tekkiwear W4 Electric Mosquito Trap Instruction Manual
- June 12, 2024
- TeKKiWear
Table of Contents
tekkiwear W4 Electric Mosquito Trap
Product Information
- Rated voltage: AC220V
- Rated frequency: 50Hz
- Rated power: 5W
- Power supply: DC 5V 0.1A
- Applicable area: 50-100m2
Product Usage Instructions
- Ensure the product is connected to a power source with a rated voltage of AC220V and a frequency of 50Hz.
- Make sure the power supply is connected to the product’s DC 5V 0.1A input.
- Place the product in an area with an applicable area of 50-100m2 for optimal performance.
- Turn on the power switch to activate the product.
- The product will start working, emitting the desired effect within the applicable area.
- If you encounter any issues or require further assistance, refer to the user manual for troubleshooting or contact customer support.
How to use
- Make sure the power cord is plugged in to start the mosquito control, the fan and LED light will start working, unplug the power cord to turn off the equipment.
- For cleaning mosquito debris, please unplug the power firstly, take the lamp with one hand and place it on top of the trash can (in order not to drop the mosquitoes on the ground), with the other hand wipe the box to remove the mosquitoes.
- After cleaning the mosquitoes, you can reassemble the device. The working principle of this product is a photocatalytic mosquito eliminator. The LED lamp attracts the mosquitoes near the light source, the fan produces an air flow to quickly inhale the mosquitoes to the eliminator, then it produces dry dehydration to the insects and they die. It is non-toxic, odorless and smokeless.
Issues requiring attention
- Turn off the light or reduce the light in the area when using the mosquito eliminator, so as to avoid interference from other light sources such as sunlight, televisions, light outside the window, etc. Avoid strong winds (such as fans, air conditioners, etc.) blowing directly on the unit; enclosed spaces produce a better effect.
- It is strictly forbidden to stare at the light source for a long time when the product is operating to avoid glare of the light source in the eyes.
- During use, the mosquito killer should be placed in a place where children cannot touch it. Do not insert fingers or metal objects into it to avoid accidents.
- If the power cord or fan is damaged, send it to a professional for repair or replacement to avoid danger.
- When not in use for a long time, unplug the power cord and put it in a safe place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>