AEi COMMUNICATIONS SKD-1200 VoIP Phone Installation Guide
- October 30, 2023
- AEi COMMUNICATIONS
Table of Contents
SKD-1200 VoIP Phone
Installation Guide
SKD-1200 /SKD-1100 SKD-1203 /SKD-1103 SKD-9200 /SKD-9100 SKD-9203
/SKD-9103
SLN-1200 /SLN-1100 SLN-1203 /SLN-1103 SLN-9200 /SLN-9100 SLN-9203
/SLN-9103
Overview
This phone is a full-feature telephone that provides voice communication. Read this QIG carefully to learn how to operate this product and take advantage of its features.
Package Contents
When unpacking the VoIP phone, ensure all the following items are present and undamaged. If anything appears to be missing or broken, contact your dealer for a replacement.
- Base Unit
- Handset
- Wall mount
- AC Adaptor
- RJ-45 Cable
- Quick Installation Guide (This document)
Product Description
This chapter contains important information to help you familiarize yourself with the functions of the VoIP phone.
Front View
| Name| Description
---|---|---
1| Ring Indicator| A red light indicator means that you have incoming calls.
2| Dialing Pad| Press the buttons to dial a phone number or enter alphabetical
characters.
3| Speed dial Service
Keys| Press any of the keys to speed dial the preset contact number.
4| Hold| Press to put an active call on hold.
5| Redial| Press to call the last number dialed.
6| LINE 1 / LINE 2| There are two LINEs bottom in this IP Phone.
7| Volume control keys| Increases or decrease the volume for the currently
active voice receiver for handset. The volume button also controls the ringer
volume when on hook.
Installation
The following illustration shows how to install the phone and stand.
Operation
Answering a Call
An incoming call is indicated by a ringing tone and a flashing indicator at
the top of both handset and base units. You can answer the call by doing one
of the followings:
- Pick up the handset to answer the call.
Making a Call
Dialing with the Keypad
- Enter the telephone number with the alphanumerical keypad.
- After entering the number you want to call, press the # key to force dialing or wait for 3 seconds before the number is dialed automatically.
Call Options
While a call is in progress, a number of additional options are available.
Putting a Call on Hold
You may want to put a call on hold temporarily while doing some work or
attending to a second incoming or outgoing call. To put a call on hold, do one
of the following:
- Press the HOLD key on the phone to put the call on hold.
- When you receive a second call, press the next available LINE key to attend to the new call, and the first call will be put on hold automatically.
Support
To configure through the web browser, do the following:
- Ensure the phone is powered up and connected to a DCHP network.
- Pick up the handset and then press 1121134, the IP address is announced by the phone.
- Open your browser (such as Chrome, Firefox, etc.) and type in the web address of the phone. For example, http://IP.address.of.thePhone:8000
When the Web login front page is displayed. Enter the user name and the
password and click Login.
The administrator’s user name and password are “admin” and “1234”
respectively.
For technical support, please email to
[email protected]