mestic MG-135 Grill or Griddle Instructions

June 12, 2024
mestic

mestic MG-135 Grill or Griddle

mestic-MG-135-Gril-Griddle-product

Product Information

Language Product Name Components
Nederlands Grill MG-135 1. Bamboe basis

2. Grillen
3. Vet opvangbak
4. Thermostaatknop
5. Indicatielampje
English| Grill MG-135| 1. Bamboo base
2. Grill
3. Grease tray
4. Thermostat knob
5. Indicator light
Deutsch| Grill MG-135| 1. Bambussockel
2. Grillen
3. Fettauffangschale
4. Thermostatknopf
5. Kontrollleuchte
Dansk| Grill MG-135| 1. Bambu bas
2. Grill
3. Fettbricka
4. Termostatvred
5. Indikatorlampa
Italiano| Grill MG-135| 1. Bambu base
2. Grill
3. Fettbricka
4. Termostatvred
5. Indikatorlampa
Norsk| Grill MG-135| 1. Bambu bas
2. Grill
3. Fettbricka
4. Termostatvred
5. Indikatorlampa
Svenska| Grill MG-135| 1. Bambu bas
2. Grill
3. Fettbricka
4. Termostatvred
5. Indikatorlampa

Product Usage Instructions

  1. Gently grease the grill plates with butter, margarine, or cooking fat.
  2. Select the desired temperature using the thermostat knob.
  3. Avoid using sharp objects on the grill to prevent damage to the non-stick coating.
  4. After cooking, unplug the appliance and allow it to cool down by opening it.

Note: It is recommended to preheat the grill for at least 5 minutes and wait for the temperature indicator light to turn off before placing food on the grill. When the appliance is first used, it may produce a slight odor, which is normal and
temporary. It is also advisable to use a heat-resistant layer between the appliance and a table. Place the appliance in a well-ventilated area.

  1. Bamboo base
  2. Grill
  3. Grease tray
  4. Thermostat knob
  5. Indicator light

Important Safety Instructions

  1. Before using this electrical appliance, please read the instructions below carefully and keep the user manual for future reference.
  2. Before connecting the appliance to a wall outlet, check that the local electrical power matches the one specified on the appliance’s data plate. Always plug the device into a grounded outlet.
  3. Only use the appropriate connector for this device.
  4. Disconnect the power cable from the mains as soon as you stop using it and before any operation regarding cleaning, maintenance and installation of accessories.
  5. Never leave the machine unattended when it is on.
  6. Do not put the appliance, the power cable or the plug in water or any other liquid.
  7. Do not put the cable in contact with the hot surfaces of the appliance.
  8. Never move the appliance by pulling the cord. Make sure that the cord cannot become entangled in anything.
  9. Never use the appliance if it is visibly damaged or if the cord is broken.
  10. If the mains cord is defective or damaged, it must be replaced by the manufacturer, the customer service agent or by similarly qualified persons in order to avoid danger.
  11. Do not use outdoors..
  12. The temperature of accessible surfaces may be high when the appliance is operating. Beware of the risk of burns.
  13. This appliance is not intended to be operated by means of an external timer or a separate remote control system.
  14. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  15. Children should not play with the appliance.
  16. Cleaning and user maintenance should not be carried out by children unless they are older than 8 years and they are being monitored.
  17. Keep the appliance and its cord out of reach of children ages less than 8 years.
  18. Use the device only for its intended purpose.
  19. Details to clean surfaces in contact with food are contained in the paragraph “CLEANING AND MAINTENANCE”.

INSTALLATION

  1. Before first use, wipe the plates with a clean cloth.
  2. Install the device on a horizontal and stable work surface.
  3. Position the grease drip tray into the slot provided for this purpose.
  4. Make sure you have one outlet nearby so that the cable is neither stretched nor in a zone of passage.
  5. Plug in the supplied thermostat.
  6. Plug the power cord into the socket.
  7. Turn the thermostat clockwise to the highest setting. The indicator light will now turn on.
  8. Preheat for at least 5 minutes and wait until the temperature indicator light turns off, before placing any food onto the grill.
  9. When the device is turned on for the first time, it will produce a light odour. This is normal and temporary.
  10. Using a heat-resistant layer between the device and a table is advised.
  11. Place the device in a well-ventilated space

USE

  1. Grease the plates with butter, margarine or cooking fat.
  2. Select the desired temperature with the thermostat knob.
  3. Never use sharp objects on the grill, this will damage the non-stick coating.
  4. Once you have finished cooking, disconnect the plug from the wall socket and let the appliance open for it to cool down.

MAINTENANCE AND CLEANING
In any event, unplug and let the appliance cool down before cleaning.

  1. Reminder: do not immerse the appliance in water or any other liquid. Do not place the appliance in the dishwasher..
  2. Do not use tools or abrasive solutions that would damage the coating of trays. You can use a wooden kitchen utensil or paper towel to remove most of the dirt..
  3. After each use, empty the fat collecting tray and clean it with warm water and soap.
  4. Clean the trays with a slightly damp sponge, or equivalent, and wash up the liquid..
  5. Wipe the outside of the appliance with a damp cloth only.
  6. Allow the device to dry after cleaning. Do not connect it if it is not dry.

Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This means that this product must be handled pursuant to European Directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human heath due to the presence of hazardous substances.

Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MG-135, applies all basic requirements and other relevant regulations listed in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage directive (2014/35/EU). If you require a full declaration of conformity, you can contact the address listed on the backside of this manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals