Enduro Engineering MTB Mini Bike Deflector Arms Instruction Manual
- June 12, 2024
- Enduro Engineering
Table of Contents
Enduro Engineering MTB Mini Bike Deflector Arms Instruction Manual
MTB/ MINI BIKE DEFLECTOR ARMS INSTALLATION INSTRUCTIONS
-
Determine whether you want the aluminum arm to go above the handlebar or below. Make sure you have clearance for controls. Also determine whether you will mount to the lever perches (MTB ONLY) or straight to the handlebar with the provided caps. (MTB or Mini Bike)
NOTE: Not all bikes will allow you to mount to the perches. -
If you are mounting to the lever perches, using the correct wrench for your bike remove just the caps off of the perches (FIG 1) and set the caps and the mounting bolts to the side.
-
Mount the aluminum arm with the composite mount facing outward. Using the provided socket head bolts thread the bolts through the arm and into either the provided aluminum caps (FIG 2), or into the lever perches. (FIG 3)
-
Using a 4mm allen wrench, tighten the socket head bolts making sure the deflector mount is in the position you prefer. (FIG 4)
-
Repeat process on opposite side.
-
You will have need to have purchased the EE Evo2 plastic roost deflector in the color of your choice. Mount those using the provided Phillips head screws. (FIG 5)
-
Have Fun and enjoy your next ride!
WARNING AND DISCLAIMER
All parts manufactured, designed or sold by Enduro Engineering, Inc (EEI) are to be installed by a licensed motorcycle dealer or a licensed motorcycle technician, Motorcycles can be dangerous. Serious injury, death and property damage can result from the use of motorcycles. This risk is increased by improper installation or misuse of after marker parts. EEI’s customers must exercise good judgement in the use, control, alteration, part selection and installation, and maintenance of their motorcycles. In the event of a possible defect in material or design, or any other defect in a part manufactured, designed or sold by EEI, the responsibility of EEI is limited either a refund of the purchase price or the replacement of the part if EEI determines the part to be defective, and subject to EEI’s inspection of the part within thirty 130) days from the date of purchase. (Note: any attempted repairs or modifications made to EEI Products will void this limited warranty.) EEI, under no circumstances will be responsible for incidental and/or consequential damages, property damage, personal injury damage, or damage, injury, cost or expense of any kind or nature whatsoever. By purchasing as product or a product sold by EEI, you (1) acknowledge the above disclaimer and agree to its terms; (2) agree that any claim brought against EEI arising from and/or pertaining to or otherwise related to a part manufactured, designed or sold by EEI must be brought in the Michigan State Courts located in the County of Ingham or in the Federal District Court for the Western District of Michigan and the Michigan law shall apply on all issues; and (3) any claim against EEI must be brought within one (1) year of purchase of the product EEI makes no other warranty, express or implied, including without limitation any warranties of merchantability and fitness for a particular purpose.
MTB/ Mini Bike Deflector arms
Installation instructions
53-3022
Quality Off-Road Motorcycle Products
enduroeng.com/1517.393.2421//infoeenduroeng.com
