SmallRig 2924B Encore Wireless Remote Controller Owner’s Manual
- June 12, 2024
- SmallRig
Table of Contents
SmallRig 2924B Encore Wireless Remote Controller
Product Information
The product is the SmallRig Encore Wireless Remote Controller. It is designed to be compatible with Android 11/12/13 OS or newer, as well as IOS 16 or newer. The device complies with Part 15 of the FCC Rules. The manufacturer of the product is Shenzhen Leqi Network Technology Co., Ltd. It is made in China and can be purchased from UK CROSSBORDER LIMITED located at 7 Bell Yard London WC2A 2JR, UK.
Product Usage Instructions
- Read the user manual carefully and keep it for future reference.
- Ensure that the product is used under the specific working conditions mentioned in the user manual.
- Do not disassemble the product. If you have any questions or issues, contact the seller for after-sales service.
- Check the battery every 6 months and ensure it has approximately 60% charge. Replace the battery if necessary.
- If the product is damaged or will never be used, dispose of it according to waste management measures. Do not discard the battery; dispose of the entire product.
- Do not violate the warnings and intended use mentioned in the user manual to avoid defects that are not covered by the warranty.
Please note that this response provides general information and usage instructions. For specific instructions or troubleshooting, refer to the detailed user manual or contact the manufacturer directly.
In order to ensure user’s safety and prevent the product damages caused by any improper use, please carefully read the “Warnings” below and properly keep this User Manual for future reference.
Foreword
Thank you for purchasing SmallRig’s product.
Warnings
- Please read this User Manual carefully.
- Do not use the product in water.
- Do not let the product fall to the ground, be hit or suffer violent impact.
- Do not use the product in the completely closed environment, or it may lead to rise of internal temperature, which causes product failure, ignition or other accident.
- Never remove the non-detachable lithium battery without permission.
- When the battery is not in use for a long time, please charge and discharge the battery each 6-month, and provide it with approximately 60% of the electric quantity to prolong its use life.
- Since there are some hazardous substances in the battery, please do not discard it. Instead, dispose of the product that is damaged or will never be used according to the waste management measures.
Intended Use
- Please read this User Manual carefully, especially the “Warnings”.
- Please use or store the product in the environment mentioned herein.
- It will be regarded as an improper use when the users are not correctly follow the user manual or use the product under the specific working condition.
Please do not disassemble the product. If you have any question, please contact the seller to apply after-sales service.
Product illustration
Specifications
Battery
How To Use
-
Paring
- a. Turn on the shutter by switching the on/off button, the shutter will enter into pairing mode and the indicator LED starts flashing quickly at the same time.
- b. Actiave the function on your phone and sourcing the devices around
- c. Select the device of “AB Shutter3 ” from the list and paring will be finished automatically in few seconds.
-
Select APP
Use the inbuilt camera APP to take photos via Shutter or you can download the APP of “camera 360” from Google play if in built camera cannot be supported, check the compatible device and APP in the following instruction.
-
Shooting
Select a correct APP and press the proper button on the shutter for lOS and Android phones to taking the photos. -
Compatible devices
Compatible with Android 11/12/13 OS or newer, IOS 16 or newer.
Service Warranty
Please keep your original receipt and guarantee card. Be sure the dealer has written on it the date of purchase and SN of the product. These are required for warranty service.
After-sale warranty terms
- 7 Days DOA Return Policy: Within 7 days from the date of the package receipt,return or replacement can be done if the item received is malfunctioning or physical damaged (not caused by human abused), return shipping cost will be on SmallRig’s charge.
- 1-Year Warranty: Within 1-year from the date of the package receipt, defective product which is not caused by human abused is eligible to get repair / replacement for free; defective product which is caused by human, repair / replacement will be charged based on the damage level. In the event that the minimum warranty period stipulated by the laws of sales destination is longer than one year, such minimum warranty period shall prevail.
This warranty does not cover
- Defect caused by users’ violation of the “Warnings” and “Intended Use”.
- The product identification or SN label is removed or defaced in any way.
- The product is serviced or repaired by any one other than our company orthe service agency authorized by our company.
FCC
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipmet has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
- reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet in a different circuit than the receiver is connected to.
- Consult the dealer or an experienced radio/TV technician for help.
RF Warning Statement
This device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure condition without restriction.
Guarantee Card
- Serial No.: __
- Item Name: __
- Purchase Date: __
- User Name: __
- Mobile: __
- Address: __
- Receipt: __
Kingstar Technologie GmbH
Rudolf-Diesel-Straße 5, 65760 Eschborn, Deutschland
euar@ikingstar.de
UK CROSSBORDER LIMITED
7 Bell Yard London WC2A 2JR,UK United Kingdom
uk-crossborder@outlook.com
Manufacturer: Shenzhen Leqi Network Technology Co., Ltd.
Add: Rooms 103, 501 and 601, Building 5, Fenghe Industrial Park, Nos.
1301-50 Guanguang Road, Longhua District, Shenzhen, Guangdong, China.
www.smallrig.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>