STAYER Professional 55580 Gas Burner User Manual

: June 12, 2024
: STAYER

Table of Contents

STAYER Professional 55580 Gas Burner
Gas burner for cylinder 1300 ° С 1.4 kW
Purpose and scope
Operating and storage conditions
Precautions
Instructions for use
Safety instructions
Safety Guide
Read User Manual Online (PDF format)
Download This Manual (PDF format)

STAYER Professional 55580 Gas Burner

USER MANUAL

Gas burner for cylinder 1300 ° С 1.4 kW

The gas burner is equipped with the latest flash suppression system to ensure high quality performance throughout the product’s life.

Adjustment of the shape of the flame.
Easy selection of temperature conditions.
Fast recharge from a butane bottle for gas lighters.
Instant on, thanks to the built-in piezo ignition.
Multifunctionality.
Powered by a liquid gas cylinder.

The gas torch is designed for heating, melting and welding plastic parts, heating small metal parts and melting metal with a low melting point, bending thin glass tubes. The choice of temperature conditions allows you to maximally meet the requirements of any work. Powered by butane gas. Creates a stable flame with temperatures up to 1300 ° C. Powered by a replaceable cylinder. Product material: metal, plastic.

Purpose and scope

The gas burner is used as an autonomous source of thermal energy.

Designed for melting and welding glass and plastic products, including plastic pipes, synthetic cords and cables. For working with low-melting metals and alloys (lead, tin, zinc, copper, aluminum, gold, silver, etc.), in particular for their soldering and welding.
For heating various objects, for example, to facilitate loosening of threaded connections; for defrosting locks. For removing old paint. For kindling a fire (fireplace, bonfire) in damp weather or in the absence of dry firewood.

The energy carrier for the burner is a conventional gas cylinder with a holder ring. The burner creates a stable flame with a temperature of about 1300 ° C, not exposed to wind and rain.

Please read this manual before operating the product and save it for future reference. Pay attention to the warning labels. Strictly follow the instructions for use and safety. Failure to follow the operating instructions and safety guidelines could result in equipment damage or injury. Due to constant efforts to improve the product, the manufacturer reserves the right to make minor changes to its design that are not reflected in this document and do not affect its efficient and safe operation.

Be careful! Watch for that. what are you doing. Do not use the product if you are tired, have taken alcohol or medications that may cause decreased concentration or drowsiness.

Operating and storage conditions

Operating temperature: from +5 to +35 C
Relative humidity: <85% at a temperature of + 25 ° C
Permissible storage temperature: from -25 to + 40 ° C

Precautions

When working with the product, observe the following precautions:
• protect the product from direct moisture ingress;
• protect the product from the ingress of flammable and corrosive liquids:
• to avoid injury and burns, do not disassemble the gas burner:
• only a qualified technician should repair the product.

Instructions for use

Before work, inspect the product for visible mechanical damage. Keep the work area clean and free from obstructions. Provide good lighting for your work area. Hold the instrument so that it cannot fall out of your hands.

Attention! Failure to follow the safety precautions can result in injury and burns.

Connecting the burner to the gas cylinder

Use a cylinder with a collet connection (bayonet)
Make sure that the gas cylinder is suitable for the burner.
For connection, use cylinders with quality liquefied gas.
Make sure that the burner is off – the gas valve is tightened in the “off” direction, there is a “-” sign on the gas regulator
Shake the cylinder several times to create better pressure in it and therefore to properly supply gas to the burner.
Holding the canister in one hand, gently and firmly align and connect the burner retainer with the slot on the retaining ring on the canister with the other.
Make sure the tip is firmly attached to the cartridge.
Turn the burner clockwise relative to the cylinder as far as it will go.
Disconnection of the nozzle must also be carried out with the valve closed in reverse order.

General safety rules:

Read this instruction manual carefully and follow the recommendations. Be sure to familiarize yourself with the rules for working with a gas burner before lighting and subsequent use. Re-read this manual from time to time for the safe use of the burner. Do not operate the burner before reading the instructions.
Do not point the burner at people or flammable objects. Do not use the torch as a lighter for smoking.
Disconnect the cylinder from the torch every time you take a long break from work.
Never try to modify the burner or use low quality fuel.
Handle the burner with care as you would any other device. Avoid damage.
Do not use the burner in case of leaks, damage or other malfunctions.
Work only in well ventilated areas.
Avoid contact of liquid gas with eyes and skin.
Always work on a refractory backing underneath the material to be treated. If you are not sure if it is a fireproof material, do not use a burner. Do not work on wood or metal surfaces. Always use protective equipment while working.
Always use protective gloves and appropriate tools for work involving elevated temperatures.
Be careful with the burner nozzle as it can become very hot when using the burner. Take precautions to protect yourself and others from accidental burns. Never use the burner near flammable materials.
Be especially careful around cars and any flammable products, and beware of various containers with flammable materials.
To avoid the risk of accidental overturning of the tool, ensure that the gas cylinder with the torch is stable.
When defrosting pipes, be careful not to overheat the heated pipe or nearby materials.
Always keep a fire extinguisher or a bucket of water close to work. Do not place them where you cannot reach them quickly in the event of a fire.

Attention!!! Flammable, the gas cylinder is under pressure.

Keep container away from heat and fire. Do not refill the gas cylinder. Always get a new one after the bottle has run out. Keep the cylinder out of the reach of children. Avoid prolonged exposure to sunlight. Do not store the cylinder in living rooms and in rooms with high temperatures. Always close the burner valve and wait at least 30 seconds before disconnecting the cylinder. Always remove the cylinder after use. Do not breathe gas, smoke, vapor or aerosol. If the gas enters the respiratory tract, remove the affected person to fresh air. Avoid contact with eyes and skin with liquefied gas. In case of contact with skin, rinse with plenty of water. In case of contact with eyes, rinse immediately and thoroughly and seek medical attention. If the bottle is empty, put it in a safe place. Do not dispose of in fire. Do not puncture or ignite the can.

Attention: After finishing work on the burner, close the gas supply regulating valve as far as it will go. After the burner has cooled to inoperative, turn the gas cylinder counterclockwise relative to the burner body, then lay the burner and gas cylinder apart from each other. Pay attention to the warnings on the gas bottle label.

Ignition and Operation

Use only high quality butane or propane gas cylinders. Make sure the on / off control is in the off position. Shake the gas cylinder several times to evenly supply gas to the burner. Turn pressure regulator counterclockwise 2/3 of one turn. Make sure that the gas comes out of the burner nozzle and ignite it using a piezoelectric element, or with a lighter (if there is no piezoelectric element in the product design). Do not turn the gas regulator too much, as the gas supply force will be too great and it will be difficult to ignite the burner. The duration of continuous operation should not exceed 90 minutes. After this time, allow the burner to cool down for 15 minutes.

Attention! A propane gas cylinder contains liquid propane. If the burner with the cylinder is suddenly moved, tilted or turned over, liquid can enter the valve, which can cause a flash or damping of the flame. To avoid this, adjust the flame length to 1/4 of the maximum burner flame length, allow the burner to warm up for 3 minutes, and then smoothly adjust the required combustion level. Make sure the burner is cool before attaching or removing the burner head.
Cold temperature operation:
In cold weather, the size of the flame will be smaller. To obtain a larger flame, wait until the burner with the cylinder has reached room temperature before using the burner. Remember that there is a good chance that the flame will go out if the burner is turned upside down.

Adjusting the temperature

To obtain the maximum combustion temperature, adjust the length of the internal (blue) flame of the burner from 3.5 to 5 centimeters. Adjust the auxiliary air valve (if available on this model) to obtain the desired total flame length.

Switching off

To switch off the burner, turn the gas regulator downwards until it stops. The gas supply stops and the burner stops heating. Wait for the product to cool completely.

Maintenance

Since the gas contains a small amount of impurities, it is necessary to periodically clean the gas nozzle. To do this, turn off the gas regulator, make sure that the gas nozzle has cooled down, and inject liquefied gas directly from the gas cylinder into the gas nozzle. Moisture and dirt can damage the instrument. Store the product 8 in a dry place, away from sources of heat.

Safety instructions

Before starting work, make sure that there is no visible mechanical damage to the product case. Do not leave the device at high temperatures for a long time.

ATTENTION! Do not allow children and persons unfamiliar with the operation rules and requirements of this manual to perform any operations or work with the product. Inspect the product before each use. Use only a product that is in good condition.
Keep the burner away from flammable objects and exposed parts of the body during operation. It is strictly forbidden to operate the tool with a damaged built-in gas cylinder, as well as with a faulty gas supply mechanism!

CAUTION: Always exercise extra care when using the product. Keep the tool out of the reach of children. Be careful, BUTANE gas is highly flammable. The flame of the soldering iron is invisible in sunlight, be extremely careful. The product is recommended to be used at an ambient temperature not exceeding 50 ° C.