SoundCore Soundcore Boost Gen 2 Portable Speaker A3145013 User Manual
- June 13, 2024
- Soundcore
Table of Contents
- SoundCore Soundcore Boost Gen 2 Portable Speaker A3145013
- Charging your Soundcore Boost
- Powering On/Off
- Bluetooth Pairing
- Button Controls
- TWS (True Wireless Stereo) Mode
- NFC Pairing
- Charging USB Devices
- APP
- Specifications
- DOWNLOAD
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SoundCore Soundcore Boost Gen 2 Portable Speaker A3145013
USER MANUAL
Charging your Soundcore Boost
- To preserve battery lifespan, fully charge at least once every 45 days.
- To prevent damage, use the provided USB-C cable.
Powering On/Off
Press the power button to power on or off.
Bluetooth Pairing
- Press and hold the power button more than 4 seconds to disconnect the currently connected device and re-enter the pairing mode.
- When powered on, your Soundcore speaker will automatically connect to the last successfully connected device if available.
- The Soundcore speaker will automatically power off 10 minutes after Bluetooth is disconnected.
Button Controls
TWS (True Wireless Stereo) Mode
Two identical Soundcore speakers (A3145) can pair with each other for stereo sound.
1. On both Soundcore speakers, press the TWS button to enter TWS pairing
mode.
2. In TWS mode, connect either speaker with your Bluetooth enabled device.
The two speakers can play music as the left channel and right channel.
To exit the stereo mode, press the TWS button again on either speaker.
NFC Pairing
- To break the connection, tap your NFC device again onto the NFC detection area of your Soundcore speaker.
Charging USB Devices
This Soundcore speaker can charge your USB devices with its built-in battery.
APP
Download the Soundcore App for enhanced product experience.
- Check product information
- Customize EQ settings
- Show battery status
- Adjust the volume
- Set Auto Power Off
- Firmware update
Specifications
Specifications are subject to change without notice.
| Input (USB Type-C) | 5 V 2 A |
|---|---|
| Output (USB Type-A) | 5 V 1 A |
| Audio output | 10 W × 2 |
| Driver size | 1.75” x 2 |
| Frequency response | 20 Hz – 20 kHz |
| Impedance | 16 |
| Battery capacity | 5200 mAh |
| Charging time | 4-6 hours |
| Playtime (varies by volume level and content) | 12 hours |
| Waterproof level | IXP7 |
| Bluetooth version | V5.0 |
| Bluetooth range | 20 m / 66 ft |
DOWNLOAD
SoundCore Soundcore Boost Gen 2 Portable Speaker A3145013 User Manual – [Download PDF]
SoundCore Soundcore Boost Gen 2 Portable Speaker A3145013 QSC – [Download PDF]
A3145 Soundcore Boost Declaration of Conformity – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>