AEi AMT-8210-SMK Single-Line Analog Cordless Full Duplex Speakerphone User Manual

June 12, 2024
AEi

AEi AMT-8210-SMK Single-Line Analog Cordless Full Duplex Speakerphone

Analog DECT Phone
Model: AMT-8210-SMK / AMT-8110-SMK ASP-8210-SMK / ASP-8110-SMK

Package Contents

Item Description
1. Base Unit Main unit of the phone
2. Cordless Handset Wireless handset for mobility
3. Stand Stand for placing the handset
4. Battery Battery for the cordless handset
5. AC Adaptor Power adapter for the base unit
6. Quick Installation Guide (QIG) This document

When unpacking the phone, ensure all the following items are present and undamaged. If anything appears to be missing or broken, contact your dealer for a replacement.

  1.  Base Unit
  2. Cordless Handset
  3. Stand
  4. Battery
  5. AC Adaptor
  6. Quick Installation Guide (This document)

Product Description

The following contains important information to help you familiarize with the functions of the analog phone.

Front View


Base Unit:

Name Description
1. Message waiting indicator To indicate an incoming call or unread messages
2. Speed dial keys Press to dial the preset number
3. LINE 1 / LINE 2 To indicate the status of the line (idle, pre-dialing, in

call,
in on-hold call)
4. Alphanumerical keys| Enter phone numbers and texts
5. Function keys| HOLD: Put an active call on hold
REDIAL: Call the last number dialed
CONF: Activate three-way conference call
MUTE: Mute a call
SPEAKER: Activate speakerphone for hands-free conversations
MESSAGE: Retrieve voice messages
VOLUME: Increase or decrease the volume of the ringer tone or
speakerphone

Front View – Handset:

Name Description
1. Message waiting indicator To indicate an incoming call or unread messages
2. LINE 1 / LINE 2 To indicate the status of the line (idle, in call, in on-

hold
call)
3. SPEAKER| Activate speakerphone for hands-free conversations
4. Alphanumerical keys| Enter phone numbers and texts
5. Function keys| MESSAGE: Retrieve voice messages
HOLD: Put an active call on hold
VOLUME: Increase or decrease the volume of the ringer tone,
handset, or speakerphone

Back View
Name Description
1. DC 6V Power jack Connects to AC power adapter
2. PSTN line port Connects to PSTN line

Connecting the Phone **

**

Refer to the user manual for detailed illustrations on how to connect the power, install the phone and stand, and install the handset and battery. The following illustration shows how to connect the power.

The following illustration shows how to install the phone and stand.

The following illustration shows how to install the handset and battery.

Operation

Answering a Call:
An incoming call is indicated by a ringing tone and a flashing indicator on both the handset and base units. You can answer the call by either picking up the handset or pressing the Line (Line1/Line2) key on the base or handset. An incoming call is indicated by a ringing tone and a flashing indicator at the top of both handset and base units. You can answer the call by doing one of the followings:

  •  Pick up the handset to answer the call.
  • Press the Line (Line1/Line2) key on the base or handset to answer the call.

Making a Call:
Dialing with the Keypad:

  • Enter the telephone number using the alphanumerical keypad.
  • After entering the number, press the “#” key to force dialing or wait for 4 seconds for the number to be dialed automatically.

Using the Speed dial keys:

  • There are 10 pre-assigned speed dial hotkeys for commonly dialed numbers.
  • To call a number using speed dialing, press the speed dial hotkey that corresponds to the phone number and the call will start automatically.

You can use the 10 pre-assigned speed dial hotkeys, to configure the most commonly dialed numbers. Use the function to dial a number quickly, instead of keying in a complete number.

To call a number using speed dialing, follow the steps below:

  • Press the speed dial hotkey that has been pre-assigned to the phone number and the call will start automatically.

Call Options
While a call is in progress, a number of additional options are available.

Using the Speaker Phone
For hands free operation, you can use the built-in speaker to talk on the phone.

To use the speakerphone, follow the steps below:

  • While talking on the phone, press the SPEAKER key on the phone to enable the Speakerphone function.
  • Press Speaker key again to terminate the call.

Putting a Call on Hold
You may want to put a call on hold temporarily while doing some work or attending to a second incoming or outgoing call. To put a call on hold, do one of the following:

  •  Press the HOLD key on the phone to put the call on hold.
  • When you receive a second call, press the next available LINE key to attend to the new call, and the first call will be put on hold automatically.

Charging the Handset Battery
You would need to charge the handset battery before using the handset.

  •  Install the battery into the handset.
  • Place the handset onto the base unit and base unit will start to charge the handset automatically.
  •  The charging indicator lights up in red during charging progress. The LED goes off after the handset battery is fully charged.

Checking Voice Messages
If the message waiting indicator at top of handset or base unit lights up in red, it indicates that there are one or more new messages in voicemail box.

  • Press the MESSAGE key on the phone to retrieve voice messages.

Support
For technological support, please email to support@aeicommunication.com.

Over view
This phone is a full-feature telephone that provides voice communication. Read this QIG carefully to learn how to operate this product and take advantage of its features.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals