mestic MSFO-100 Foldable Solar Panel Owner’s Manual

: June 1, 2024
: mestic

Table of Contents

mestic MSFO-100 Foldable Solar Panel
Features
Technical specifications
FAQ
Read User Manual Online (PDF format)
Download This Manual (PDF format)

mestic MSFO-100 Foldable Solar Panel

Features

USB-A QC 3.0
USB-C PD 45W
LED indicator
Cable (300 cm) with MC4 connector

Technical specifications

MSFO-100 MSFO-150 MSFO-200

Maximum power (Pmax)| 100W| 150W| 200W
Voltage at Pmax (Vmpp)| 19.5V| 19.5V| 19.5V
Current at Pmax (Impp)| 5.13A| 7.69A| 10.26A
Open-circuit voltage (Voc)| 23.4V| 23.4V| 23.4V
Short-circuit current (Isc)| 5.54A| 8.37A| 11.08A

USB-A output

| 5V/3.4A, 9V/2.5A, 12V/2A

max. (QC3.0 24W)

| 5V/3.4A, 9V/2.5A, 12V/2A

max. (QC3.0 24W)

| 5V/3.4A, 9V/2.5A, 12V/2A

max. (QC3.0 24W)

USB-C output

| 5V/3A, 9V/3A, 12V/3A,

15V/3A max. (PD45W)

| 5V/3A, 9V/3A, 12V/3A,

15V/3A max. (PD45W)

| 5V/3A, 9V/3A, 12V/3A,

15V/3A max. (PD45W)

Caution

Do not break, dismantle or drop this product.
Dispose the charger according to local environment laws.
This charger is not completely waterproof. Avoid exposure to water, rain, and moist environments.
Avoid exposure to fire and chemical liquids.

Use

Unzip the charger compartment.
Place all panels under direct sunlight.

Charging your phone/USB device:

Connect your device to the solar charger with a USB-A or USB-C cable.
Keep your device cool and dry while charging. Place it in the charger compartment of the solar panel, or in the shade to avoid overheating.

Charging a power station with the MC4 cable:

Connect the MC4 cable to a MC4 cable suitable for charging your power station.
Keep your power station cool and dry while charging. Place it on a dry and stable underground in the shade.

FAQ

If my device requires an input current of 1A, will the 2A output of the solar charger damage it?
No. The solar panel features intelligent charging, detecting the needs of your device and delivering exactly what it requires. If your phone accepts 1A, the charger will deliver 1A.
What if the solar charger USB port is not charging my devices?
- A. Check the manual of your device to ensure the input voltage is 5V.
- B. Cloudy weather and indirect sunlight may cause fluctuations in the current, hindering or preventing charging. Place the solar charger in direct sunlight or wait for the weather to clear.
- C. Wipe the panels clean with a damp cloth between uses to keep them in good condition. Avoid cleaning the panels with sharp or abrasive objects to prevent scratching.
If it is partially cloudy or shady, will the solar charger still work?
Yes, although the charging efficiency will be low, resulting in a prolonged charging time.
Will this panel charge a power bank?
Yes. Be sure to place the power bank in the charger compartment to avoid direct sunlight or excessive heat.

Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This means that this product must be handled pursuant to European Directive (2012/19/EU) in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human heath due to the presence of hazardous substances.

Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MSFO-100/-150/-200, applies all basic requirements and other relevant regulations listed in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage directive (2014/35/EU). If you require a full declaration of conformity, you can contact the address listed on the backside of this manual.