mestic MKT-200 Cooker Instruction Manual
- June 12, 2024
- mestic
Table of Contents
mestic MKT-200 Cooker
Product Information
- Product Name: Cooker MKT-200 white
- Includes: 1 x 15 cm burner, 1 x 18 cm burner
- Power Output: 2500 W
- Power Supply: 220-240 V
- Weight: 3.2 kg
Product Usage Instructions
- Before first use, read and follow all instructions in the user manual for proper use and maintenance.
- Keep the user manual handy for future reference.
- Pay special attention to the important safety instructions for your safety and service.
- Record the complete model number (found on the appliance’s nameplate) and the date of receipt. Attach this information along with your purchase receipt for warranty and service purposes.
- Note that the device classification (as indicated on the appliance’s nameplate) is based on specific load tests. Normal use or use of other recommended accessories may significantly reduce power consumption.
- Important Safety Instructions:
- Read all instructions carefully before using the appliance.
- To reduce the risk of fire, electric shock, or injury to persons or property, do the following:
- Always use the appliance with a power source that has the same voltage, frequency, and rating as indicated on the appliance’s nameplate.
- Supervise closely when children or disabled persons are using or near the appliance. Do not allow children to use the appliance as a toy.
- Do not use the appliance if the cord or plug is damaged, if it is not functioning properly, or if it has been dropped or otherwise damaged. Return the complete appliance to the place of purchase for inspection, repair, or replacement.
- To reduce the risk of electric shock, do not immerse or expose the appliance to rain, moisture, or other liquids unless necessary for proper operation.
- Do not use the appliance near water sources such as bathtubs, sinks, swimming pools, etc., where there is a risk of immersion or splashing water.
- Do not use the appliance or any part of it on or near hot surfaces (e.g., gas or electric burner, hot stove, or heated oven).
- Turn off the appliance and unplug it when not in use, before assembly or disassembly, or before cleaning. Remove the appliance by pulling the plug; do not pull the cord.
- Avoid contact between the appliance and hot surfaces.
- Use the appliance only for its intended purpose.
- Do not leave the appliance unattended when it is turned on.
BEFORE FIRST USE
Read and follow all the instructions in this “Use and Care” manual, even if
you feel you are familiar with the product, and find a place to keep it handy
for future reference. Your attention is drawn particularly to the sections
concerning “IMPORTANT SAFEGUARDS”, “FOR YOUR SAFETY” and “SERVICE”. For your
convenience, record the complete model number (located on the product
identification plate) and the date you received the product, together with
your purchase receipt, and attach these to the warranty and service
information. Retain in the event that warranty service is required.
NOTE: The rating of this product (as marked on the product identification
plate) is based on specific loading tests. Normal use or the use of other
recommended attachments may draw significantly less power.
IMPORTANT SAFEGUARDS
When using any electrically powered product, basic safety precautions should
always be followed, including the following:
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT.
WARNING : to reduce the risk of fire, electrical shock or injury to
persons or property:
- Always operate the product from a power source of the same voltage, frequency and rating as indicated on the product identification plate.
- Close supervision is necessary when the product is used by or near children or invalids.
- Do not allow children to use it as a toy.
- Do not operate any product with a damaged cord or plug, or after the product malfunctions, or is dropped or damaged in any manner. Return the complete product to the place of purchase for inspection, repair or replacement.
- To reduce the risk of electric shock, do not immerse or expose the product or flexible cord to rain, moisture or any liquid other than those necessary for correct operation of the product.
- This product should not be used in the immediate vicinity of water, such as bathtub, washbowls, swimming pool etc, where there is a likelihood of immersion or splashing.
- Do not operate or place any part of this product on or near any hot surfaces (such as a gas or electric burner or hot plate or in a heated oven).
- Switch off and unplug it from outlet when not in use, before assembling or disassembling parts, and before cleaning. Remove it by grasping the plug; do not pull on the cord.
- Avoid coming in contact with the hot surfaces.
- Do not use the appliance for other than its intended use.
- Do not leave the appliance unattended when switched on.
- The use of attachments or accessories that are not recommended or sold by the product distributor may cause personal or property hazards or injuries.
- This product is intended for normal domestic /household use only.
READ AND SAVE THESE INSTRUCTIONS
HOW TO USE YOUR HOT PLATE
Before using your Hot Plate for the first time, turn the Hot Plate on the
highest setting for 3 to 5 minutes to condition the protective coating. This
should be the only time the Hot Plate is turned on without a cooking utensil
on it. For the most efficient operation of your Hot Plate, the cooking
utensils used should have a solid base and be as even as possible, and with a
diameter of approx. 15 to 17 cm and a maximum capacity of 1L (800W hot plate).
The cooking utensils with base diameter smaller than the diameter of the Hot
Plate should not be used. Cooking utensils, regardless of their size, should
not project beyond the Hot Plate or intrude into the area within the close
proximity of the controls. Utensils with convex, concave or uneven bottoms
should not be used.
Operation of controls
Turn the controls to the marked, recommended position to attain the desired
temperature. Use this guide as a reference.
Important: when not in use, always turn the controls to the “OFF”
position and disconnect from the power outlet.
- For simmering of delicate foods, and to thicken the sauces, etc.
- For simmering large quantities
- Shallow frying of meat and pan dishes
- To bring all dishes to rapid heat
- To bring all dishes to a boil.
Note: the lamp will go off when the hot plate reaches the selected temperature, and will cycle on and off to maintain the temperature.
For your safety
When using your hot plate, basic safety precautions should always be followed, including the following:
- Never immerse the hot plate in water or any other liquid.
- Oil and fat being heated are not to be left unattended without adult supervision.
- Do not touch the surfaces or the hot plate when in operation, as they get hot.
- The hot plate is designed only for the heating and cooking of food, and must only be used with cooking utensils placed on it.
- The hot plate must be turn to “OFF” setting and be disconnected from the power outlet when not in use.
- Cooking utensils, regardless of their size, should not project beyond the hot plate or intrude into the area within the close proximity of the controls.
- It is dangerous to operate any electrical product with a damaged cord or plug, or after the product malfunctions or is dropped or damaged in any manner. Return the complete product to the place of purchase for inspection and repair.
How to take care of your hot plate
- Disconnect the hot plate from the power outlet.
- Do not immerse the hot plate in any liquid.
- Do not allow the cord to touch any hot surfaces of the hot plate.
- Clean the painted surface with a damp soft cloth and mild household cleaning powder.
- Baked on marks on the circular hot plate can be removed with a household cleaning powder. Turn the unit on for a moment to dry after cleaning.
- Commercially available hot plate cleaners are recommended to preserve the natural finish of the hot plate.
Read and save these instructions carefully.
- Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This means that this product must be handled pursuant to European Directive 2021/19/EU in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human heath due to the presence of hazardous substances.
Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MKT-200, applies all
basic requirements and other relevant regulations listed in the European
directive for electromagnetic compatibility (2014/30/EU) and low voltage
directive (2014/35/EU). If you require a full declaration of conformity, you
can contact the adress listed on the backside of this manual
Importer:
Gimeg Nederland B.V.
Atoomweg 99, 3542 AA Utrecht
The Netherlands