TOZO T13187 Open Buds Wireless Headphones User Manual

TOZO T13187 Open Buds Wireless Headphones

Thanks for purchasing
The earphone provides you with the extraordinary experience of stable voice call and peaceful music sound in noisy surrounding with fashionable appearance and multiple functions. making them a great choice for you while working going out and driving.

Specifications

• Speaker Size: Ф 14.2mm
• Charging Time: ≤2H
• FR Range: 20Hz-20KHz
• Impedance: 162+15%
• Transmission Range: ≥10M
• Earphone Battery Capacity: 70mAh
• Charging Case Battery Capacity: 650mAh
• Charging Parameters: 5V=1A
• Product Size And Weigh: 935828mm; 78g

Product List

Functions

Power on/off
Power on:

1. The earphones are in the charging case, and opening the charging case will power on the earphones.
2. With the earphones outside the charging case (in the off state), touch the left and right earphones respectively for 3 seconds to turn them on, and they can also be used individually.

Power off:

1. Place the left and right earphones into the charging case and close the charging case lid to power off the earphones.
2. With the earphones outside the charging case (in the on state), touch the left and right earphones respectively for 3 seconds to turn them off. When the left and right earphones are connected to each other, if you touch either earphone to turn off the power, both the left and right earphones will turn off.

Wearing

1. The earphone ear hook can rotate forward and backward, as well as left and right.
   The touch area is shown in the picture.

2. Adjust the curved part of the rotating earphone to adjust forward, backward, left, and right. Then wear it on the left and right ears respectively, and adjust the earphone’s sound outlet to align with the ear canal.

Bluetooth connection

1. Connection inside the charging case: Open the charging case and the red and white signal lights will flash alternately. Search for the signal [TOZO Open Buds] and connect to it.
2. Connection outside the charging case: Touch the left and right earphones for 3 seconds to turn them on, and then search for the signal (TOZO Open Buds] to connect to it. You can also choose to connect only one earphone for use.
3. After a successful connection, the signal light on the earphones will go off.

Reset
When the earphones are placed in the charging case, press and hold the charging case button for 8 seconds to clear the Bluetooth pairing records and restore the factory settings.

Music Control
Calling Control
Voice Assitant

Bluetooth multipoint feature

1. With the earphones turned on, put them in pairing mode and connect them to the first phone via Bluetooth.
2. Turn off Bluetooth on the first phone and put the earphones back in pairing, connect the earphones to the second phone via Bluetooth.
3. Turn on Bluetooth on the first phone and search for the earphones in the list of paired devices.
   Click on the earphones to connect to both phones simultaneously.

Charging methods

1. Earphone charging: Simply place the earphones into the charging case to charge them.
2. Charging case charging: It is recommended to use a 5V output charger to charge the charging case.
   Insert the Type-C charging cable into the charging port of the charging case to charge it.

TOZO APP

Download the TOZO App for UI customization, EQ settings and more.

• Ul customization: Most of the controls can be customized in the App.
  EQ settings: There’re lots of EQ settings you can choose in the Appto optimize your experience while enjoying different music genres.

• Earbuds firmware update: The earbuds firmware can be updatedin the App. You will be informed once the new version of firmware is detected when you connect the earbuds with the App.

TOZO APP pairing

• Step 1:
  Download the TOZO App on vour phone.

• Step 2:
  Bluetooth pairing with your earphone.

• Step 3:
  TOZO App pairing with your earphone.

Troubleshooting and reminders

1. Cannot turn on: Trying to charge the earphones and charging case, check whether the charging case’s red light is on before attempting to turn them on.
2. Water damage: Do not charge the product, and immediately turn it off, wipe off any surface water to let it dry, and then try to use it again.
3. Playback or connection issues: Put the earphones in the charging case, press and hold the charging case button for 10 seconds to restore factory settings, and then try to use them again.
4. Unable to connect to phone: Make sure Bluetooth is turned on, delete the pairing, turn on the earphones, and search for the earphones’ Bluetooth signal to connect. If it still does not work, try restoring factory settings.
5. No sound: Ensure that Bluetooth is connected S and try increasing the earphone volume.
6. Unable to charge: Try using a different 5V power adapter to charge or replace the charging cable O see if it solves the problem.
7. If the problem persists: Please contact TOO customer service.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment genera uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions.

1. This device may not cause harmful interference and
2. this device must accept and interference received including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
IC Caution:
Radio Standards Specification RSS-Gen, issue 5
This device contains lIcence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.
RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>