LINOVISION POE-Extender02 PoE Extender User Manual
- June 12, 2024
- LINOVISION
Table of Contents
LINOVISION POE-Extender02 PoE Extender
PoE Extender User’s Manual
Version: V1.0.3
Important Safeguards and Warnings
Please read the following safeguards and warnings carefully before using the
product in order to avoid damages and losses.
-
Do not expose the device to lampblack, steam, or dust.
Otherwise, it may cause fire or electric shock. -
Do not install the device in a position exposed to sunlight or high temperature. Temperature rise in the device may cause fire.
-
Do not expose the device to a humid environment. Otherwise, it may cause fire.
-
The device must be installed on a solid and flat surface in order to guarantee safety under load and earthquake. Otherwise, it may cause the device to fall off or turnover.
-
Do not place the device on a carpet or quilt.
-
Do not block the air vent of the device or ventilation around the device. Otherwise, the temperature in the device will rise and may cause fire.
-
Do not place any object on the device.
-
Do not disassemble the device without professional instruction.
Warning
Please use the battery properly to avoid fire, explosion, and other dangers.
Please replace used battery with a battery of the same type. Do not use a
power line other than the one specified. Please use it properly. Otherwise, it
may cause fire or electric shock.
Special Announcement
This manual is for reference only. All the designs and software here are
subject to change without prior written notice. All trademarks and registered
trademarks are the properties of their respective owners. If there is any
uncertainty or controversy, please refer to the final explanation provided by
us. Please visit our website for more information.
Table of Contents
Product Overview
- Features
- Typical Application
Product Overview
PoE Extender is mainly used to cooperate with High PoE Midspan to form a
long-distance transmission plan, transmit Ethernet data via Cat5/5e/6 network
cable, and supply power for IP Camera, cascade multilevel transmission up to
300m.
Device Structure
Appearance Port
Front panel
Installation Guide
Install Device
PoE Extender supports two installation modes which are junction box internal mounting and DIN rail mounting.
- The junction box internal mounting is shown in Figure 3-1.
- The DIN rail mounting is shown in Figure 3-2.
Device Structure
Appearance Port
Front panel
The front panel is shown in Figure 2-1.
Refer to Sheet 2-1 for more details.
| Interface Name | Note |
|---|---|
| IN | 1*10/100M RJ45 port, receive PoE power supply port; yellow indicator shows |
Internet access Link status, green indicator shows network access Act status.
OUT| 110/100M RJ45 port, PoE power supply port, used to supply power for the
next PoE Extender; yellow indicator shows Internet access Link status, green
indicator shows Internet access Act status.
CAMERA| 110/100M RJ45 port, PoE power supply port, used to supply power for
IP Camera; yellow indicator shows Internet access Link status, green indicator
shows Internet access Act status
Installation Guide
Install Device
PoE Extender supports two installation modes which are junction box
internal mounting and DIN rail mounting.
-
The junction box internal mounting is shown in Figure 3-1.
-
The DIN rail mounting is shown in Figure 3-2.
The device dimension is shown in the following figure.
Note
- This user’s manual is for reference only.
- Slight difference may be found in user interface.
- All the designs and software here are subject to change without prior written notice.
- All trademarks and registered trademarks are the properties of their respective owners.
- If there is any uncertainty or controversy, please refer to the final explanation of us.
- Please visit our website for more information.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>