INVENTUM HW617B / HW617W Retro Waterkoker Kettle Instruction Manual

: June 4, 2024
: INVENTUM

Table of Contents

INVENTUM HW617B / HW617W Retro Waterkoker Kettle Instruction Manual
safety instructions
appliance description
before first use
boiling water
Attention: never switch the kettle on without water.
switching the kettle off
descaling
cleaning & maintenance
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

INVENTUM HW617B / HW617W Retro Waterkoker Kettle Instruction Manual

safety instructions

Please read these instructions before operating the appliance and retain for future use.
The appliance is intended solely for domestic use within the home.
Attention! Avoid touching hot surfaces, especially the outside of the appliance when the appliance is in use.
Attention! In case of overfilling the kettle, it is possible that boiling water is ejected.
Before plugging into a socket, check that the voltage in your home corresponds with the voltage printed on the bottom of the appliance.
Never let the power cord of the appliance hang over the edge of a table or counter, touch hot surfaces or become knotted.
Never place this appliance on or near a hot gas or electric burner or where it could touch a heated oven or microwave oven. Do not allow this appliance to touch curtains, wall coverings, clothing, dishtowels or other flammable materials during use.
Always use the appliance on a secure, dry, level surface.
Never leave the appliance unattended when in use.
Always carry out regular checks of the power cord to ensure no damage is evident. Should there be any signs that the cord is damaged in the slightest degree, the entire appliance should be returned to the
Customer Service Department in order to avoid a hazard.
For your own safety, only use the accessories and spare parts from the manufacturer which are suitable for the appliance.
Always return the appliance after a malfunction, or if it has been damaged in any manner to the Customer Service Department for examination, repair or adjustment as special purpose tools are
required.
Never unplug it from the socket by pulling the cable.
Always ensure that your hands are dry before handling the plug, switch or power cord.
This appliance shall not be used by children from 0 to 8 years. This appliance can be used by children over the age of 8 and above if they are continuously supervised.
This appliance can be used by people with reduced physical, sensory or mental capabilities or lack of experience or knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Keep the appliance and its cord out of reach of children aged less than 8 years.
Cleaning and maintenance shall not be made by children.
Children should be supervised to ensure that they do not play with the appliance.
Unplug the appliance as soon as you have finished using it and when you are cleaning it.
If an extension cord is used, compare the marked electrical rating of the extension cord with the electrical rating on the appliance.
Make sure that it can not be pulled by children or tripped over unintentionally.
Should you decide not to use the appliance anymore, make it inoperative by cutting the power cord after removing the plug from the socket. We also recommend making all potentially dangerous
parts of the appliance harmless, particularly for children who might be tempted to play with them.
Never use the appliance if it is not working properly, or if it has been damaged. Any intervention other than cleaning and normal maintenance by the customer must be carried out by an approved
Service Centre.
Never immerse any part of the main body, power cord and plug into water or any other liquid to protect yourself against electrical hazards.
When the appliance is used for other purposes than intended, or is when it is not handled in accordance with the instruction manual, the full responsibility for any consequences will rest with the user.
Any damages to the product or other things are not covered by the warranty

Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with the symbol indicating
separate collection of such equipment must be returned to a municipal waste collection point.

appliance description

Spout
Lid
Handle
On/ off switch ( 0 – 1 )
Pilot lamp
Base
Water level-indicator

before first use

Before you use the appliance for the first time, please do s follows: Carefully unpack the appliance and remove all the packaging material. Keep the material (plastic bags and cardboard) out of reach of children. Check the appliance after unpacking for any damage, possible from transportation. Place the appliance on a stable and heat resistant surface.
The minimum amount of water must be 0.5 litres. The maximum amount of water to be used is 1.7 litres.
Before use you must fill the waterkettle to the maximum level and boil this amount. Do this twice. Throw away the boiled water and rinse the kettle with cold water. The appliance is now ready to use.
The kettle is only suitable for boiling water. Never fill the kettle with milk, tea, coffee or others drinks.

boiling water

Before plugging into a socket, check that the voltage in your home corresponds with the voltage printed on the bottom of the appliance. Put the appliance on a cool, flat and stable surface. Connect the appliance to an earthed socket. You can adjust the length of the cord by pulling it out from, or pushing it into, the interior of the appliance.

Open the lid. Please firmly hold the kettle when pulling the lid off.
Fill the kettle with an amount of water and place the lid back.
Place the kettle on the base and make sure that the plug is in the socket.
Switch the kettle on by pressing the on/off switch down to position 1.
The pilot lamp will light up. The kettle will now boil the water.
The kettle will automatically switch off (0) when the water is boiled. The pilot lamp will switch off.

Attention: never switch the kettle on without water.

If, for whatever reason, the kettle is switched on without water, the dry- boilprotection will automatically switch the kettle off. Put the switch back up. In this case take the kettle from the base and let it cool down for several minutes. After that, refill the kettle and switch it on again. Make sure that the lid is closed properly, if not the kettle will go on boiling and will not automatically switch off.

switching the kettle off

The kettle will automatically switch off when the water is boiled and the pilot lamp will switch off. If you want to boil the water again, you must wait approx. 30 seconds before you switch it on again, so that the switch can cool down. Thekettle can also be switched off at any time with the switch.
When you take the waterkettle off the base while boiling, it will switch off. When you place the waterkettle back on the base, you must again wait approx. 30 seconds to let the switch cool down before you can switch it back on.
Attention! It may occur that you see condensation on the base. This is completely normal and has no consequences for the use of the waterkettle

descaling

Scale can form on the inside of the waterkettle. We advise to descale the waterkettle from time to time. Use a suitable descalingproduct for waterkettles/ coffeemachines and follow the instructions.
You can also descale the waterkettle with lemonjuice. The acid in this juice will remove the scale. This natural method avoids the use of chemicals. Fill the waterkettle half-full with warm water. Add the juice of half a lemon. Boil the water and leave it to cool for half an hour. Throw away the boiled water and rinse the waterkettle to remove any remainders. Fill the waterkettle with fresh water and boil it again. Throw away the water and rinse the kettle once more. Never clean the appliance with detergents. These products can damage your waterkettle.
To remove the anti-scalefilter for cleaning, take the waterkettle of the base and let it cool down. Do not remove the anti-scalefilter when the waterkettle is still warm and/ or filled with water. Pull the anti-scalefilter straight back out of the spout and clean it with warm water. Make sure while replacing the filter to place it correctly in the spout. Place the point of the anti- scale filter first at the bottom and then push the filter back in place towards the spout.
Never place the anti-scalefilter loose in the waterkettle.

cleaning & maintenance

Clean the waterkettle on regular bases for continues performance. Never immerse the waterkettle, the base or the plug in water or others liquids. Let the waterkettle cool off and always unplug the appliance before cleaning. Wipe the outside of the waterkettle with a damp cloth and dry the kettle afterwards. Never use any abrasives!