XTREME XLP7-1009-BLK 5 in 1 Wireless Charging LED Desk Lamp User Manual

XTREME XLP7-1009-BLK 5 in 1 Wireless Charging LED Desk Lamp

INTRODUCTION

Thank you for choosing our 5 in 1 LED Desk Lamp. This versatile lamp combines the functionality of a lighting solution with convenient wireless charging capabilities for Qi-compatible devices. With its foldable hinge for easy watch charging and USB-A and Type-C USB watch charging ports, it offers a multi- functional and user-friendly experience. This user manual will guide you through the setup process and provide instructions for optimal usage of the LED Lamp.

FEATURES

• Qi-Compatible wireless charging

• AirPods wireless charging

• Multi white light settings

• Clock display

• Alarm

• Type-C USB and USB-A charging ports for
  smart watch charging

• Wireless phone charging stand

• Apple Watch charger holder

• 20W Type-C USB PD Charging Adapter

WIRELESS CHARGING CAUTIONS AND TIPS

• To prevent damage to the phone or the charger:
• Remove metal cases, or cases with any magnet/metal components, from phone before charging.
• Do not place metal objects on the charger during charging
• Qi wireless chargeable phones with metallic finishes will charge normally.
• Very thick phone cases can obstruct wireless charging. For effective charging, it may be necessary to reposition the phone or remove the case.
• Consider tuning off your phones vibrating notifications during charging, as vibrations may cause your phone to shift position on the charger and stop charging.

Troubleshooting Tip: The power adapter is equipped with overload protection. In the unlikely event that the lamp and the charging of multiple products cause too much load on the power adapter, the the adapter may switch off. If this happens, turn off the lamp or remove one of the products being charged for some time, until the charging load decreases.

GETTING TO KNOW YOUR 5 IN 1 DESK LAMP

INSTALLATION

• Carefully remove the LED Lamp and its accessories from the packaging.
• Unfold the lamp by extending the lamp arm and adjusting it to your desired height.
• Connect the lamp to the 20W Type-C USB Power Adapter provided using the included cable and connect adapter to wall power outlet.

Tip: For 1 SW phone charging: to ensure charging of some fully discharged 1 SW phones you may need to power off the LED light for some time if the phone will not remain charging. Note: To ensure proper operation, only use the supplied 20W power adapter and the supplied 3A USB Type C power cable, or an equivalent 20W PD power adapter and 3 USB Type C cable.

OPERATION

LIGHTING

• To active the light: tap the Power button. The initial setting is cool white light at 50% brightness.
• To change the light modes: When the light is on, tap the Power button to change the light mode between cool white light, warm white light, and white light combination.
• To change the brightness level, tap and hold the Power button, the brightness with increase until it becomes 100%. Remove your finger and tap and hold again to decrease the light level until it becomes 10%.

Note: If you do not change for 5 seconds, the last setting will be automatically saved.

TO TURN OFF/ON THE DISPLAY

Press the clock and alarm key at the same time to turn off the clock display. Shortly press the clock key or the alarm key to reactivate the clock display.

CLOCK SETTING

1. To set the hour: Press and hold the Clock button, that is located to the left of the power key, until the hour digits start flashing.
2. Repeatedly tap the Clock button to change the hour digits. Stop tapping when you reach the desired hour setting and wait for the hour digits to stop flashing. The hour is now set.
3. To Set the minutes: Press and hold the Clock button until the hour digits start flashing, lift your finger and press again until the minute digits start flashing.
4. Repeatedly tap the Clock button to change the minute digits. Stop taping when you reach the desired minute setting and wait for the minute digits to stop flashing. The minutes are now set.
5. To change from 12-hour to 24-hour mode: Briefly tap the Clock button. The AM icon and PM icons will display in 12-hour mode. No AM or PM icons will be displayed in 24-hour mode.

ALARM SETTING

1. To set the hour: Press and hold the Alarm button, that is located to the right of the power key, until the hour digits start flashing.
2. Repeatedly tap the Alarm button to change the hour digits. Stop taping when you reach the desired hour setting and wait for the hour digits to stop flashing. The hour is now set.
3. To Set the minutes: Press and hold the Alarm button until the hour digits start flashing, lift your finger and press again until the minute digits start flashing.
4. Repeatedly tap the Alarm button to change the minute digits. Stop taping when you reach the desired minute setting and wait for the minute digits to stop flashing. The minutes are now set.
5. To activate/ deactivate the alarm: Briefly tap the Alarm Clock button. Turn off clock display.

CHARGING

PHONE WIRELESS CHARGING

• With the lamp extended, place the phone over the wireless charging symbols, in the upright (portrait) or horizontal (landscape) orientation. The phone will begin to charge.

EARPHONE CASE STANO WIRELESS CHARGING

• For Airpods (2nd generation) or Airpods (3rd generation) that have cases that can be charged wirelessly, or Airpods Pro (all generations), place the case on its holder ledge on the rear lower side of the lamp with the case’s status light facing out and up. Make sure that the case is flat against the back panel of the lamp. Once the case is positioned and aligned correctly, the case’s status light should illuminate for a few seconds indicating that the case has started to be wirelessly charged. Note: Other Qi compatible wireless charging earphone cases may also be charged if the case can physically fit, and be aligned correctly, on the Airpods wireless charging ledge and positioned flat against the back panel of the lamp.

WATCH CHARGER SET UP

The 5 in 1 Lamp is equipped with an Apple watch charger holder
where you can place your Apple watch charging puck
(not included) to charge your Apple watch.

1. Unfold the upper back hinge to reveal the watch charging holder. Open lower back panel door to expose the smart watch charging port compartment.
2. Insert your watch charging puck’s cable (not supplied) through the top back opening and thread it down to the charging compartment and plug its USB plug into the matching USB charging port.
3. Pull down excess cable into the compartment and close the lower back panel door.
4. Insert your watch charger into the circular watch charger holder.
5. Place your watch securely on the watch charger and the charging will start.

MAINTENANCE AND SAFETY INFORMATION

• Read all the instructions before using the product, and use the product as intended.
• Disconnect the USB cable once the product is fully charged.
• Keep close supervision of this product if being used around children.
• Do not expose the product to rain or moisture, and do not use nearby water such as swimming pools, bathtubs, or sinks.
• Do not expose the product to heat sources, the sun, or leave in a hot vehicle.
• Do not place metal items on the surface of the product.
• Do not modify or try to use the product for a non-intended purpose.
• Do not cover the product with paper or other materials. Use in a well-ventilated area when charging.
• Wireless chargers generate heat when charging, and the wireless charger may temporarily stop charging if it gets too hot.
• Do not use if damaged or modified.
• Do not dissemble. There are no serviceable parts inside.
• Do not place magnetic strip cards or similar magnetically sensitive items between the phone and the charger. Wireless charging uses magnetic induction that could damage these items.
• Your phone will not charge wirelessly if it is connected to your computer’s USB port, or if it’s connected to a USB power adapter or other USB charging source.
• Do not use abrasive cleaning solvents to clean the unit.
• If you have a pacemaker or other such device, consult a physician before using this product.

This device complies with part 15 of the FCC Rules. Operation is Subject To the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

ONE YEAR LIMITED WARRANTY

Xtreme Cables, Jem Accessories Inc. Limited Warranty Policy for Xtreme”” Products Last Updated: June 25, 2019

This limited warranty contains important information about your rights and obligations, as well as limitations and exclusions that may apply to you.

1. WHAT THIS LIMITED WARRANTY COVERS; PERIOD OF COVERAGE Xtreme Cables, Jem Accessories Inc. 32 Brunswick Ave, Edison, New Jersey, USA, warrants to the owner of the enclosed Xtreme”-branded product contained in this box (“Product”) will be free from defects in materials and workmanship for a period of one year. Notwithstanding the foregoing, the Warranty Period for a factory refurbished Product is one (1) year, even if installed by a professional. If the Product fails to conform to this Limited Warranty during the Warranty Period, Xtreme Cables, Jem Accessories Inc. will, at its sole discretion, either (a) repair or replace any defective Product or component; with proof of purchase using original documentation. Repair or replacement may be made with a new or refurbished product or components, at Xtreme Cables, Jem Accessories Inc. sole discretion. If the Product or a component incorporated within it is no longer available, Xtreme Cables, Jem Accessories Inc. may, at Xtreme Cables, Jem Accessories Inc. sole discretion, replace the Product with a similar product of similar function. This is your sole and exclusive remedy for breach of this Limited Warranty. Any Product that has either been repaired or replaced under this Limited Warranty will be covered by the terms of this Limited Warranty for the longer of (a) ninety (90) days from the date of delivery of the repaired Product or replacement Product, or (b) the remaining Warranty Period. This Limited Warranty is not transferable from the original purchaser to subsequent.
2. TOTAL SATISFACTION RETURN POLICY If you are the original purchaser of the Product and you are not satisfied with this Product for any reason, you may return it in its original condition owners. to the retailer in compliance with the retailer’s return policy.
3. WARRANTY CONDITIONS; HOW TO GET SERVICE IF YOU WANT TO CLAIM UNDER THIS LIMITED WARRANTY Before making a claim under this Limited Warranty, the owner of the Product must (a) visit www.armorallelectronics.com/oneyearwarranty.aspx during the Warranty Period to provide notice of your warranty claim and describe the alleged failure, and (b) comply with Xtreme Cables, Jem Accessories Inc. (or its authorized distributor’s) return shipping instructions. Xtreme Cables, Jem Accessories Inc. will have no warranty obligations with respect to a returned Product if it determines, at its reasonable discretion after examination of the returned Product, that the Product is an Ineligible Product (defined below). Xtreme Cables, Jem Accessories Inc. will bear all costs of return shipping to owner and will reimburse any shipping costs incurred by the owner, except with respect to any Ineligible Product or products shipped internationally, for which the owner will bear all shipping costs.
4. WHAT THIS LIMITED WARRANTY DOES NOT COVER This Limited Warranty does not cover the following (collectively” ineligible Products): (i) Products marked as ~sample” or “ Not for Sale: or sold “AS IS”; (ii) Products that have been subject to: (a) modifications, alterations, tampering, or improper maintenance or repairs; (b) handling, storage, installation, testing, or use not in accordance with any quick start guide, manual or other instructions provided by Xtreme Cables, Jem Accessories Inc.; (c) abuse or misuse of the Product; (d) breakdowns, fluctuations, or interruptions in electric power or the telecommunications network; or (e) Acts of God, including but not limited to lightning, flood, tornado, earthquake, or hurricane; or (iii) any non-Xtreme Cables, Jem Accessories Inc. branded hardware products, even if packaged or sold with Xtreme Cables, Jem Accessories Inc. hardware. This Limited Warranty does not cover consumable parts, including batteries, unless damage is due to defects in materials or workmanship of the Product, or software (even if packaged or sold with the product). Xtreme Cables, Jem Accessories Inc. recommends that you use only authorized service providers for maintenance or repair. Unauthorized use of the Product or software can impair the Product’s performance and may invalidate this Limited Warranty.
5. DISCLAIMER OF WARRANTIES Except as stated above in this limited warranty, and to the maximum extent permitted by applicable law, Xtreme Cables, Jem Accessories Inc. disclaims all express, implied, and statutory warranties and conditions with respect to the product, including the implied warranties of merchantability and fitness for a particular purpose. To the maximum extent permitted by applicable law, Xtreme Cables, Jem Accessories Inc. also limits the duration of any applicable implied warranties or conditions to the duration of this limited warranty.
6. LIMITATION OF DAMAGES In addition to the above warranty disclaimers, in no event will Xtreme Cables, Jem Accessories Inc. be liable for any consequential, incidental, exemplary, or special damages, including any damages for lost data or lost profits, arising from or relating to this limited warranty or the product, and Xtreme Cables, Jem Accessories lnc. total cumulative liability arising from or related to this limited warranty or the product will not exceed the amount actually paid for the product by the original purchaser.
7. LIMITATION OF LIABILITY The Xtreme Cables, Jem Accessories Inc. online services at [email protected] (“services”) provide you information (product information) regarding your Xtreme Cables, Jem Accessories Inc. products or other peripherals connected to your products (~product peripherals”). The type of product peripherals that may be connected to your product may change from time to time. Without limiting the generality of the disclaimers above, all product information is provided for your convenience, as is: and “as available~ Xtreme Cables, Jem Accessories Inc. does not represent warrant, or guarantee that product information will be available, accurate, or reliable or that product information or use of the services or product will provide safety in your home. You use all product information, the services, and the product at your own discretion and risk. You will be solely responsible for (and Xtreme Cables, Jem Accessories Inc. disclaims) any and all loss, liability, or damages, including to your wiring, fixtures, electricity, home, product, product peripherals, computer, mobile device, and all other items and pets in your home, resulting from your use of the product information, services, or product. Product information provided by the services is not intended as a substitute for direct means of obtaining the information. For example, a notification provided through the service is not intended as a substitute for audible and visible indications in the home and on the product, nor for a third party monitoring service that monitors alarm state.
8. YOUR RIGHTS AND THIS LIMITED WARRANTY This Limited Warranty gives you specific legal rights. You may also have other legal rights that vary by state, province, or jurisdiction. Likewise, some of the limitations in this Limited Warranty may not apply in certain states, provinces or jurisdictions. The terms of this Limited Warranty will apply to the extent permitted by applicable law. For a full description of your legal rights you should refer to the laws applicable in your jurisdiction and you may wish to contact a relevant consumer advisory service.

If you need to start a warranty claim for your Xtreme™ device, please reach out to Customer Support by emailing c[email protected] or calling our support number (855)-999-8041.

Please allow 7-10 business days to process warranty claims. Customers located outside of U.S. will be responsible for all shipping costs.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

WHAT’S INSIDE:

5 in 1 Wireless Charging LED Desk Lamp
2DW Type-C USB PD Charging Adapter
3A 3ft Type-C to Type-C USB Power Cable
User Manual

SPECIFICATIONS:

Input:
LED Power: SW
Type-C + USB Output: For Smart Watch Charging
Airpods Wireless Charger Output: 3W
Wireless Charger Output: SW-7.SW-1 OW-1 SW
2OW Type-C USB PD Charger Output: SV DC, 3A/9V DC, 2.22A/12V DC, 1.67A

Customer Support

855-999-8041
WWW.XTREMECABLES.COM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>