mestic MS-100 Vacuum Cleaner Instructions

mestic MS-100 Vacuum Cleaner

Vacuum cleaner MS-100

Product Information|
---|---
Capacity| 0.6 L
Cord Length| 5 m
Power| 600 W
Voltage| 220-240 V
Container Size| 1.5 L

Product Usage Instructions

Safety Instructions
Read the user manual carefully before using the device and keep the instructions, including the warranty, purchase receipt, and if possible, the box with the internal packaging. If you give this device to other persons, also provide them with the user manual.
Warning: Do not allow small children to play with the power cord as there is a risk of choking!

Symbols in this user manual:

• WARNING: This warns you about health hazards and indicates possible risks of injury.
• CAUTION: This refers to possible hazards to the device or other objects.
• NOTE: This refers to tips and information.

Controls

1. Lock button for dust container
2. Power On/Off switch
3. Handle
4. Closing cap
5. Power cord
6. Suction nozzle
7. Dust container
8. Washable filter

Included Accessories

9. Narrow nozzle
10. Small nozzle
11. Flexible suction hose

Getting Started

1. Check if the filter is correctly placed at the front of the device.
2. Open the vacuum cleaner using the lock button (1).
3. Close the vacuum cleaner again by placing the tab at the front into the corresponding slot.
4. Close the vacuum cleaner by pressing the upper tab into place.
5. Attach the desired accessory with or without the hose at the front of the vacuum cleaner. When using the hose, make sure to

Nozzles:

• Small Nozzle: For vacuuming small surfaces and corners.
• Narrow Nozzle: Ideal for vacuuming car interiors. These nozzles are also great for furniture, upholstery, frames, and more.

Cleaning

1. To clean the filter, press the button (1) to open the device.
2. Remove the filter and store it. The filter can be cleaned under running water. Make sure the filter is completely dry.
3. Attach the dust container and close the vacuum cleaner as described in “Getting Started”.
4. Clean the housing with a dry cloth.

AVVISO:

• Always remove the mains lead before cleaning!
• Under no circumstances should you immerse the device in water for cleaning purposes. Otherwise this might result in an electric shock or fire.

CAUTION:

• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
  1.  To clean the filter, press the button (2) to open the device.
  2. Remove the filter and knock it. The filter can be cleaned under running water. Make sure that the filter is perfectly dry.
  3.  Mount the dust container again and close the vacuum as described in „Putting the Appliance into Operation“.
  4.  Clean the casing with a dry cloth.

After Use
Always unplug the vacuum cleaner when finished. The vacuum cleaner can be stored vertically without losing space.

Noise development
The sound pressure level in the ear of an operator (LpA) was measured according to DIN EN ISO 3744. Sound pressure level detected: 90.0 dB(A) (no limit)

Noise Level
The sound pressure level at the operator’s ear (LpA) was measured according to DIN EN ISO 3744. Detected sound pressure level: 90.0 dB (A) (unlimited)

Declaration of Conformity
Gimeg Nederland B.V. declares that the MS-100 device complies with the basic requirements and other relevant regulations mentioned in the European Directive on Electromagnetic Compatibility (2014/30/EU) and Low Voltage Directive (2014/35/EU). A complete declaration of conformity can be requested at the address provided on the back.
Hereby Gimeg Nederland B.V. declares that the device MS-100, applies all basic requirements and other relevant regulations listed in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage directive (2014/35/EU). If you require a full declaration of conformity, you can contact the adress listed on the backside of this manual.

General Safety Instructions

Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.

• The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
• When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull the plug itself, not the lead) if the appliance is not being used and remove the attached accessories.
• Do not operate the machine without supervision. If you leave the room you should always turn the device off. Remove the plug from the socket.
• The device and the mains lead have to be checked regularly for signs of damage. If damage is found the device must not be used.
• Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type.
•  Use only original spare parts.
• Pay careful attention to the following “Special Safety Instructions“.

Children and Frail Individuals

• In order to ensure your children‘s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

WARNING: Do not allow small children to play with the foil as there is a danger of suffocation!

• This device is not intended to be used by individuals (including children) who have restricted physical, sensory or mental abilities and/or insufficient knowledge and/or experience, unless they are supervised by an individual who is responsible for their safety or have received instructions on how to use the device.
• Children should be supervised at all times in order to ensure that they do not play with the device.

Operating components

1. Release button for collection container

2. On/off switch

3.  Handle

4. Tube cover

5.  Power cord

6.  Suction opening

7.  Dust collection container

8. Washable filter
   Supplied accessories

9. Crevice brush nozzle

10.  Small brush nozzle

11. Flexible hose

Putting the Appliance into Operation

1. Check whether the filter is inserted correctly on the front of the device.
2.  Open the vacuum with the fastener (2).
3. Close the vacuum again by inserting the flap on the front in the relevant slot.
4.  Close the vacuum by locking into place the upper flap.
5. Mount the desired accessory with or without the hose on the front of the vacuum. When using the hose make sure that the curved side is facing down.
6.  Connect the device to a duly installed 230V, 50Hz protective contact socket.
7. To start the vacuuming, press only the On/Off (I/O) switch.
8. Since the device has a removable and washable filter, there is no need to buy spare dust bags.

Technical Data
Model: ………………………………………………………………………………………………………………………………………………………………………… MS-100
Power supply: ………………………………………………………………………………………………………………………………………………………. 230 V, 50 Hz
Pmax.: ………………………………………………………………………………………………………………………………………………………………………….. 600 W
Protection class: …………………………………………………………………………………………………………………………………………………………………… ΙΙ

• This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.
• Subject to technical changes without prior notice!
• Recycling
  This product bears the selective sorting symbol for waste electrical and electronic equipment This means that this product must be handled pursuant to European Directive (2012/19/EU) in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human heath due to the presence of hazardous substances.

Importer:
Gimeg Nederland B.V.
Atoomweg 99, 3542 AA Utrecht
The Netherlands

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>