PHILIPS Hue A19 10 Watts LED Smart Bulb User Manual

June 12, 2024
Philips

Hue A19 10 Watts LED Smart Bulb
User ManualPHILIPS Hue A19 10 Watts LED Smart
Bulb

Hue A19 10 Watts LED Smart Bulb

PHILIPS Hue A19 10 Watts LED Smart Bulb - fig

|
---|---
www.philips-hue.com/support|

<http://www.philips-hue.com/support>  

To connect your new Hue white bulb, select the installation instruction (A or B) that is applicable to you.
For more information on installation and use, please visit www.meethue.com.

A If you have a Hue bridge

  1. Power your Hue white and turn on your wall light switch
  2. Start the Hue app and follow the instructions

PHILIPS Hue A19 10 Watts LED Smart Bulb - Hue bridge

B If you have a Hue wireless dimming kit

  1. Power your Hue white and turn on your wall light switch
  2. Hold the Hue dimmer switch close to the light, press and hold the “ON” button for 10 secondsPHILIPS Hue A19 10 Watts LED Smart Bulb - dimming kit
  3. Release the “ON” button after the light has flashed 3 timesPHILIPS Hue A19 10 Watts LED Smart Bulb - dimming kit1

Please go to www.meethue.com to learn more about Hue and how to use it
FCC ID Hue white A19 lamp: 03M9290002761X
This device complies with Part 15 of the FCC Rules and with RSS- 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any  interference received, including interference that may cause undesired operation.
IC Certification:

  • Hue white A19 lamp LED lamp: Company number 10469A, UPN 2761X

This Class B digital apparatus complies with Canadian ICES-003
This digital apparatus does not exceed the class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications
NOTICE: Changes or modifications made to this device not expressly approved by Philips Lighting North America Corporation (philips”) may void the US. FCC and Canadian authorization to operate this device.
The advanced interface module complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee  that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna
  • Increase the separation between the device and receiver
  • Connect the device into an outlet on a circuit different from that to which the receiver is connected
  • Consult the dealer or an experienced radio/television technician for help

WARNINGS AND CAUTIONS:

  • The bulb is suitable for use in open luminaries (fixtures)
  • The bulb is not suitable for totally enclosed fixtures
  • The bulb is not intended for use with emergency exit fixtures or emergency lights.
  • The bulb is not compatible with photo controls, occupancy sensors, or timing devices unless specifically designed for Hue.
  • The bulb is not suitable for use with legacy dimmers
  • Risk of electric shock -Do not use device where directly exposed to water.
  • Before replacing, turn off power and let the bulb cool to avoid electrical shock or burn
  • The device is for indoor use only.
  • Do not use the device in wet locations, e.g. bathrooms or outdoors

OPERATING INSTRUCTIONS:

  • This device is not a toy designed to be played with by children.
  • Do not place the device on hot surfaces.
  • For safety reasons, do not open device, which will also void the warranty
  • Use the bulb only in a socket rated for this bulb

LIMITED WARRANTY:

Philips warrants that this device will be free from defects in material and workmanship and will operate for 2 years based on up to 3 hours average usage per day/7 days per week, when used as directed. If this device does not conform to  he warranty, Philips will send you, at its election, a replacement device or refund your original purchase price upon receipt of the returned device, register receipt and proof of purchase. Please call our toll- free number 1-800-555-0050,  write to Philips (address indicated on the packaging) or send an email at the website www.philips.com to find out how to return the device. This limited warranty does not cover devices subject to accident, neglect, abuse, misuse or acts of
God. REPLACEMENT OR REFUND IS YOUR SOLE REMEDY EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS  WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED Some states and provinces do not allow exclusion of incidental or consequential damages, so the above [imitation or exclusion may not apply to you This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and province to province

CLEANING AND MAINTENANCE:

Do not clean the device when it is on and connected to the power supply.
To avoid scratching the device, clean only with a soft dry cloth.
Do not use cleaning agents to clean the device.
Manage in accordance with disposal laws in your area Hue Personal Wireless Lighting” is a trademark owned by Koninklijke Philips N.V
Wireless Specification:
Wireless RF mode frequency band: 2400~2483.5 MHz
Wireless communications protocol: IEEE 802.15.4
Operating channels: channels 11 – 26
Environmental specification:
Temperature (operation): -10..45C
Temperature (Storage): -25-60 C
Relative humidity: 5-95 % non condensing
Standby power. <0.5W per lamp

Signify North America Corporation
400 Crossing Blvd, Suite 600
Bridgewater, NJ 08807, USA
Signify Canada Ltd.
281 Hillmount Road,
Markham, ON, Canada L6C 2S3
Questions or Comments  :
1-800-555-0050
www.philips-hue.com
Importado y/o distribuido en México por:
Signify Mexico S.A. de C.V.
Av. La Palma N° 6-Col. San Fernando,
La Herradura Huixquilucan
Edo. De México, C.P. 52784 – R.F.C. PME-620620-E84
Centro de contacto :
01-800-508-9000
© 2022 Signify Holding
All rights reserved
3222 639 07432
Last update: 04/2022

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals