WINEGARD 2452469 Extreme 2.0 Outdoor WiFi Extender User Guide

WINEGARD 2452469 Extreme 2.0 Outdoor WiFi Extender

Product Information
The Extreme WiFi Extender is a device designed to boost and extend the range of your wireless network. It comes with a power inserter and requires an Ethernet cable for installation. The unit is weatherproof and should be installed correctly to ensure optimal performance.

Product Usage Instructions

1. Outside Installation: Assemble and install the Extreme WiFi extender. Make sure not to install it upside down. Ensure that the gasket is firmly seated in the cover plate to maintain weatherproofing.
2. Inside Installation: Connect the Ethernet cable to the power inserter’s POE port. Then, plug the power inserter into a power source. Note that the power inserter should only be installed indoors.
3. Perform Setup: Follow the instructions on the back of the unit for setup.
4. Scan for Wireless Networks: Use a WiFi-enabled device (tablet, smartphone, or laptop) to scan for wireless networks. To speed up installation, disable Auto-Join (Apple) or Auto-Connect (Android) on the WiFi service you want to join.
5. Select SSID and Connect: Choose the SSID (network name) provided on the label below the unit. Connect to it using the password also mentioned on the label. Allow up to two minutes for the SSID to appear as an available selection.
6. Open Internet Browser: Once connected to the WiFi extender, open an internet browser and enter “10.11.12.1” into the address bar. Press Enter. Use the following login information: Username: admin, Password: admin.
7. Scan for WiFi: Click on the “Scan for WiFi” option. Select the desired 2.4 GHz Local Network from the available options. It is recommended to choose a network with a signal strength above 50%.
8. Continue and Reconnect: Click “Continue” and enter the network password if prompted. The unit will reboot, and you may need to reconnect to the internet. Once connected (which may take up to two minutes), the strength of your connection will be displayed under WiFi Signal.
9. Ready for Expanded Internet: Your Extreme WiFi extender is now ready to provide an extended internet connection. For additional features and settings, refer to the complete manual available on the manufacturer’s website. The manual covers topics such as setting up access point wired mode or bridge mode, changing passwords or SSID, enabling a 5GHz network, and more. Setup videos are also available on the website.

For any further assistance or troubleshooting, please refer to the complete manual or contact Winegard Company at the given address.

INSTALLATION

Not provided: 7/16″ wrench, Phillips-head screwdriver, Ethernet cable (max 85′), and hardware to mount foot

1. OUTSIDE Assemble and install an Extreme WiFi extender (a-c).
   WARNING : Do not install an extender upside down.
   NOTICE: The gasket must be firmly seated in a cover plate to ensure the unit is weatherproof (c).

2. INSIDE Connect the Ethernet cable to the power inserter (POE port) and plug it into power (d).
   WARNING : Install power inserter inside only.

3. PERFORM SETUP Instructions on the back.

SETUP

1. SCAN for wireless networks using a WiFi-enabled device (tablet, smartphone, or laptop). To speed up installation, turn off Auto-Join (Apple) or Auto-Connect (Android) on the WiFi service you intend to join.

2. SELECT SSID and connect with the password on the label below. Allow up to two minutes for the SSID to appear as an available selection.

3. OPEN an internet browser once connected, and type 10.11.12.1 into the address bar. Press Enter. Login information Username: admin Password: admin Click Scan for WiFi. Select desired 2.4 GHz Local Network.
   Signal strength below 50% is not recommended. Click Continue. Enter network password if prompted. The unit will reboot and you may need to reconnect to the internet. Once connected (takes up to two minutes), the strength of your connection will appear under WiFi Signal.

4. READY for expanded internet! Check out the complete manual on our website for additional features. It covers setting up access point wired mode or bridge mode, changing your password or SSID, enabling a 5GHz network, and more. Setup videos are also available on our website.

For more product details, including the full manual (English, Français, Español), warranty, and videos, visit Winegard’s website.
Winegard Company 2736 Mt. Pleasant St. | Burlington, IA 52601 Printed in U.S.A. © 2021 Winegard Company

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>