SENA SF2 Bluetooth Communication System Double Pack User Guide
- June 12, 2024
- Sena
Table of Contents
- Overview
- Installation
- Sena Motorcycles App
- Sena Device Manager
- Charging
- Button Operation
- Power On/Off
- Volume Adjustment
- Battery Check
- Phone, Music Pairing
- Music Operation
- Mobile Phone Call Making and Answering
- Intercom Pairing
- Intercom Start/End
- Setting
- Troubleshooting
- SF Series Quick Reference
- Customer Support
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SENA SF2 Bluetooth Communication System Double Pack
Overview
Installation
Sena Motorcycles App
- Download
- Android: Google Play Store > Sena Motorcycles
- OS: App Store > Sena Motorcycles
Sena Device Manager
The Sena Device Manager allows you to upgrade the firmware and configure its settings directly from your PC or Apple computer. Download the Sena Device Manager from sena.com.
Charging
Button Operation
-
Tapping
-
Double Tapping
-
Press for 1 sec
-
Press and Hold
Power On/Off
Volume Adjustment
Battery Check
Phone, Music Pairing
- The headset will enter the Phone Pairing mode automatically when you initially turn on the headset.
- For more information on phone pairing, refer to the User’s Guide.
Music Operation
Mobile Phone Call Making and Answering
Intercom Pairing
Intercom Start/End
Setting
Configuration Menu
Troubleshooting
Factory Reset
If you want to restore the Sena SF2 to factory default settings, use the Factory Reset in the configuration menu. The headset automatically restores the default settings and turns off.
Fault Reset
If the Sena SF2 is not working properly for any reason, reset by gently pushing the pin-hole reset button on the back of the main unit.
SF Series Quick Reference
| Type | Operation | Button Command | LED |
|---|---|---|---|
| Basic Function | Power on | Press the Center Button and the (+) Button for 1 | |
| second | Solid blue | ||
| Power off | Tap the Center Button and the (+) Button | Solid red | |
| Volume adjustment | Tap the (+) Button or the (-) Button | – | |
| Microphone Mute | Press the Center Button and the (-) Button for 1 second | – | |
| Mobile Phone | Answer mobile phone call | Tap the Center Button | – |
| End mobile phone call | Press the Center Button for 2 seconds | – | |
| Call a Voice Assistant | Press the Center Button for 3 seconds | – | |
| Speed dial | Press the (+) Button for 3 seconds | – | |
| Reject incoming call | Press the Center Button for 2 seconds | – | |
| Intercom | Intercom pairing | Press the Center Button for 5 seconds | Red |
flashing
Tap the Center Button of any one of the two headsets
Start/End each intercom| Tap the Center Button| –
End all intercoms| Press the Center Button for 3 seconds| –
Start Group Intercom| Tap the (+) Button and the (-) Button at the same
time| Green flashing
End Group Intercom| Press the Center Button for 3 seconds| –
Music| Play/Pause Bluetooth music| Press the Center Button for 1 second| –
Track forward/back| Press the (+) Button or the (-) Button for 1 second| –
FM Radio| FM radio on/off| Press the (-) Button for 1 second| –
Select preset| Press the Center Button for 1 second| –
Seek stations| Double tap the (+) Button or the (-) Button| –
Scan up FM band| Press the (+) Button for 1 second| –
Stop scanning| Press the (+) Button for 1 second| –
Save preset while scanning| Tap the center Button| –
** Available only in SF4
Customer Support
**Sena Technologies Co., Ltd.
Customer Support:** sena.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>