiple sports modes like Walking, treadmill, Running,
Badminton, Football, Basketball, Tennis. Yoga, Dancing, Cycling, Indoor
Cycling, etc. The watch has 700+ activity modes. You can also add or replace
the activities according to your preferences through boAt Crest app.
Tap on any sport mode to start the activity, click the go button, and the
watch will start recording the duration of the activity. Swipe right to pause
or stop the activity. The activity will not be recorded if it is less than 3
mins.
Activity Record
Sync your smartwatch to the app to get a detailed record of the activities.
Heart Rate Monitor
Wear the watch on your wrist, then click on the icon to start measurements.
You can also view the data on the app.
Note: Measurements are for reference only and not for medical purposes
SpO2 monitoring
Wear the watch on your wrist, then click on the icon to start measurements.
You can also view the data on the app.
Note: Measurements are for reference only and not for medical purposes,
Sleep Monitor
Tap on the icon to review the sleep data of the previous night.
Once the asleep criteria are met. your smartwatch will start recording from 8
pm at night to 10 am in the morning the next day.
Once you lie down and watch detects no movement for 30 minutes, it will start
recording, and will stop recording if it detects excessive movement.
You can check the data on the app only after the awake criteria is met.
You can also track sleep scores on the boAt Crest app.
Note:
For accurate sleep data recording. the asleep criteria have to be met which
includes limited movement, wrist positions and angles, and more.
The awake criteria will be met only after it records some noticeable movement
Breathe exercises
Click on the breath exercises icon to regulate your breathing by doing
breathing exercises. You can set the time and level of exercise.
Notification
You can check all the notifications from here.
Stopwatch
Click on this to start the stopwatch on your watch.
Timer
Tap on this to turn on the timer.
Alarm
Tap on this to set an alarm on your watch.
Flashlight
Tap on this to turn your dial into a flashlight.
Camera Controt Mode
Tap on the remote camera icon on your smartwatch to click a photo from your
phone.
Note: Turn the camera on from your phone to use this feature. Music
Control
Music Control
Tap on the remote music control icon on your watch to play music from your
phone.
Note: Some apps with different protocols might not work.
Find My Phone
Tap on this icon to find your phone, Once enabled, your phone will start
ringing and vibrating. Tap again to stop it.
Note: Your smartwatch should be connected to your phone via Bluetooth and
within its range for this feature to work.
SETTINGS
Watch Faces
Tap on this icon to change your watch face.
Screen Sleep
Tap on this and adjust the screen sleep time
Ringtone
Tap on this to choose the ringtone and put the watch on silent mode
Wake Gesture
Tap on this to enable wake gesture
Vibration
Tap on this to adjust vibration fevels from strong, soft and none.
Do Not Disturb
Tap on this to turn on the Do Not Disturb mode.
System
Tap on this to restart, reset or to power off the smartwatch
Download App
Tap on this and scan the GR code from mobile to connect the smartwatch.
About
Shows the device details
Regulatory
Shows the device regulatory details
Voice Assistant
Tap on this to enable the voice assistant feature and give the command from
the watch.
Note: Make sure the watch is connected with the app
SWIPE DOWN FOR SHORTCUT MENU
You can access DND, Alarm, Find my phone, Brightness, and Settings
SWIPE LEFT OR RIGHT TO ACCESS ALL DATA.
You can access daily activity, SpO2, Heart rate, sleep, phone and
notifications.
SWIPE UP TO ACCESS THE LIVE SCORE
You can check the cricket live scores from here.
SHORT PRESS THE SIDE BUTTON FOR BACK
Short press the side button to go to the previous tab.
PRODUCT PARAMETERS:
Model | boAt Storm Call 2 |
---|---|
Screen type | 1.83″ HD Display |
Battery capacity | 23OrnAh |
Net weight | 41.5g |
Bluetooth version | Bluetooth Si |
Working temperature | -20ºC- 60ºC |
Charging brae | 70 mins |
Working tine | 4-6 days |
Water Resistance | IP67 |
Frequency band | 2.4GHz |
MAINTENANCE:
Regularity dean your wrist and the strap of the smartwatch, especially after sweating during exercise or being exposed to substances such as soap or detergent, which may get stuck on the other end of the product.
Do not wash the strap with a household cleanser. Please use soap less
detergent, rinse thoroughly and wipe with a piece of soft towel or napkin.
For spots or stains that are not easy to remove, scrub the area with rubbing
alcohol and then follow the above procedure.
FAQ
Search for the app to connect keeps failing
1. Keep the boAt Crest app updated to the latest version 2. Close ail the programs on the watch → Stop and restart Bluetooth and GPS → Connect again 3. Check and enable notification functions of your phone and keep the phone and watch in close contact. Note: Make sure your phone system meets Android 7.0 and above and iOS 12.0 and above.
My Watch Storm Call 2 is receiving no alerts, texts, or phone calls
Make sure smart reminders on the app are on and synced to the Storm Call 2, Also make sure your notification center of the phone |s displaying messages. Only then will your smartwatch also display those notifications. Make sure app is running in the background and battery optimization feature on the phone is disabled.
My Bluetooth keeps getting disconnected
1. Make sure there is not more than 7m distance between Bluetooth on the phone & the watch. 2. There is no obstacle in between the watch and the phone. 3. Make sure the app is running In background
Which functions of the Storm Call 2 need Bluetooth to work?
Call & Text Notifications, Find My Phone, music control, camera control, weather forecast, cloud and custom watch faces and need Bluetooth connectivity to work.
Will it be okay to take a bath wearing the Storm Call 2?
The IP67 water resistance will only work under the following conditions: (1) Maximum depth of water: 1.5m (2) Maximum time for exposure to water: 10 minutes The watch isn‘t suitable for hot baths, hot springs, saunas, snorkeling. diving, water skiing and other wading or deep-water activities with high-speed water flow.
SAFETY & PRODUCT INFORMATION
Battery
- Do not disassemble, bore or damage the battery.
- Do not disassemble the built in batteries of non-replaceable battery devices.
- Do not use sharp objects to remove the battery.
Health Warning
- If you are wearing a pacemaker or other implanted electronic devices, please consult your doctor before using the heart rate monitor of the watch.
- The optical heart rate sensor will glow green. If you suffer from epilepsy or are sensitive to blinking light sources, please consult your physician before wearing this device.
- The device tracks your dally activities through sensors. This data is intended to tell you about your daily activities such as steps, sleep, distance, heart rate and calories, but may not be completely accurate.
- The device accessories, heart rate sensor, oxygen level monitor, and other relevant data is designed for fitness and not for medical purposes. They are not applicable to the diagnosis, monitoring, treatment or prevention of any diseases or symptoms. The heart rate and blood pressure data is for reference only. We’re not responsible for any deviation in data.
- Avold wearing the watch too tightly. Make sure you keep your skin dry – the area that comes in contact with the watch. If symptoms such as redness or swelling appear on your skin, immediately stop using the watch and consult the doctor.
Things to keep in mind
- Sync data everyday days to avoid data loss.
- Water Resistance will not work for seawater, acidic and alkaline solutions, chemical reagents & other corrosive liquid. The damage or defects caused by misuse or Improper use are not covered by the warranty.
- Sports modes support up to 6 hours of exercise at a time.
- Avoid wearing the watch too tight in daily use. Keep the parts of skin touching the watch dry.
- Keep your arm stil while measuring data for accurate measurement.
Disclaimer: This product is an electronic monitoring product and is not intended as a medical reference. We reserve the right to modify or improve any of the functions described in this manual without any prior notice. At the same time. we hold the right to continuously update the product content.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT SUBSTITUTE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Old electrical appliances must not be disposed of together with the residual
waste, but have to be disposed of separately. The disposal at the communal
collecting point via private persons Is for free. The owner of old appliances
Is responsible to bring the appliances to these collecting points or to
similar collection points, With this little personal effort you contribute to
recycle valuable raw materials and treatment of toxic substances.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>