mestic MCCHD 33 Koelbox Compressor Instruction Manual
- June 3, 2024
- mestic
Table of Contents
mestic MCCHD 33 Koelbox Compressor
Features
- Lid handle
- Display
- Handle
- Cable connection
- Ventilation
Delivery
- Cooler box
- Connection cable for 12V / 24V DC
- Instructions manual
Accessories (not included with the shipment)
1502950 Mestic AC adapter (220-240)
General Safety Instructions
Read the operating instructions carefully before putting the appliance into
operation and keep the instructions including the warranty, the receipt and,
if possible, the box with the internal packing. If you give this device to
other people, please also pass on the operating instructions.
Algemene veiligheid:
- Read the manual before use.
- If the conditions of use are not complied with, the manufacturer will not be liable for damage or injury resulting from the use of this device.
- Save the manual, the warranty certificate and the sales receipt.
- The use of this device is not permitted for young children. During use, someone must constantly supervise.
- Children must be supervised to ensure that they do not play with the device.
- This device is not intended for use by children up to 8 years of age and persons with limited physical, sensory or mental abilities or insufficient experience and knowledge, unless they are supervised or have received instructions on how to use the device by a person responsible is for their safety.
- The device must always be on a flat, stable and dry surface.
- Never use the appliance if it is visibly damaged or if there are breaks in the cord.
- In the event of damage to the appliance, the cord or the plug, never carry out repairs yourself. Always have this done by the manufacturer or a qualified technician.
- The device is not suitable for commercial use.
- Always use and store the device in a dry place.
- Never use accessories that are not recommended by the manufacturer.
- This device is only suitable for household use and for the purpose for which it is intended.
Safety in use;
- Always remove the plug from the device when it needs to be maintained or cleaned.
- Never use the device in the vicinity of hot or hot objects.
- Prevent the device from coming into contact with rain.
- Do not place other electrical devices in the device.
- Do not place chemical or explosive agents in the device.
- Only use the DC 12V or 230V connection cable (not included). NOTE: never use both energy sources at the same time.
- Defrost the device regularly to ensure that the device functions optimally.
- Do not pull on the connecting cord, but pull on the plug to remove the cord from the socket.
- If the cool box is connected to the DC socket, disconnect your cool box and other consumers from the battery before you connect a fast charger
- If the cool box is connected to the DC socket; switch off the cool box or break the connection when you switch off the engine. The battery can be discharged otherwise.
- Pay attention! That the heat that arises during the operation of the cool box can be properly dissipated.
- Enough distance between product and objects and walls.
- Never immerse the device in water
- Ventilation slots are not covered at all times.
Use
-
Remove all packaging materials from the device.
-
Place the device on a flat and stable surface with at least 10 cm of free space on each side.
-
Do not switch the appliance on immediately after you transport it, where the cool box has been tilted more than
– 30 °. This could cause damage to the cooling system. The device must first stand upright for 30 minutes so that the coolant can be collected again in the compressor. This prevents the compressor from running dry. -
Look at the above user conditions before use.
-
For hygienic reasons, you must clean the inside and outside of the appliance with a damp cloth before using your cool box. (see paragraph
-
Connect the cooler box.
Handle installation
Control
- Switching on and off: press and hold the on / off button, the refrigerator will now start or switches off
- Temperature adjustment: press the or button to adjust the temperature, The temperature is now set.
- Fast cooling / energy saving mode: press the set button to quickly switch between cooling mode MAX and energy saving mode ECO. Green is Eco and blue is MAX
- Switch C to F: In standby mode, hold down the “ “ and “ “ key for 3 seconds to switch Fahrenheit and Celsius temperature, (F is Fahrenheit temperature, C is Celsius temperature), after releasing the Key 3 seconds automatically save the setting and exit.
- USB charging port: In standby state, press “ “ and “ “ for 3 seconds at the same time to enter the battery protection gear setting menu, and then press “ “ or “ “ to set the corresponding battery protection
Battery power detection
The device features a multi-level battery guard that protects your vehicle
battery from excessive discharge when the device is connected to the built-in
DC power supply. If the cooler is operated with the vehicle ignition off, the
cooler will shut off automatically when the power supply voltage drops below a
set level. The cooler will turn back on once the battery is charged to the
restart voltage level. The compressor will restart automatically in a few
minutes when the voltage returns to normal values.
Note : these values are measured at the input of the control unit and /
or at the DC connection.
- Battery protection function for the cooler with three-class battery protection function, can automatically check the battery voltage of the vehicle, before the electricity consumption will affect the normal functions of the car. The cool box will stop automatically to ensure that the car’s battery does not run out.
- Method for adjusting the battery protection:
Voltage
Protection
| 12V| 24V
---|---|---
Cut off (V)| Cut in (V)| Cut off (V)| Cut in (V)
Low| 9.6V| 10.9V| 21.3V| 22.7V
Middle| 10.4V| 11.7V| 22.8V| 24.2V
High| 11.1V| 12.4V| 24.3V| 25.7V
Tip:
It is recommended to set the H-class when the cool box is connected to a
vehicle, otherwise the car’s battery may be too empty and affect the normal
ignition of the car; When connecting the cool box to an external or backup
battery, it is recommended to set the M-mid range so that the cool box can
work longer.
The meaning of the error code on the screen and how to deal with it:
- E1 Battery voltage is low
- E2 Fan failure
- E3 Compressor start up problems
- E4 Compressor’s running speed fails to reach the requirements
- E5 The model is overheating
- E6 Module fault
- E7 Thermal head fault (open circuit or short circuit)
Cleaning
- Before cleaning, remove the products from the device and remove the plug from the power supply. Only clean with a slightly damp cloth, if necessary a non-aggressive cleaning agent can be used. After cleaning, always dry all wet surfaces with a dry cloth.
- Never use sharp or abrasive products to clean the device.
- Defrost the cool box: frost can settle on the evaporator or inside of the cool box due to humidity, this can reduce the cooling capacity. The cool box must be defrosted in time. As follows
- Take the products out of the cool box
- Switch off the device
- Open the lid
- Sweep up the melt water or drain the melt water through the plug.
Recycling
This product bears the selective sorting symbol for waste electrical and
electronic equipment This means that this product must be handled pursuant to
European Directive (2012/19/EU) in order to be recycled or dismantled to
minimize its impact on the environment. For further information, please
contact your local or regional authorities. Electronic products not included
in the selective sorting process are potentially dangerous for the environment
and human heath due to the presence of hazardous substances.
Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MCCHD 33, MCCHD 45 &
MCCHD 60 applies all basic requirements and other relevant regulations listed
in the European directive for electromagnetic compatibility (2014/30/EU) and
low voltage directive (2014/35/EU). If you require a full declaration of
conformity, you can contact the adress listed on the backside of this manual